• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 전기설비
• /
• pp.31-33
• /
• 2005

The accelerating of industrial development causes electricity demand to increase. By that power equipments need high power, multi function and intelligence. Also consumers demand for guarantee power supplying of good quality and reasonable operating equipment. Also they require for reliance and stabilization of power facility. Therefore preventive maintenance of electric installation must be developed and improvement of domestic technical level is needed in the maintenance management of equipment. The diagnosis of trouble existence is technique that compares steady state with unusual condition, whereas the prediction technique makes a diagnosis of remaining equipments life. It is difficult for us to diagnose trouble existence of electric installation and to develop prediction method in building because of a wide scope for electric installation in building. And in this paper we will investigate diagnosis and prediction method for only switch part of electric installation in building.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권10호
• /
• pp.530-538
• /
• 2004

A electromagnetic waves are used for sensing in insulation diagnosis at electric machine or equipment. When it a method, waves are transformed into the FFT(Fast Fourier Transform); a kind of the process for data transformation. In a general way, a scientist use frequncy band 30[㎒]～l[㎓] to applied field. If we are measured high frequency band, we will need to a high capacity hardware. Also a antenna has a fault on atmospheric phenomena, outside environment and the like. In this paper We proposed new method for detecting electric equipment faulty state using only electric voltage which is generally measured in the electric and electronic field. It is called the Partition-FFT The analytic method is this first divide measured voltage waves into equal parts, second each deal with give effect to the FFT, finally each results deal with a graphic method and gather graphic. We are compare Partition-FFT with discharge form by tracking tester. As the result it demonstrated that the Partition-FFT is applicable.

• 전기학회논문지P
• /
• 제67권3호
• /
• pp.168-174
• /
• 2018

The performance test for 376MW ESS for frequency regulation currently operating in 13 substations is conducted based on the test procedure in the first and second steps. In the first step, components of ESS is moved to the certification authority where the test equipment is located in order to be proceeded with the test. In the second step, the performance test is conducted manually for the ESS equipments installed on site using the movable measurement equipment, and thus it can only be performed on some limited test items and requires a lot of time and manpower. Therefore, mobile test equipment for ESS(MOTES) is being developed that can perform automatically more test items for ESS in the field using the MOTES, and reduce manpower and time. To do this, an algorithm and a prototype of the operating system(MOS) are also being developed that can control MOTES automatically. In this paper, a development of the MOS prototype is introduced and then a simulation is performed to verify the prototype and its algorithm before the field demonstration.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.107-111
• /
• 2019

FPD(Flat Panel Display) WET(습식) 장비의 히터 사용은 필수로 사용된다. 히터 사용에 따른 단선과 과열로 인한 전기사고가 다발하여 안전적인 전기 계통도 및 인터락이 필요하다. 따라서 본 논문에서는 FPD WET장비에 들어가는 전기 계통도 및 인터락을 제안하였다. 레벨센서, 과열방지기, SSR heater sink와 같은 하드웨어 인터락을 넣었으며, 전기 계통도로써는 ELB-MC-SSR-EOCR-Heater로 구성되어 있다. 인터락 발생시 마그네틱 컨텍터(MC)가 오프되어 Heater의 전원을 차단하는 방식이다. 전기적 과전류 보호장치인 EOCR 과전류, 부족전류, 단선 체크를 하면서 히터에 이상 있을 시 MC를 차단하는 인터락이 구성되어 있다. 이러한 회로 구성 및 인터락은 WET 장비 뿐만 아니라 히터가 들어가는 어떠한 장비에도 유용할 것으로 보인다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.151-156
• /
• 2004

Although insulation equipment is installed, it is inevitable to avoid the stray current because rail is the return way of the direct current that is power of electric motor car. In this paper, by the investigation of the present state of underground facilities, and looking into the reason of electric corrosion, and analysis of corrosion accident cases of inside and outside of the country, fundamental data, to reduce of stray current and to prevent electric corrosion, were accumulated to enhance the safety of railway operation service.

• 대한안전경영과학회지
• /
• 제23권4호
• /
• pp.23-29
• /
• 2021

The purpose of this study is to reduce the probability of occurrence of electric fires as a preemptive preventive measure, and to strengthen the capability of preventing electric fires by strengthening the cooperative function between electric fire-related departments and establishing a cooperative system. In this study, the general aspects of electric fires were identified by reviewing the literature such as ignition mechanisms of electric fires. And the major electrical fires that occurred in the last 10 years were classified into ignition factors (short circuit, overload/overcurrent, and earth leakage/ground fault) and ignition sources (wiring/wiring appliances, electrical equipment/household appliances). And the 4M technique was used to analyze the potential causes of ignition at the fire site and to suggest preventive measures. In the case In this study, out of 48 electrical fires in the past 10 years, 16 short-circuit fires, 3 overload/overcurrent fires, 3 short-circuit and earth fault fires, 16 fires in wiring/wiring appliances, and 10 fires in electrical equipment/home appliances classified as cases. And prevention measures were presented in terms of human, machine, media, and management by using the 4M technique. For the preemptive prevention of electric fires, strengthening the compulsory electrical safety inspection and making it mandatory to report when new or expanding electric facilities, charging a fee for electric safety inspection for detached houses and granting benefits subject to inspection completion, improvement of the electric safety voluntary inspection table and safety indications; It was suggested as a policy to organize and operate electrical safety inspection personnel in a two-person team (mixed), establish a close work cooperation system with related organizations, and strengthen electrical safety education and publicity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.169-171
• /
• 1995

Automatic control equipment in hydro power plant, such as turbine governor or automatic voltage regulator have to act promptly against for variation of power system, so it is necessary to check and test continuously. During last five years, the performance test of automatic control equipment was performed about 20 units of hydro turbine generator. In this process, because it has complex connection and before calibration, signal conditioner was developed as an auxiliary equipment for performance test. It includes function of signal amplifier, transducer, and meters. As a result of use this equipment for electric governor test at soyang-gang hydro power plant, it was possible to find output data equal to old one.

• 한국안전학회지
• /
• 제38권1호
• /
• pp.34-41
• /
• 2023

In this study, S food manufacturing business located in Chungbuk was selected as the subject, and the transition in insulation resistance in major electrical equipment used in this food manufacturing business was analyzed for 4 years (2018-2021). It was confirmed that the insulation resistance decreased over time for all 18 electrical facilities. Insulation resistance changed due to environmental influences such as load characteristics and ambient temperature. Particularly in the case of the food manufacturing industry, it was confirmed that the decrease started after 2 years, although it varied depending on equipment and environmental influences. Furthermore, it was confirmed that management through predicting the management cycle of electrical equipment is possible by deriving a regression equation through regression analysis of insulation resistance measurement values.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2635-2643
• /
• 2011

Current freight electric locomotives (132 ton) of the eco-friendly and can carry large cargo logistics as a means of generation has increased the demand at home and abroad. Especially, Freight electric locomotives to increase the traction, it is easy to mass and rapid transport. In addition, Freight electric locomotives is no exhaust and low noise compared to diesel -electric locomotives and it can be eco-friendly transportation. CO_CO BOGIE of Freight electric locomotives has no the center pivot and Traction_Rod and Spring of CO_CO BOGIE is mounted on the body. These freight electric locomotives to be satisfied with the safety regulations. Carbody development satisfied Implementation of optimum body and collision is the focus. Accordingly, the different approach in the upper and lower carbody structure and interior and equipment placement is needed. On this paper, the contents give explanation of cases on carbody design composed of freight electric locomotives now developed and process of improvement by structure analysis and collision analysis.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1281-1286
• /
• 2010

발전소를 비롯한 각종 플랜트 설비는 많은 기계설비들로 구성되어 고장이 발생할 경우, 고장이 발생된 설비와 시간을 명확하게 파악하기가 쉽지 않다, 또한 고장발생시 정비비용 증가와 함께 설비의 이용률이 감소하여 막대한 경제적 손실이 발생한다. 발전소는 각종 계측센서를 설치하여 설비를 상시 감시하고 있으며, 경고발생 이전 지시치의 변화를 관찰하여 설비의 이상상태를 자동 감지하는 신호기반 고장 조기경보 시스템도 설치된 발전소도 있다. 그러나 고장경보 시스템은 이상신호 발생을 인지하여 설비의 이상상태 여부는 알려주지만 고장원인과 중요도에 대한 정보는 제공하지 않는다. 본 연구에서는 고장분석 기능을 가지고 있는 RCM(Reliability Centered Maintenance) 분석 시스템과 고장경보시스템을 연계하여 설비의 이상신호로부터 고장원인과 정비방법에 대한 정보를 제공하는 고장예측시스템을 개발하고자 한다.