• 한국지진공학회논문집
• /
• 제11권3호
• /
• pp.53-62
• /
• 2007

이 연구에서는 작용하는 하중특성에 따라 적절한 감쇠력을 발휘할 수 있는 복합감쇠기(complex damper)를 제안하고 그 유용성을 장대교량의 지진응답해석을 통하여 검토하였다. 제안한 복합감쇠기는 두개 이상의 탄소성감쇠기(elasto-plastic damper)와 오일 감쇠기(oil damper)의 조합에 의하여 구성되며, 탄소성감쇠기의 변위의존적인 특성과 오일감쇠기의 속도의존적인 특성을 적절히 결합함으로서 효율적인 감쇠시스템의 구성이 가능하게 하였다. 중소형의 지진이나 작은 진폭의 진동에서는 오일감쇠기가 주로 진동을 흡수하며, 발생 빈도가 낮으나 규모가 큰 지진 등에 대해서는 탄소성 감쇠기가 진동에너지를 흡수한다. 이와 같이 복합감쇠기는 두 가지 종류의 감쇠기 역할을 잘 구분시켜 경제적이고 제진효율성이 뛰어난 설계를 가능하게 한다. 복합감쇠장치의 수학적 모델을 정립하였고, 수치모사를 통하여 응답특성과 효율성을 평가하였다. 수치모사 결과, 복합감쇠기는 단일의 수동형감쇠기를 이용하는 경우보다 뛰어난 감쇠효과를 더욱 경제적으로 구현할 수 있으며 내진성능을 크게 향상시킬 수 있는 것으로 나타났다.

• 소성∙가공
• /
• 제17권6호
• /
• pp.393-400
• /
• 2008

Springback is one of the most difficult phenomena to analyze and control in sheet forming. Most of traditional springback control methods rely on experiences of skilled workers in industrial fields. This study focuses on prediction and generation of optimum reconfigurable die surfaces to control shape errors originated by springback. For this purpose, a deformation transfer function(DTF) was combined with finite element analysis of the springback in the 2D sheet forming model of elastic-perfectly plastic materials under the condition without blank holder. The results showed shape errors within 1% of the objective shape, which were comparable with analytically predicted errors. In addition to this theoretical analysis, DTF method was also applied to 2D and 3D sheet forming experiments. The experimental results showed ${\pm}0.5$ mm and ${\pm}1.0$ mm shape error distribution respectively, demonstrating that reconfigurable die surfaces were predicted well by the DTF method. Irrespective of material properties and sheet thickness, the DTF method was applicable not only to FEM simulation but also to 2D and 3D elasto-reconfigurable die forming. Consequently, this study shows that springback can be controlled effectively in the elasto-RDF system by using the DTF method.

• 한국지반신소재학회논문집
• /
• 제7권3호
• /
• pp.31-40
• /
• 2008

탄소성구성방정식을 적용한 유한요소법을 이용하여 흙막이벽의 변형형상에 따른 배면지반의 변형거동을 예측하였다. 굴착배면 지반의 변형형상은 흙막이벽 부근에서는 흙막이벽 변형형상과 유사하게 나타나지만 흙막이벽으로부터 멀어질수록 켄틸레버 형상으로 변한다. 그리고 흙막이벽의 상부변형을 억제시키면 배면지반의 변형(침하량, 측방이동량)을 감소시킬 수 있다. 또한, 굴착에 따른 흙막이벽의 변형형상은 굴착배면지반의 소성파괴영역 및 안전율 저하영역에 영향을 미치는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제15권5호
• /
• pp.64-73
• /
• 1997

Deformations of structures due to welding appear much complicated and deformated modes are also complex. As parameters governing deformations are various and effect of parameters on deformations is not well known, precise prediction of deformation due to welding has been a difficult problem. Until now, many research papers as to welding deformation have been published, but the research results can explain only one aspect of welding deformation have been published, but the research results can explain only one aspect of welding deformation and are hard to be used in reasonable prediction of welding deformations in complicated structures. In this study, based on the accumulated results concerning to welding deformations, a practical method to predict complicated welding deformations of large structure is proposed. A simplified model to estimate residual plastic strains is suggested and main parameters affecting residual plastic strains are shown to be heat input and joint restaints. Inherent strain theory and experimental data are combined with the finite element method and welding deformations of large structures are calculated by elastic analysis. Comparison of calculated results with experimental data shows the accuracy and validity of the proposed method.

• 소성∙가공
• /
• 제33권1호
• /
• pp.18-35
• /
• 2024

In the present work, the evolution rules for the internal variables including continuum damage factors are obtained using the thermodynamic framework, which are in turn facilitated to derive the elastic-plastic constitutive relation for the particulate composites. Using the Mori-Tanaka scheme, the homogenization on state and internal variables such as back-stress and damage factors is carried out to procure the rate independent plasticity relations. Moreover, the degradation of mechanical properties of constituents is depicted by the distinctive damages such that the phase and interfacial damages are treated individually accordingly, whereas the kinematic hardening is depicted by combining the Armstrong-Frederick and Phillips' back-stress evolutions. On the other hand, the present constitutive relation for each phase is expressed in terms of the respective damage-free effective quantities, then, followed by transformation into the damage affected overall nominal relations using the aforementioned homogenization concentration factors. An emphasis is placed on the qualitative analyses for strain localization by observing the perturbation growth instead of the conventional bifurcation analyses. It turns out that the proposed constitutive model offers a wide range of strain localization behavior depending on the evolution of various internal variable descriptions.

• 한국가스학회지
• /
• 제20권5호
• /
• pp.82-88
• /
• 2016

산업의 발전을 위해 자원개발이 필수적인 현시대에 육상자원의 고갈로 인해 극한지에 관심이 몰리고 있다. 그러나 극한지 자원개발을 위해서는 극한지의 환경을 이해하고 이에 맞는 건설기술 확보가 우선되어야 한다. 극한지에서 자주 나타나는 외부환경 중 특히 융해침하는 자원을 이송하는데 필수적인 배관에 치명적인 영향을 준다. 따라서 배관이 융해침하에 의해 어떤 영향을 받는지 예측하고 분석하는 것이 중요하다. 본 연구에서는 융해침하 시 배관의 매설깊이에 따른 영향을 분석하기 위해 3차원 모델을 개발하여 유한요소해석을 진행하였다. 이러한 극한지의 환경과 배관해석을 참고하여 Elasto-plastic이 고려된 배관이 받는 응력 및 변위를 분석하고 경향성을 알아보았다.

• 한국항공우주학회지
• /
• 제35권7호
• /
• pp.601-611
• /
• 2007

기계적 체결로 조립된 대부분의 항공기 구조는 볼트나 리벳구멍 가장자리의 부재간 접촉면 또는 체결구멍 부위에서 프레팅 손상을 받게 된다. 이러한 프레팅 부분슬립 경계부위에는 높은 접촉응력이 유발되고 이로 인해 프레팅 피로균열이 조기에 발생되어 피로수명을 현저히 감소시키게 된다. 본 연구는 2024-T351 알루미늄 합금판에 대하여 서로 다른 프레팅 조건하에서 일련의 프레팅 피로실험을 수행하여 역학적 파라미터와 프레팅 접촉조건 변수들과의 정량적 연계성을 검토하였다. 그리고 역학적 파라미터를 기초로 하는 기존의 수명예측 모델의 유효성을 분석하고 수정 적용하였다. 또한 파라미터 변화에 따른 접촉면에서의 응력 및 변형률 변화 거동을 고찰하기 위하여 탄소성 유한요소해석을 통하여 접촉응력을 해석하고 프레팅접촉 파라미터들과 피로균열 발생수명 사이의 관계에 대해 고찰하였다.

• Computers and Concrete
• /
• 제12권2호
• /
• pp.211-228
• /
• 2013

The structure analyzed in this paper has particular building style and special structural system. It is a rigid-connected twin-tower skyscraper with asymmetrical distribution of stiffness and masses in two towers. Because of the different stiffness between the north and the south towers, the torsion seismic vibration is significant. In this paper, in order to study the seismic response of the structure under both frequent low-intensity earthquakes as well as rare earthquakes at the levels of intensity 7, the analysis model is built and analyzed with NosaCAD. NosaCAD is an nonlinear structure analysis software based on second-development of AutoCAD with ObjectARX. It has convenient modeling function, high computational efficiency and diversity post-processing functions. The deformations, forces and damages of the structure are investigated based on the analysis. According to the analysis, there is no damage on the structure under frequent earthquakes, and the structure has sufficient capacity and ductility to resist rare earthquakes. Therefore the structure can reach the goal of no damage under frequent earthquakes and no collapse under rare earthquakes. The deformation of the structure is below the limit in Chinese code. The time sequence and distribution of damages on tubes are reasonable, which can dissipate some dynamic energy. At last, according to forces, load-carrying capacity and damage of elements, there are some suggestions on increasing the reinforcement in the core tube at base and in stiffened stories.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.41-48
• /
• 1992

Various soil behaviors usually occurring in the geotechnical problems, such as, cutting and embankments, stability of slope, seepage, consolidations, shearing failures and liquefaction, should be predicted and analyzed in any way. An approach of these predictions may be followed by the development of the constitutive equations as first and subsequently solved by numerical methods. The purpose of this paper is develop the constitutive equation of sands uder monotonic or cyclic loadings. The constitutive equation which is based on elasto-plastic theory, modified anisotropic consolidated stress parameter by Sekiguchi et al and Pender's theory is derived. And the equation is included a new stress parameter, hardening function, Bauschinger's effects and Pender's theory. The model is later evaluated and confirmed the validity by the test data of Ottawa sand, Banwol sand Hongseong sand. The following conclustions may be drawn: 1. The consititutive equation which is based on elasto-plastic theory, modified anisotropic consolidated stress parpameter by Sekiguchi et al and Pender's theory is derived. The equation in included a new stress parameter, hardening function, Bauschinger's effect and Pender's theory. 2. For Ottawa sand, the result of the constitutive equation shows a better agreement than that of Oka et al. The result of axial strain agrees well with the tested data. However, the result of horizontal strain is little bit off for the cyclic loadings or large stress. It is thought that the deviation may be improved by considering Poisson's ratio and precise measurement of shear modulus. 3. Banwol sand is used for the strain and stress tests with different relative densitites and confining pressures. The predeicted result shows a good agreement with the tested data because the required material parameters were directly measurd and determined form this laboratory. 4. For Hongseong sand, the tests under same amplitude of cyclic deviatoric stress shows a similar result with the tested data in absolute strain. It shows the acute shape of turning point because the sine wave of input is used in the test but the serrated wave in prediction.

• 전산구조공학
• /
• 제10권4호
• /
• pp.217-228
• /
• 1997

p-version 유한요소법에 의한 고정밀해석은 응력특이가 발생하는 선형탄성 문제에 매우 적합한 방법으로 인식되고 있다. 해석 결과의 정확도, 모델링의 단순성, 입력자료에 대한 통용성 및 사용자와 CPU 시간의 절감 등 여러장점이 선형탄성 문제에 적용되어 우수성이 입증되었지만, 탄소성 해석분야는 아직 적용이 이루어지지 않고 있다. 그러므로 본 논문에서는 일-경화재료에 대한 구성방정식을 이용하여 정식화된 증분소성이론과 소성유동법칙에 근거한 재료비선형 p-version 유한요소모델이 제안되었다. 비선형방정식을 풀기 위해 Newton-Raphson법과 초기강성도법 등의 반복법이 모색되었다. 제안된 모델을 이용하여 개구부를 가진 사각형 평판과 내압을 받는 두꺼운 실린더, 그리고 등분포하중을 받는 원판해석 등의 수치실험이 수행되었다. 한편, p-version 모델에 의한 해석결과는 문헌의 이론값과 상용유한요소프로그램인 ADINA의 해석결과와 비교 검증되었다.