• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.26-35
• /
• 2007

The vehicle of urban transit is a complex system that consists of various electric, electronic, and mechanical equipments, and the maintenance cost of this complex and large-scale system generally occupies sixty percent of the LCC (Life Cycle Cost). For reasonable establishing of maintenance strategies, safety security and cost limitation must be considered at the same time. The concept of system reliability has been introduced and optimized as the key of reasonable maintenance strategies. For optimization, three preceding studies were accomplished; standardizing a maintenance classification, constructing RBD (Reliability Block Diagram) of VVVF (Variable Voltage Variable Frequency) urban transit, and developing a web based reliability evaluation system. Historical maintenance data in terms of reliability index can be derived from the web based reliability evaluation system. In this paper, we propose applying inverse problem analysis method and hybrid neuro-genetic algorithm to system reliability optimization for using historical maintenance data in database of web based system. Feed-forward multi-layer neural networks trained by back propagation are used to find out the relationship between several component reliability (input) and system reliability (output) of structural system. The inverse problem can be formulated by using neural network. One of the neural network training algorithms, the back propagation algorithm, can attain stable and quick convergence during training process. Genetic algorithm is used to find the minimum square error.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.81-86
• /
• 2014

A smart phone subscriber needs wide bandwidth services for more fast data communication on the internet. The conventional MIMO system is now developing to resolve these problems with limited device space for antenna and frequency band environment reserved. One of way to make it practically is to add the number of antennas theoretically. But it is difficult to increase the antenna element as a limited space on the system. Therefore an active beam forming scheme is known as a way of constructing a Compact MIMO system for that. In this paper, the fast switching control block was suggested to adjust a reactance of the antenna element and verified experimentally the effects by switching signal on an orthogonal beam forming through a spatial domain.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1249-1255
• /
• 2010

An ultra high- pressure system generally consists of a hydraulic power unit, an oil supply unit, an electrical power supply device, and an electrical control device. The hydraulic power unit supplies the hydraulic power to the intensifier to create generate ultra high pressure. The intensifier amplifies increases the pressure using the oil supplied from by the hydraulic power unit. The electrical supply devices and control devices maintain are provided for the electric motors, valves, and sensors. In this study, instead of a flow-control device, a pressure-control type device was mounted on a manifold block in the hydraulic power unit instead of the flow-control type. A servo valve was fitted in the intensifier, and the performance characteristics of the intensifier varied according to the variations of in the pressure cycle and with the temperature of the operating oil in the hydraulic power unit.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.5
• /
• pp.459-469
• /
• 2017

A real scale leakage test facility was developed to study the leak signal characteristics of water supply pipelines, and then leak tests were carried out. The facility was designed to overcome the limited experimental circumstances of domestic water supply pipeline experimental facilities. The length of the pipeline, which was installed as a straight line, is 280m. Six pipes were installed on a 70m interval with different pipe material and diameters that are DCIP(D200, D150, D100, D80), PE(D75) and PVC(D75).The intensity of the leakage is adjusted by changing the size of the leak hole and the opening rate of ball valve. Various pressure conditions were simulated using a pressure reducing valve.To minimize external noise sources which, deteriorate the quality of measured leak signal, the facility was built at a quiet area, where traffic and water consumption by customers is relatively rare. In addition, the usage of electric equipment was minimized to block out noise and the facility was operated using manual mode. From the experimental results of measured leakage signal at the facility, it was found that the signal intensity weakened and the signal of high frequency band attenuated as the distance from the water leakage point increased.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.3
• /
• pp.24-30
• /
• 1993

The necessity of ultrasonic inspection to detect the cracks in turbine blade is being increased as the forced outage of nuclear power plants have been occurred due to blade failure in turbine components. However, the complex blade root geometry causes the ultrasonic inspection technique not to be established yet and much effort is required to set up a more reliable inspection. In this paper, the ultrasonic inspection technique for flaw detectability, skew angle effect, identification of flaw and geometric signal have been investigated with a test block and discussed the interpretation of ultrasonic signal through the acquisition and analysis of RF waveform. The experimental results show that the proper examination procedure can be established. It is required that the skew angle is essential to decrease the effect of signals from the complex blade geometry. The present results of this study can be applied to the site inspection without blade disassembly.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.41-45
• /
• 2016

Electrical equipment in factories, buildings, etc. with the development of the industry has become a large capacity. By the development, electric load also become diversified and there is also highly functional requirements being electrical equipment. Particularly in the small and medium-sized circuit breakers, tend to preferentially consider the economy stands out and improvements in safety, ease of mounting and connection through the modularity of the basic dimensions compact and cost to block expansion of the scope of the development of capacity, etc. The product having a competitive has been strongly required. In order to implement the circuit breakers of breaking capacity and compact at the same time taking into account the economic development of this technology applied to the current-limiting mechanism is essential budget or the current limiting mechanism is currently available mechanisms applicable to small and medium-sized frame (frame) can not do it. In this paper, at the same time satisfying the economic efficiency, by minimizing the load force of the moving contactor (moving contactor) to be applied to small and medium frame other hand to secure the economical efficiency without using high speed contact parting acceleration of the moving contactor conventional current-limiting mechanism, and to develop a current-limiting mechanism that can be satisfied with the same or higher performance to meet the needs of the market.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.10 no.2
• /
• pp.172-177
• /
• 2010

Background: Damages of trigeminal nerve, particularly inferior alveolar nerve and lingual nerve, could occur following dental procedures. In some cases, nerve damage may happen as a complication of the local anesthetic injection itself and not of the surgical procedure. Methods: From September 2006 to August 2010, 5 cases of inferior alveolar nerve and lingual nerve damages, which were assumed to happen solely due to local anesthesia, were reviewed. All cases were referred to Division of Oral and Maxillofacial Surgery, Department of Dentistry, Hanyang University Medical Center for legal authentication in the process of criminal procedure. Results: In all five cases, patients complained of altered sensation occurred in the distribution of the inferior alveolar or lingual nerve following block anesthesia. The local anesthetics were 2% lidocaine with 1 : 100,000 epinephrine and the amount of local anesthetics, which were used during injection, were varied. Most of patients experienced the electric stimulation during injection. Recovery was poor and professional supportive care was mostly absent. Conclusions: Dental practitioners should consider that the surgical procedure caused the trigeminal nerve damage, however, dental local anesthesia for inferior alveolar nerve and lingual nerve could be one of the causes for damages. The various mechanisms for nerve damages by local anesthesia are thoroughly discussed.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.981-987
• /
• 2016

We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.311-319
• /
• 2005

In order to examine the effects of advanced periodontitis on the dental pulps, 38 extracted human teeth were examined histologically. The 38 teeth had a positive or negative state in the electric pulp test(EPT). In addition, almost of the 38 teeth had a deep pocket and severe mobility, and floating state. A medical and dental history was elicited. The extracted teeth fixed in 10% neutral formalin solution. The general tissue processing method was followed. The tissue block including the teeth was prepared for optical microscopy using hematoxillin-eosin staining. Among the 38 periodontally involved teeth, the dental pulps were respectively intact in 12(31%), and a pulp stone(or linear calcifications) was found in 18 teeeth(47%). In addition, 17 teeth(44%) had pulps exhibiting inflammatory reactions with varying intensities, such as hyperemia, pulp abscess, pulp necrosis. Among the 38 periodontally involved teeth, 37 teeth tested a positive to the EPT, and 7 teeth tested negative. The EPT positive 37 teeth had various histological features such as 7 normal pulp(18%), 17 pulp stone(44%), 1 hyperemia (2%), 9 pulpitis(23%), 5 root resorption(13%), 3 pulp abscess(7%), and 3 pulp necrosis(7%), In conclusion, it is suggested that in the EPT positive teeth, advanced periodontally involved teeth can cause inflammation of the dental pulp.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.16-28
• /
• 2014

This paper presents a novel high-power-factor circuit topology of AC to AC current-fed type high frequency resonant inverter which includes the function of power factor correction(PFC) in the proposed inverter to operate the AC input block with high power factor. The proposed circuit topology of AC to AC current fed type high resonant inverter removes DC link electrolytic capacitor and has also the one of power factor correction(PFC) in the inverter circuit without an additional PFC circuit since the input current by constituting it in parallel as an unit inverter, which assumes the class-E high frequency resonant inverter of conventional current-fed type, flows in the form of the resultant current flowing through each constant current reactor($L_{d1}$, $L_{d2}$). The circuit analysis of proposed inverter is generally described by adopting the normalized parameters and the evaluation of its operating characteristics are conducted by using the parameters such as the ratio of switching and resonant frequency(${\mu}$), coupling coefficient(k) and so on. An example of procedure for circuit design based on the characteristic values obtained from the theoretical analysis is presented. To confirm the validity of the theoretical analysis, the experimental results are also presented. In the future, the proposed inverter shows it can be practically used as power supply system for induction heating application, DC-DC converter etc.