• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.68-68
• /
• 2003

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1459-1467
• /
• 1997

The current on the thin planar structure as an element of the transversely fed electromagnetically coupled(EMC) microstrip dipole array antenna is obtained by using the integral forms of the finite difference time domain(FDTD) method. This method was applied to calculating the optimum current distribution (Doplh-Tchebyscheff distribution) of each dipole element on the feed line as a function of their offset positions for the narrow main beam width and the side beam level below -20 dB. The current on each dipole substitutes for the electric and magnetic current densities on the virtual surface of the FDTD calculation to express the far field intensity, the calculation time and the computer memeory can be reduced to about 80% and 1.3 Mbyte, respectively. The calculated radiation patterns are compared to the measured values and these are in good agreement.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.939-947
• /
• 2001

본 논문에서는 외부 다이폴 파원에 의해 합체의 개구를 통하여 침투하는 침투 전계와 함체의 공진 주파수 특성을 검토하고 있다. 이론해석 방법으로서는 외부 다이폴 파원의 전류분포 및 함체에 있는 개구의 개구면 전계분포에 관한 연립 적분방정식을 Galerkin의 모멘트 법으로 해석하고 있다. 이론해석의 결과, 침투전계는 개구면 부근에서 가장 크며, 함체의 공진 주파수는 개구가 없는 경우의 공진 주파수와 거의 일치하므로 함체의 크기가 결정되면 공진 주파수의 추정이 가능하다는 것을 알 수 있었다. 이론해석의 타당성을 화인하기 위하여 함체의 내부 전계 및 공진 주파수의 실험치와도 비교하고 있다.

• 자원환경지질
• /
• 제33권6호
• /
• pp.525-536
• /
• 2000

Electromagnetic and electric surveys were performed to reveal the deep structure of the Yangsan fault in the Bong-gye and Unyang areas, Kyeongnam Province, Korea. Especially, high-frequency magnetotelluric (HFMT) method of EM survey was mainly employed to study the deep subsurface configuration of Yangsan fault. HFMT survey was performed at 25 points of spacing 50 m, making 1.3 km survey line in Unyang area and 13 points of spacing 50 m, making 0.6 km survey line in Bong-gye area. Two 2-D cross-sections (Unyang and Bong-gye areas) were achieved as results. Electric survey by dipole-dipole array was performed to study the structure of shallow subsurface and compare the results with HFMT surveys. The results of HFMT and electric surveys show that Yangsan fault is a geologic boundary. It is very narrow and steep (about $80^{\circ}C$), and extends to 1~1.5 km depth.

• 한국전자파학회논문지
• /
• 제12권1호
• /
• pp.50-57
• /
• 2001

본 논문에서는 광대역 특성을 가지는 원편과 마이크로스트립 EMC 크로스 다이폴 어레이 안테나의 설계에 관하여 기술하고 있다. 광대역 특성과 원편과 특성을 실현하기 위해, 급전선과 전자기적으로 결합하는 크로스다이폴 소자를 제안한다. 원편파 EMC 크로스 다이폴 소자의 최적 설계 파라미터들은 FDTD와 앙상블에 의해 계산되었다. 어레이에 있어서 전계의 균일한 개구분포를 얻기 위하여, 크로스 다이폴 소자들을 마이크로스트립 급전선로를 중심으로 하여 지그재그로 배치하는 Offset 기법을 사용하였다. 20소자 어레이 설계로부터 12 GHz에서 계산된 축비와 이득은 각각 0.1 dB와 9.9 dBi 였다. 제작된 20소자 어레이 안테나의 주파수 특성이 측정되었고 계산 결과와 잘 일치하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.439-442
• /
• 2002

나일론 m형의 폴리아미드계 고분자의 경우 m의 수가 홀수일 때 N-H와 C=O 사이의 dipole 배열에 의하여 거대한 dipole moment가 나타나기 때문에 극성 결정구조를 나타내게 되며(1), 그 중에서도 특히 나일론 7과 11은 압전성을 나타낸다. 한편, 나일론 11[poly(undecanolactam)]은 $\alpha$, $\beta$, ν, $\delta$, $\delta$' 형과 같이 적어도 다섯 개의 결정형태를 갖는데[2-3], 이러한 여러 가지의 결정형태는 시료의 제조조건과 열처리 조건 등에 따라서 달라진다. (중략)

• 한국광학회지
• /
• 제11권1호
• /
• pp.1-5
• /
• 2000

전기 쌍극자들로 이루어진 물질계의 총 해밀토니안을 쿨롱게이지내에서 정의하고, 유니타리 변환을 이용하여 쌍극자 근사를 가정할 때 각 쌍극자들에 의한 편극이 궁극적으로 계의 상호작용 해밀토니안에 어떻게 영향을 미치는가를 살펴본다.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1284-1293
• /
• 1997

The electrostatic effect on particle deposition onto a heated, Horizontal free-standing wafer surface was investigated numerically. The deposition mechanisms considered were convection, Brownian and turbulent diffusion, sedimentation, thermophoresis and electrostatic force. The electric charge on particle needed to calculate the electrostatic migration velocity induced by the local electric field was assumed to be the Boltzmann equilibrium charge. The electrostatic forces acted upon the particle included the Coulombic, image, dielectrophoretic and dipole-dipole forces based on the assumption that the particle and wafer surface are conducting. The electric potential distribution needed to calculate the local electric field around the wafer was calculated from the Laplace equation. The averaged and local deposition velocities were obtained for a temperature difference of 0-10 K and an applied voltage of 0-1000 v.The numerical results were then compared with those of the present suggested approximate model and the available experimental data. The comparison showed relatively good agreement between them.

• 한국전기전자재료학회논문지
• /
• 제23권6호
• /
• pp.491-496
• /
• 2010

The relaxation behavior of aligned electric dipoles in a mixed polymer of P2ANS with P(VDF-TrFE) is studied with optical second harmonic generation (SHG). In this work, a macroscopic noncentrosymmetry of the spin coated film was achieved by an electrical poling. The relaxation of induced polar order of nonlinear optic(NLO) chromophores after poling leads to an insufficient long-term stability of NLO properties. In this work, we develop a new technique to suppress such kind of dipole relaxation in a poled polymer. We found that the poled dipoles in a NLO polymer were effectively immobilized by the internal electric field created by a thermally annealed ferroelectric polymer. The long-term stability in a mixed system of NLO polymer/ferroelectric polymer was successively accomplished by a series of thermal treatments applied to the mixed polymer system at a temperature of $140^{\circ}C$ for at least 1hour after poling.

• 한국철도학회논문집
• /
• 제5권1호
• /
• pp.26-31
• /
• 2002

The more sophisticated patterns of propagation model is presented in this paper, which includes three different source characteristics (spherical, cosine and dipole). The spherical, cosine and dipole radiation characteristics compared, and sound event level and the maximum sound level are calculated by experiment and calculation. It is shown that patterns of propagation have dipole characteristics for low speed range (below about 150Km/h) at electric multiple system. We know that push-pull high speed system has cosine characteristics of noise propagation at low speed range (below about 200Km/h).