• 한국환경복원기술학회지
• /
• 제5권4호
• /
• pp.19-30
• /
• 2002

The stability of slope using root-pile like to the reinforcements is affected by the interaction behavior mechanism of soil-reinforcements. Through the studying on the interaction in joint of its, therefore, the control roles can be find out in installed slope. In study, the stress level ratio based on the insert angle of installed reinforcements in soil used to numerical analysis, which was results from the duty direct shear test in Lab. The maximum shear strain variation on the reinforcements was observed at insert angle, which was approximately similar to the calculated angle based on the equation proposed by the Jewell. The elasto-plastic joint model on the contact area of soil-reinforcements was presumed, the reinforced soil assumed non-linear elastic model and the reinforcements supposed elastic model, respectively. The finite element analysis of assumed models was performed. The shear strain variation of non-reinforced state obtained by the FEM analysis including elasto-plastic joint elements were shown the rationality of general limit equilibrium analysis for the slope failure mode on driving zone and resistance zone, which based on the stress level step according to failure ratio. Through the variation of shear strain for the variation of inserting angle of reinforcements, the different mechanism on the bending and the shear resistance of reinforcements was shown fair possibility.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.169-172
• /
• 2015

This paper presents a numerical investigation on kerosene-air mixture detonation and behaviors of thermal elasto-plstic thin metal tube under detonation loading based on multi-material analysis. The detonation loading is modeled by the kerosene-air mixture detonation which is compared with CJ condition and experimental cell size. And the thermal softening effect on elasto-plstic model of metal tube is indicated by different dynamic response of detonation loaded tube in various temperature and tube thickness.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1455-1464
• /
• 1994

A new and efficient algorithm for the integration of the thermal-elasto-plastic constitutive equation is proposed. While it falls into the category of the return mapping method, the algorithm adopts the three point approximation of plastic corrector within one time increment step. The results of its application to a von Mises-type thermal-elasto-plastic model with combined hardening and temperature-dependent material properties show that the accurate iso-error maps are obtained for both angular and radial errors. The accuracy achieved is because the predicted stress increment in a single step calculation follows the exact value closely not only at the end of the step but also through the whole path. Also, the comparison of the computational time for the new and other algorithms shows that the new one is very efficient.

• 대한조선학회논문집
• /
• 제30권1호
• /
• pp.145-156
• /
• 1993

대변형, 대회전, 대변형도 문제를 고려한 탄소성-손상 유한요소 정식화 과정을 연구함으로써 구조물의 모든 비선형 거동 및 손상을 합리적으로 예측할 수 있는 수치모형을 개발하였다. 재료의 소성 변형과정에서 발생되는 손상을 합리적으로 고려하기 위하여 연속체 손상역학의 접근방법을 이용하여 구성방정식을 정식화하였으며 Updated Lagrangian 정식화방법, 호장증분법 등의 비선형 강성방정식 해법을 적용하여 2차원 평면문제를 대상으로 하는 탄소성-손상 유한요소해석 프로그램을 구성하였다. 여러가지 예제 계산을 통하여 이 수치모형의 적용성 및 타당성을 검토한 결과 대변형 문제, 손상을 포함하는 재료 비선형문제 공히 합리적인 해석결과를 제시하고 있슴을 확인할 수 있었다.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.199-208
• /
• 1993

소성지수 등을 이용한 경험식 및 역해석기법을 이용하여 구한 각종 토질정수를 사용하여 탄성해석, 탄소성해석(Cam-clay model) 및 탄점소성해석(Sekuguchi-Ohta model)을 실시하고, 그 결과를 압밀실험 결과와 비교하여, 토질정수의 간접적 산정법 및 구성모델의 적합성에 대하여 고찰하여 다음과 같은 결과를 얻었다. 압밀실험결과에 가장 근접한 해석방법은 역해석결과를 이용한 탄성해석과 역해석에서 구한 투수계수를 이용한 탄소성해석이었으며, 압밀실험에서 구한 투수계수를 이용한 탄소성해석 및 탄점소성해석은 상재하중 $10t/m^2$ 이하에서는 압밀실험결과와 유사한 결과를 나타내었고, 역해석에서 구한 투수계수를 이용한 탄점소성해석이 가장 큰 차이를 나타내었다. 탄점소성해석결과와 압밀실험결과의 차이가 가장 큰 이유는 소성지수가 매우 작은 시료에는 탄점소성모델의 적용이 적합하지 않기 때문인 것으로 판단된다.

• 한국공간구조학회논문집
• /
• 제6권4호
• /
• pp.63-72
• /
• 2006

본 논문은 처짐각법을 사용하여 탄소성 좌굴 기본긱을 유도하고 이를 타당성을 검증하고 있다. 이와 함께 이 개념을 사용하여 구조해석 할 수 있는 탄소성좌굴해석 요소를 정식화하는 방법도 함께 설명하고 있다. 이 요소는 요소 양단에 탄소성 거동을 표현하는 스프링을, 요소 중앙부는 선형좌굴을 표현하는 스프링을 각각 설정하여 실제 부재의 탄소성 좌굴거동을 표현하도록 설계되어 있다. 또한 이 방법이 통상의 기하강성 매트릭스를 사용한 방법과 비교하여 어떠한 장점이 있는지를 분석하고 있다.

• 한국지반공학회지:지반
• /
• 제11권3호
• /
• pp.81-90
• /
• 1995

본문은 현재 제안되고 있는 Lade모델을 분석하여 같은 관점에서 Lade모델과는 다른 개선된 탄.소성 모델을 제안하고자 한 것이다. 이 제안모델의 소성포텐셜함수(gp)는 항복함수(fp)에 다른 응력불변량(I1)을 부가시킨 형태로 제안하였으며, 이를 교정함수(Correction Function)라고 정의하여 전단항복면을 결정할 때 소성포텐셜함수가 독립적으로 기능하여 구성식의 확장이나 변화에 대응 하도록 하였다. 본 연구는 일종의 해석적 연구이므로 그 결과는 기존의 연구이론과 비교되어야 하므로 Sacramento River Sand의 시험결과와 백마강모래의 시험결과의 매개변수를 이용하여 Lade모델과 제안모델의 결과를 상호비교 하여 검증을 시도 하였다. 결과적으로 본 제안모델은 더 정확한 응력-변형 관계의 예측이 가능한 구성식으로의 전개가 가능할 것으로 판단된다.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.158-164
• /
• 2000

In this study a computer program is developed for analyzing the elasto-plastic dynamic behaviors of the plate subjected to line-loading by a low-velocity impactor. The equilibrium equation associated with the Hertzian contact law is formulated to evaluate the transient dynamic behaviour of the impacted plate. Compared with an elastic analysis, the effects of material plasticity are presented. Consequently, in the case of elasto-plastic analysys, impulse decreases, displacements increase and contact time duration is longer than the elastic case for same finite element model. And the time variation of the impacting load is not significant due to the plasticity except at the beginning of impact duration, and the induced stresses of the plate are more realistic.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.91-99
• /
• 2003

The purpose of this study is to analyze the characteristics of the connector having an influence on the elasto-plastic buckling load of ball-jointed single layer latticed domes. As an analytic model, domes are composed of tubular member elements, balls and connectors. The joint system of members in single layer latticed domes has influence on the buckling load. Therefore, in this paper, the variation of the elasto-plastic buckling load by effects of the connectors characteristics is analyzed. The structural behavior of the connector is investigated by following points: (1) the length of rigid zone, (2) looseness of screw and (3) the diameter of connector. In addition, the elasto-plastic buckling analysis is carried out through the variation of the connectors section of yielding part, and then the buckling mode of the dome is examined. As a result, it is emphasized that the characteristics of the connector have significant effects on the buckling load of latticed domes.

• Geomechanics and Engineering
• /
• 제11권1호
• /
• pp.77-94
• /
• 2016

A forked tunnel, as a special complicated underground structure, is composed of big-arch tunnel, multi-arch tunnel, neighborhood tunnels and separate tunnels according to the different distances between two separate tunnels. Due to the complicated process of design and construction, surrounding jointed rock mass stability of the big-arch tunnel which belongs to the forked tunnel during excavation is a hot issue that needs special attentions. In this paper, an elasto-plastic damage constitutive model for jointed rock mass is proposed based on the coupling method considering elasto-plastic and damage theories, and the irreversible thermodynamics theory. Based on this elasto-plastic damage constitutive model, a three dimensional elasto-plastic damage finite element code (D-FEM) is implemented using Visual Fortran language, which can numerically simulate the whole excavation process of underground project and perform the structural stability of the surrounding rock mass. Comparing with a popular commercial computer code, three dimensional fast Lagrangian analysis of continua (FLAC3D), this D-FEM has advantages in terms of rapid computing process, element grouping function and providing more material models. After that, FLAC3D and D-FEM are simultaneously used to perform the structural stability analysis of the surrounding rock mass in the forked tunnel considering three different computing schemes. The final numerical results behave almost consistent using both FLAC3D and D-FEM. But from the point of numerically obtained damage softening areas, the numerical results obtained by D-FEM more closely approach the practical behaviors of in-situ surrounding rock mass.