• Steel and Composite Structures
• /
• 제20권4호
• /
• pp.931-950
• /
• 2016

Ratcheting deformation of pressurized Z2CND18.12N stainless steel $90^{\circ}$ elbow pipe with local wall thinning subjected to constant internal pressure and reversed bending was studied using finite element analysis. Chen-Jiao-Kim (CJK) kinematic hardening model, which was used to simulate ratcheting behavior of pressurized $90^{\circ}$ elbow pipe with local wall thinning at extrados, flanks and intrados, was implemented into finite element software ANSYS. The local wall thinning was located at extrados, flanks and intrados of $90^{\circ}$ elbow pipe, whose geometry was rectangular cross-section. The effect of depth, axial length and circumferential angle of local wall thinning at extrados, flanks and intrados on the ratcheting behaviors of $90^{\circ}$ elbow pipe were studied in this paper. Three-dimensional elastic-plastic analysis with Chen-Jiao-Kim (CJK) kinematic hardening model was carried out to evaluate structural ratcheting behaviors. The results indicated that ratcheting strain was generated mainly along the hoop direction, while axial ratcheting strain was relatively small.

• 대한물리의학회지
• /
• 제16권1호
• /
• pp.9-16
• /
• 2021

PURPOSE: This study was to investigate the effect of applying neck flexion during elbow flexion exercise on muscle activity of the biceps brachii, the anterior deltoid and the sternocleidomastoid (SCM). METHODS: Twenty healthy adults participated in this study. The subjects measured %MVIC (Maximal volumetric control) and collected the maximum electromyography (EMG) values in the biceps brachii, anterior deltoid, SCM. The first action was to sit in a sitting position with the eyes facing front and maintained the weight of each section by performing elbow flexion using a tension gauge. The second action was to sit in a sitting position with the head down and maintained the weight of each section by performing elbow flexion using a tension gauge. Paired T-test was used for comparison of the before-and-after neck flexion to analyze the muscle activity of the Biceps brachii of next flexion and extension, the SCM, and the Anterior deltoid during elbow flexion exercise. The Repeated measured ANOVA was used for comparing %MVIC in each muscle. The significance level (?) was set at .05. RESULTS: Neck flexion during elbow flexion increased the muscle activity of the Biceps brachii and Anterior Deltoid muscle in the maximal muscle strength 50 ~ 60%, 70 ~ 80% and decreased the muscle activity of the SCM (p < .05). CONCLUSION: The applic has been confirmed to reduce the mobilization of the SCM and increase the mobilization of the Biceps brachii and Anterior Deltoid to increase the mobilization. Therefore, it seems effective to apply neck flexion when elbow flexion exercise.

• 대한물리의학회지
• /
• 제4권4호
• /
• pp.209-214
• /
• 2009

Purpose：The purpose of this study are analysis characteristic of grasping power with each different elbow flexion degree and grasping power with each different elbow each different hand position and announcement. Methods：Measuring about 10cm wide open position with both feet for each elbow in the line positions of the $0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$, and forearm position of supination, mid position, pronation is of the order. Results：The averge position of maximal grip strength was $0^{\circ}$ of elbow flexion with mid position in male and $90^{\circ}$ of elbow flexion with mid position in female. Grip strength in change of wrist position according to elbow flexion was significant difference(P<0.05). Grip strength in change of wrist position according to elbow flexion by sex was significant difference(P<0.05) Conclusion：When the elbow has flexion with $0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$ then grasping power has a intimate relation with forearm position. Grasping power with forearm supination, pronation and mid position also has a intimate relation with elbow flexion.

• 한국임상수의학회지
• /
• 제21권4호
• /
• pp.406-408
• /
• 2004

A nine-month-old male Jindo with non weight-bearing on the right forelimb in flexed position, pain and edema of the elbow, and resist elbow extension was brought to the Veterinary Teaching Hospital, Chungbuk National University. Elbow radiographs showed loss of humeroradial joint space and lateral displacement of the radius and ulna. Closed reduction was reported the best therapy in most cases of luxation of the elbow but conservative reduction was impossible. Open reduction of the luxated elbow was performed and ruptured collateral ligaments were identified. Displaced elbow was required bloody surgical operation and gentle reduction to restore elbow joint. Internal reduction of choice for elbow luxation with rupture of collateral ligament in the dog was a double locking-loop suture pattern. To ensure secure grasping of parallel bundles of ligament fibers to transverse bites of each suture were placed superficial to the longitudinal bites. All ligaments were repaired with 3-metric (size 2 USP) monofilament polypropylene suture. No complications have been noted during a five-month follow up.

• 한국압력기기공학회 논문집
• /
• 제18권1호
• /
• pp.26-35
• /
• 2022

When piping system in a nuclear power plant is subjected to a beyond design seismic condition, it is important to accurately determine possibility of crack initiation and, if initiation occurs, its location and time. From recent experimental works on elbow pipes, it was found that the crack initiation location and crack propagation direction of the SA403 WP316 stainless steel elbow pipe were affected by the pipe thickness. In this paper, the crack initiation location and crack propagation direction for SA403 WP316 stainless steel elbow pipes with different thickness were analyzed via elastic-plastic finite element analysis. Based on FE results, the effect of the pipe thickness on different crack initiation location and crack propagation direction was analyzed using ovality, stress and strain components. It was also confirmed that the presence of internal pressure had no effect on the crack initiation location and crack propagation direction.

• 대한물리의학회지
• /
• 제13권2호
• /
• pp.109-114
• /
• 2018

PURPOSE: The purpose of this study conducted the experiment to check change of ability to grip depending on normal male adult's elbow flexion angle and the effect of kinesiology tape application. METHODS: Normal male adults who studies in H university where located in Kyoungbook state and did not have any factors like fracture, osteoarthritis, deformities and non-neurologic issue which might influence the result of this study were selected as subjects. Elbow of subjects were applied by 5cm wideness kinesiology tape and elbow's angle was selected by $0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$ using Goniometer. The change of ability to grip depending on flexion was measured by an electronic dynamometer before and after taping. RESULTS: Before and after taping elbow joint, both ability to grip decrease in more flexion angle and $135^{\circ}$ of elbow flexion was lowest value, 299.84N. Using kinesiology tape, neutral position $0^{\circ}$ was the highest value, 352.26N. The lowest was 331.68N on $135^{\circ}$. According to verifying the change of ability to grip depending on elbow flexion and the change of ability to grip after taping with paired t-test, the result was p<.05, there was significant difference. CONCLUSION: Using electronic dynamometer and estimating the ability to grip after and before kinesiology tape, the ability to grip decrease in more elbow flexion. The ability to grip after using kinesiology tape was relatively higher than before taping.

• The Journal of Korean Physical Therapy
• /
• 제15권4호
• /
• pp.312-318
• /
• 2003

The purpose of this study were to determine the effect on grip and pinch strength with elbow and wrist angle change. 112 college students, 88 males, and 24 females aged 19 to 34 years, participated in the study. A Grip and pinch strength was measured in two elbow position($0^{\circ}$ and $90^{\circ}$) and three wrist position($80^{\circ},\;0^{\circ},\;23^{\circ}$). The data were analyzed by mean and deviation, and t-test using the PC/SAS system. These results were obtained as follows; 1. There was a more strength grip and pinch power in $0^{\circ}$ than $90^{\circ}$ elbow flexion at three wrist angle. 2. There was a significant high grip and pinch strength in $23^{\circ}$ dorsiflexion among three wrist angle(p<0.01). 3. The grip and pinch strength power was measured higher in male than female every elbow and wrist angle(p<0.01).

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.586-593
• /
• 2007

This paper proposes closed-form plastic limit load solutions for elbow with local wall thinning at extrados under internal pressure. This work was performed using 3-dimensional, small strain FE analyses based on elastic-perfectly plastic materials. The wide range of elbow and local wall thinning geometries are considered. For systematic analyses for effect of axial thinning extent on limit loads, two limiting cases are considered; a sufficiently long thinning, and the circumferential part-through surface crack. Then, the closed-form plastic limit load solutions for intermediate thinning are obtained by using result of two limiting cases. The effect of axial thinning extent for elbow on plastic limit load is highlighted by comparing with that for straight pipes. Although the proposed limit load solutions are developed for the case when local wall thinning exist in the center of elbow, it is also shown that they can be applied to the case when local wall thinning exists anywhere within elbow.

• The Journal of Korean Physical Therapy
• /
• 제11권3호
• /
• pp.89-96
• /
• 1999

The purpose of this study was to examine the effects of neuromuscular electrical stimulation(NMES) on the spasticity of elbow flexor. Ten spastic hemiplegia who have been at EUL-JI medical college hospital in Taejon with age range of 35 to 70 years$(56.8\pm9.5)$, were participated in this study. The subjects (5male, 5female) took neuromuscular electrical stimulation therapy on the triceps of the affected elbow. To compare the effect of the treatment, the grade of spasticity of affected elbow flexor was measured at pre-treatment and the end of each weeks using modified Ashworth scale. Then, the range of extension of the affected elbow was measured at pre-treatmen and the end of each weeks using full circle goniometer. The data were analyzed with ANOVA to determine significant differences with the passage of time. The results were as follows: 1. ANOVA test showed significant differences in reducing spasticity of NMES group with the passage of time (p<.01). 2. ANOVA test showed significant differences in increasing range of motion with the passage of time of NMES group(p<.01). The neuromuscular electrical stimulation is a effective method to reduce the spasticity of elbow flexor.

• Corrosion Science and Technology
• /
• 제16권1호
• /
• pp.23-30
• /
• 2017

The inhibition effect of thioureido imidazoline inhibitor (TAI) for flow accelerated corrosion (FAC) at different locations for an X65 carbon steel elbow was studied by array electrode and computational fluid dynamics (CFD) simulations. The distribution of the inhibition efficiency measured by electrochemical impedance spectroscopy (EIS) is in good accordance with the distribution of the hydrodynamic parameters at the elbow. The inhibition efficiencies at the outer wall are higher than those at the inner wall meaning that the lower inhibition efficiency is associated with a higher flow velocity, shear stress, and turbulent kinetic energy at the inner wall of the elbow, as well as secondary flow at the elbow rather than the mass transport of inhibitor molecules. Compared to the static condition, the inhibition efficiency of TAI for FAC was relatively low. It is also due to a drastic turbulence flow and high wall shear stress during the FAC test, which prevents the adsorption of inhibitor and/or damages the adsorbed inhibitor film.