• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.69-77
• /
• 1987

철근 콘크리트 구조물의 재료적 비선형 해석을 위해 유한요소법을 적용하였다. 2 축응력 상태에서의 콘크리트 거동은 인장균열과 균열사이의 인장증강효과(tension stiffening effect) 그리고 최대압축 강도를 넘어서의 변형연화(strain-softening) 효과를 고려하는 비선형 구성 방정식으로 나타냈다. 콘크리트를 직교성 (orthotropic) 재료로 가정함으로써 비선형 탄성체로 간주하고, 등가일축변형도 개념을 사용한 등가 일축 응력-변형도(equivalent uniaxial stress-strain) 관계식으로 모형화하고, 철근 보강재는 Bauschinger 효과를 갖는 탄소성 변형 경화재료(elasto-plastic strain-hardening material)로 모형화 했다. 평면 응력 상태에서 철근콘크리트 보의 모형화는 각 절점에 2 개의 자유도를 갖는 사각형요소로 모형화하여 적용 시쳤으며, 이로부터 구한 유한요소해석의 결과치를 실험결과치의 중앙처짐, 응력, 변형율 그리고 균열성장과정에 대하여 비교 검토 하였다.

• 해양환경안전학회지
• /
• 제21권5호
• /
• pp.543-551
• /
• 2015

본 논문에서는 교량, 선박 등에 사용하고 해양환경을 고려한 알루미늄 합금(A6082-T-6) 플레이트 거더의 물리적 관계를 살펴보고자 한다. 플레이트 거더는 제품수명주기에 이동하중, 적재하중 등 같은 패치로딩을 경험하게 된다. 이 하중을 받는 알루미늄합금 플레이트 거더의 최종강도에 대해 다수 수치모형을 적용하여 탄소성 대변형 시리즈 해석을 수행하고 회귀분석을 통해 예측식을 제안하였다. 예측식은 최종강도와 세장변수의 상관관계로 나타냈으며 세장변수가 낮을 경우(0-2.3) 약 9 % 정도 오차가 발생하며 높을 경우(2.3-4.0) 약 1-2 % 정도 오차가 발생하였다. 따라서 제안 예측식 적정성은 합리적으로 평가할 수 있는 것으로 확인되었다.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.447-455
• /
• 2006

순수변위 비선형 4절점 쉘요소의 정식화를 제안하여 철근 콘크리트, 강재및 복합재료등 범용 목적의 구조물의 해석에 적합하도록 하였다. 기하강성의 정식은 2차 운동역학적 관계를 이용하여 쉘이 중립면에서 정의되었고 이러한 기하강성은 면내응력, 휨 모멘트와 수직 전단력의 형태로 구성되어 두꺼운 판 및 쉘의 해석에 효과적이다. 가정된 자연 변형률 방법을 사용하여 전단잠김 문제를 제거한 복합 쉘 요소는 얇은 판및 쉘의 경우에도 정확한 해를 구할 수 있다. 콘크리트 경우 소성이론 및 탄소성 파괴역학에 근거한 비탄성 해석이 가능하며 강재경우 폰미스의 항복이론과 이바노브의 항복이론을 이용한 소성해석이 가능하다. 복합 재료의 수직전단 강성 행렬은 평형방정식으로부터 유도하여 구성하였다. 본 연구에서 제안한 쉘 요소는 해석 예제들이 참고문헌과 잘 일치하여 정확성이 입증되었으며 범용목적의 박판구조 해석에 적합한 것으로 사료 되었다.

• International Journal of Automotive Technology
• /
• 제1권1호
• /
• pp.35-41
• /
• 2000

The crashworthiness of vehicles with finite element methods depends on the geometry modeling and the material properties. The vehicle body structures are generally composed of various members such as frames, stamped panels and deep-drawn parts from sheet metals. In order to ensure the impact characteristics of auto-body structures, the dynamic behavior of sheet metals must be examined to provide the appropriate constitutive relation. In this paper, high strain-rate tensile tests have been carried out with a tension type split Hopkinson bar apparatus specially designed for sheet metals. Experimental results from both static and dynamic tests with the tension split Hopkinson bar apparatus are interpolated to construct the Johnson-Cook and a modified Johnson-Cook equation as the constitutive relation, that should be applied to simulation of the dynamic behavior of auto-body structures. Simulation of auto-body structures has been carried out with an elasto-plastic finite element method with explicit time integration. The stress integration scheme with the plastic predictor-elastic corrector method is adopted in order to accurately keep track of the stress-strain relation for the rate-dependent model accurately. The crashworthiness of the structure with quasi-static constitutive relation is compared to the one with the rate-dependent constitutive model. Numerical simulation has been carried out for frontal frames and a hood of an automobile. Deformed shapes and the Impact energy absorption of the structure are investigated with the variation of the strain rate.

• Steel and Composite Structures
• /
• 제26권5호
• /
• pp.583-594
• /
• 2018

Although a lot of experimental and analytical investigations have been carried out for steel bridge piers made of SS400 and SM490, the formulas available for SS400 and SM490 are not suitable for evaluating ultimate load and deformation capacities of steel bridge piers made of high strength steel (HSS) SM570. The effect of various parameters is investigated in this paper, including plate width-to-thickness ratio, column slenderness ratio and axial compression force ratio, on the ultimate load and deformation capacities of steel bridge box piers made of SM570 steel subjected to cyclic loading. The elasto-plastic behavior of the steel bridge piers under cyclic loads is simulated through plastic large deformation finite element analysis, in which a modified two-surface model (M2SM) including cyclic hardening is employed to trace the material nonlinearity. An extensive parametric study is conducted to study the influences of structural parameters on the ultimate load and deformation capacities. Based on these analytical investigations, new formulas for predicting ultimate load and deformation capacities of steel bridge piers made of SM570 are proposed. This study extends the ultimate load and deformation capacities evaluation of steel bridge piers from SS400, SM490 steels to SM570 steel, and provides some useful suggestions.

• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.17-32
• /
• 1994

역재하시에 나타나는 흙의 비등방거동을 모델하기 위하여, 본 연구에서는 일반 등방경화규칙에 근거한 비등방 경화이론을 개발하였다. 일반 등방규칙은 등방경화의 기준이 되는 중심응력텐서가 임의의 응력상태에서 존재할 수 있도록 허용하므로, 역재하과정에서 발생하는 소성변형을 예측할 수가 있다. 제안된 구성모델은 단순한 경화함수만을 이용하여 수식화되었고, 일반등방경 화규칙에 적용된 개념을 기존의 비등방경화규칙과 비교하여 서술하였다. 검증을 위하여, 배수 및 비배수조건, 과압밀상태, Ko 압밀등의 초기조건이 상이한 점토에 대하여 관측된 삼축압축시료의 거동을 예측하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.93-98
• /
• 1999

Generally, the - life of die is limited by fatigue fracture or dimensional inaccuracy originated from wear. In this paper, to predict the fatigue life of the dissimilar materials die, the stress and stxain histories of die can be predicted by the analysis of elasto-plastic finite element neth hod and the elastic analysis of die during the process analysis of workpiece. Using heat shrink fit analysis, initial stress of the k r t die is computed. Also, the stress-life curve of die material can be obtained through experiment. With the above two facts, we propose the analysis method of predicting fatigue life in die. In the proposed model, tlz analysis of elastic-plastic finite element method for material is carried out by using ABAQUS. Surface force resulted from the contacting border of the die and workpiece is tmnsformed into the nodal force of die to implement elastic analysis. Besides, the proposed analysis model of die is applied to the one material and the dissimilar materials extrusion die.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.254-258
• /
• 2008

Dimensional accuracy is very important quality in micro forged part, especially on forged part. Dimension of forged part is changed continuously during forging process. Loading, unloading and ejecting stage affects dimensional of the forged tool. The elasto-plastic material model for billet and elastic model for die were used to analyze these changes. At same time, the calculated results were compared and analyzed by the experiment on same conditions. From the experimental and analytical studies, we can calculated the amount of difference between die and forged part, that is 0.49% based on the die dimension. The dimensional change is smaller than that of general sized-forged part,0.6%.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.490-495
• /
• 2000

This paper presents the dynamic behavior of stay cable with Lead-Shear damper( LSD) near the support. This kind of research about the dynamic behavior of LSD is essential to design LSD in order to mitigate the ambient vibration of stay cable. The hysteresis curve of LSD was assumed to be perfect elasto-plastic behavior based on the real hysteretic behavior of such lead-based dampers. Mechanical model of LSD was equivalent Kelvin model and sag effect of stay cable was considered. Yielding force (also referred as size) of LSD was selected as a design parameter. Effects of tension of stay cable and installation point of LSD were studied. It was found that optimal size of LSD exists for each case of stay cable.

• Structural Engineering and Mechanics
• /
• 제22권3호
• /
• pp.311-330
• /
• 2006

Standard compression tests of steel fiber reinforced concrete (SFRC) cylinders are conducted to formulate compressive stress versus compressive strain relationship of SFRC. Axial pullout tests of SFRC specimens are also conducted to explore its tensile stress strain relationship. Cover concrete spalling and reinforcement buckling models developed originally for normal reinforced concrete are modified to extend their application to SFRC. Thus obtained monotonic material models of concrete and reinforcing bars in SFRC members are combined with unloading/reloading loops used in the cyclic models of concrete and reinforcing bars in normal reinforced concrete. The resulting path-dependent cyclic material models are then incorporated in a finite-element based fiber analysis program. The applicability of these models at member level is verified by simulating cyclic lateral loading tests of SFRC columns under constant axial compression. The analysis using the proposed SFRC models yield results that are much closer to the experimental results than the analytical results obtained using the normal reinforced concrete models are.