• Journal of Climate Change Research
• /
• v.1 no.3
• /
• pp.189-203
• /
• 2010

The objective of this study is the estimate of $CO_2$ emissions by the energy consumption of functional technology introduced by classifying energy use in households according to functions as well as energy resources. This study also intends to provide the practical basis data in order to establish specific alternatives for GHG mitigation in residential sector with examining the cause analysis affecting $CO_2$ emission increases from 1995 to 2007. The results of this study show a 6.6% increase in the total $CO_2$ from 60,636 thousand tons in 1995 to 64,611 thousand tons in 2007 by using energy in residential sector. Heating is the greatest $CO_2$ emission sector by use, followed electric appliances, cooking, lighting and cooling. Heating sector shows 56.6% reductions from 71.5% in 1995 and as do cooling and electric home appliances, with a 2.4% increase from 0.6% and a 21.8% increase from 14.2% respectively. To analyze factors resulted in $CO_2$ emissions in residential sector, the relevant indicator change rate from 2005 to 2007 was examined. The results find that population, the number of household, housing areas, family patterns, and family income resulted in the $CO_2$ emissions increase in residential sector from 1995 to 2007. On the other hand, carbon intensity and energy intensity contribute to $CO_2$ reduction in residential sector with -2% and -38.7% respectively because of the energy conversion and the improvement of energy efficiency in electronic appliances. This study can be used as a reference when taken account of the reality and considered the introduction of highly effective measures to increase the possibility of mitigation potential in residential sector hereafter.

• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.40-47
• /
• 2009

Nowadays the diversity and large-capacity of electric appliances are strong effect on electrical fires augment in an alarming way. But, as the inactive response characteristics of the existing RCD (Residual Current protective Device) used on low voltage power distribution system, so control of overload and electric short circuit faults, major causes of electrical fires, are not enough. Therefore, this paper is confirmed the unreliability of the existing RCD by electrical fault simulator and is proposed a Electrical Fire Disaster Prevention Device (EFDPD) by using a high precision current sensor (namely, reed switch) for the prevention of electrical disasters in low voltage power distribution system caused by overload or electric short circuit faults. The sensitive reed switch in the proposed EFDPD exactly detects the increased magnetic flux with the overload or the short current caused by a number of electrical faults, and the following, the EFDPD has double protection function which operates self circuit breaker or rapidly cuts off the existing RCD. The proposed EFDPD is confirmed the excellent characteristics in response velocity and accuracy in comparison with the conventional circuit breaker through various operation performance analysis. The proposed EFDPD can also prevent electrical disaster, like as electrical fires, which resulted from the malfunction and inactive response characteristics of the existing RCD.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.407-413
• /
• 2011

This paper presents an electrical power monitoring system for home energy management and an automatic appliance-identification algorithm based on the electricity-usage patterns collected during the monitoring tests. This paper also discusses the results of the field tests of which the proposed system was voluntarily deployed at 13 homes. The proposed monitoring system periodically measures the amount of power consumption of each appliance with a pre-specified time interval and effectively displays the essential information provided by the monitored data which is required users to know in order to save power consumption. Regarding the field tests of the monitoring system, the households responded that the system was useful in saving electricity and especially the electricity-usage patterns per appliances. They also considered that the predicted amount of the monthly power consumption was effective. The proposed appliance-identification algorithm uses 4 patterns: Zero-Crossing Rate(ZC), Variation of On State(VO), Slope of On State(SO) and Duty Cycle(DC), which are applied over the 2 hour interval with 25% of it on state, and it yielded 82.1% of success rate in identifying 5 kinds of appliances: refrigerator, TV, electric rice-cooker, kimchi-refrigerator and washing machine.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2011

Power Line Communication (PLC) is a system for carrying data on a conductor used for electric power transmission. Recently, PLC has received much attention due to connection efficiency and possibility of extension. It can be used for not only alternative communication, in which communication line is not sufficient, but also for communication between home appliances. Korea Electronic Power Cooperation (KEPCO) is constructing the system, which automatically collects values of power consumption of every household. Due to the randomness and complicated physical characteristics of PLC protocol (KS X4600-1), it has been believed that the current PLC is secure in the sense that it is hard that an attacker guesses or modifies the value of power consumption. However, we show that the randomness of the protocol is closely related to state of the communication line and thus anyone can easily guess the randomness by checking the state of the communication line. In order to analyze the security of PLC, we study the protocol in detail and show some vulnerability. In addition, we suggest that PLC needs more secure protocol on higher layers. We expect that the study of PLC help in designing more secure protocol as well.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.122-127
• /
• 2006

A series of conductive filler were prepared with electroless plating method. Base conductive materials of the filler were nickel and copper. The cores were prepared with Nylon 6 and rayon in different aspect ratio. Also, various complexes were made with ABS resin and conductive filler with different filler feed ratio. The conductivity of the filler was measured with conductivity analyzer and the size distributions of fillers was measured with laser particle size analyzer. Electromagnetic wave shielding efficiency of each complex film was measured with flange circular coaxial transmission line sample holder within the 1MHz$\sim$1GHz bandwidth range. From this study, the conductivity of filers surpass that of other carbon films. It is available that the filler made of fibrous materials can be applied in plastic molding industry of electric appliances as a EMI filler.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.259-265
• /
• 2007

Systematic components for implementing ubiquitous computing, for example, electronic devices, electric home appliances, and controllers, etc, are consist of not only circuits but also softwares expected to do some special system-controlling functions, and these softwares used to be called like as embedded software. Because embedded software is a core component controlling systems, the codes or control flows should be protected from being opened to the public or modified. Embedded software security can be divided into 2 parts: first is the unauthorized access to development site and embedded software, second is the unauthorized disclosure or modification. And this research is related to the first aspect of them.This paper proposes some security check requirements related to embedded software development site by analyzing the ALC_DVS.1 of the ISO/IEC 15408 and Base Practices (BPs) of the ISO/IEC 21827. By applying this research, we expect to protect unauthorized modification of embedded software indirectly.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.4
• /
• pp.275-284
• /
• 2017

As the high-level of the industrial and information age, the electricity become the indispensable element in the daily life including OA, FA, and computer, electric home appliances, and etc. In particular, The continuous use of the high capacity power supply system by applying a Switching Mode Power Supply(SMPS) according to the increase of the secondary side output terminal of the power load of the refrigerator of the home appliance or automation of the plant is pressed. The purpose using the way with this kind of high-capacity altogether is to supply the output voltage and output current regardless of the input voltage or to the external environmental conditions of the secondary-side load fluctuation. In this paper, a combination of a Buck Converter with Boost Converter by making a constant current source to control the inductor current and maintain stable power supply side operating characteristics, when load variations. While maintaining the same characteristics as conventional Buck Converter, and offer a DC-DC Converter system with the new switch pattern having a wide output range capable of operating in Buck-Boost Converter. In addition, after theoretical analysis, we carry out simulations and experiments to verify the validity and performance comparing with a conventional DC-to-DC converter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.213-221
• /
• 2004

In recent years, since more and more diode rectifiers with smoothing dc capacitor are used in electronic equipments, household appliances and ac drives, harmonics generated by these loads have become a major issue. In addition, 3-phase 4-wire system is widely employed in distributing electric energy to several office building and manufacturing plants. This systems show excessive currents in the neutral. These neutral currents are fundamentally third harmonic, and their presence is tied to wiring failure, elevating of neutral potentials, transformer overheating, etc. In response to the concerns, this paper proposes a series active power filter scheme based on direct compensating voltage extraction method and the advantage of this control algorithm is direct extraction of compensation voltage reference without multiplying gain. Therefore, the calculation of the compensation voltage reference will becom much simpler than other control algorithm. To verify the effectiveness of the proposed algorithm, a prototype active power filter is built and some experiments are carried out.

• The Research Journal of the Costume Culture
• /
• v.4 no.3
• /
• pp.427-445
• /
• 1996

According as the fashion at the latter half part of the 20th century is diversified and made into high-class gradually, it is demanding the individuality of each one. Especially, since the beginning of 1980s, fashion came to represent the restoration mood in a modern style because of the popularization of post-modernism. And with this, it came to result in the reappearance of minimalism which was one of anti-culture in 1960s. In this study, this researcher grasped the appearance background, concept and structural concept of minimalism, and tried to study the influence that he minimalism had on fashion in the flow of fashion over the first half period of the 20th century. Minimalism is the fine art trend of American characteristic which quicked by the meeting of European culture and American culture, according as the new avant-grade art of Europe moved to America after World War II Minimalism which appeared, refusing the mechanisation, industrialization and mass production of America and the falsehood of consciousness and sensitivity under existing system remained obscure by the pop art which is the commercial fine art of same period, but it came to expand the domain of work possibility of modern fine art, and it became the basis of appearance of post-modernism. Minimalism has 4 kinds of structural features which are nonside nature, repetitiousness and environment nature with 3 dimensional feature which is issue nature. Minimalism is appearing in the exfcellent and future-oriented fashon of Andre Kureju t the time of 1960 well. Then science revolution and minimalism aroused the mini-revolution, and they made the compact radio in electric home appliances and the miniskirt in fashion appear. The features of minimal fashion as Retro '60' which appeared in the decedent mood with the 21st century just before on are as follows: First, the are the pursuit of concise plastic line. Second, it is the use of high tech material Third, the miniaturization in size amy be enumerated. Minimal fashion will appear s the positive confrontation from of mankind as the optimistic viewpoint about feature in the situation hat environment was destroyed and the resources were exhausted.

• 보존과학연구
• /
• s.31
• /
• pp.9-16
• /
• 2010

The Annals of the Joseon Dynasty is one of the World Heritage which should be conserved well. However, some of wax treated volume of the Annals of the Joseon Dynasty have damaged seriously. Currently a variety of efforts to conserve and restore the injured volumes are continued and many studies about the aging mechanism of the wax treated volume have being progressed. The analysis of VOCs (Volatile Organic Compounds) emitted from paper cultural heritage is one of the methods to understand the degradation pathway of paper cultural heritage. The analysis of VOCs emitted from paper cultural heritage has been mainly conducted by SPME (Solid Phase Microextraction) method. SPME is potable and simple method but it is difficult to collect all VOCs emitted from a book such as the Annals of Joseon Dynasty. The dynamic chamber system has generally used to do analysis of VOCs emitted from the building materials, furniture and electric appliances. The chamber system is possible to do quantitative and qualitative analysis by a continuous $N_2$ gas flow and the proper chamber which is able to gather all VOCs emitted from the Annals of the Joseon Dynasty. In this study, the most material among detected VOCs was Naphthalene. Naphthalene has used to prevent organic cultural heritage from being damaged by various microbes for a long time. Apart from Naphthalene, main VOCs were Acetic acid, 2-Chloroethanol, 2-Bromoethanol, Furfural, 1-Methylnaphthalene, Azulene, and 2,4-Dioctylphenol. Of these VOCs, Furfural especially was known for a marker which represents a different emission rate according to the aging level.