• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.32-36
• /
• 2011

EG/AD/S type model ice was originally selected as the primary model ice material for the MOERI ice tank in Korea. The existence of a sugar component in the EG/AD/S mixture may cause a serious maintenance problem. In order to understand the influence of sugar in the original model ice, a series of tests with EG/AD/S and EG/AD model ices were performed, and their material properties compared. Because the target strength of model ice in the full-scale MOERI ice tank is expensive and difficult to control, tests were performed under cold room conditions using a miniature ice tank. This paper describes the material properties of EG/AD/S and EG/AD model ices, such as flexural strength, compressive strength and elastic modulus. In order to obtain the desired strength and stiffness levels for the model ice, a warm-up process was introduced.

• Coupled systems mechanics
• /
• 제5권3호
• /
• pp.223-234
• /
• 2016

The main purpose of current study is to find the soil effects on natural period of elevated tank. The coupled analytical method is used to assess in this study. The current study presented models which are capable to consider the soil dynamic stiffness changes and fluid- structure interaction effects on natural period of elevated tanks. The basic of mentioned models is extracted from elastic beam and lumped mass theory. The finite element is used to verify the results. It is observed that, external excitation can change the natural period of elevated tanks. Considering the increase of excitation frequency, the natural period will be decreased. The concluded values of natural period in case of soft and very soft soil are more affected from excitation frequency values. The high range of excitation frequency may reduce the natural period values. In addition it is observed that the excitation frequency has no significant effect on convective period compare with impulsive period.

• 한국가시화정보학회지
• /
• 제8권3호
• /
• pp.41-48
• /
• 2010

A visualization study to evaluate bubble motion in a tab water filled cylindrical tank with a varying flow rate of compressed air is conducted. The flow rate of compressed air varies from 1 to 5 L/min. Time resolved images are acquired by a high speed camera in 10 bit gray level at 100 fps and the measurement volume is irradiated by a 230 W halogen lamp. It is observed that there are three different regions; the bubble formation region, the rising bubble region and the free surface region. During the rise of bubble, the shape is changed as if an elastic body. Based on the binarized bubble image, the mean diameters of rising bubbles are estimated at beneath of the free surface. As the gas flow rate increases, the mean diameter is increased and the rising velocity also increases with buoyancy force.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.98-105
• /
• 2002

The effects of the base-isolation system and elastic soil foundation on the behavior of a liquid storage tank are studied. To evaluate the seismic response of liquid storage tank accurately, the coupled dynamic system considering base isolation and soil interaction problem is formulated in time domain. Results show that the base isolation system reduces effectively the radial displacements, base shears, overturning moments, axial resultant stresses and the hydrodynamic pressure by providing flexibility and energy dissipation capability. Base Isolation may, however, increase the relative liquid sloshing amplitude due to the effect of liquid-structure interaction and cause excessive large relative displacements between structure and foundation. In addition to base-isolator, the dynamic behavior of liquid storage tank is related to the flexibility of base foundation, so the analysis of soil-structure interaction s achieved.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.10-22
• /
• 1998

In the present work the elastic-plastic FE formulations using dynamic explicit time integration schemes are used for numerical analysis of a large auto-body panel stamping processes. For analyses of more complex cases with larger and more refined meshes, the explicit method is more time effective than implicit method, and has no convergency problem and has the robust nature of contact and friction algorithms while implicit method is widely used because of excellent accuracy and reliability. The elastic-plastic scheme is more reliable and rigorous while the rigid-plastic scheme require small computation time. In finite element simulation of auto-body panel stamping processes, the roobustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry conditions. The performnce of the dynamic explicit algorithms are investigated by comparing the simulation results of formaing of complicate shaped autobody parts, such as a fuel tank and a rear hinge, with the experimental results. It has been shown that the proposed dynamic explicit elastic-plastic finite element method enables an effective computation for complicated auto-body panel stamping processes.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1337-1347
• /
• 2013

원통형 GFRP 개인하수 처리시설의 극한거동에 대한 매개변수해석을 수행하였다. 지반을 비선형 스프링으로 대체한 해석모델과 3차원 고체요소를 적용한 두 가지 해석모델이 작성되었다. 보강링의 형태와 지반조건의 변화에 따른 개인하수처리시설의 극한거동이 분석되었다. Ramberg-Osgood 모델과 Druker-Prager 모델이 각각 GFRP 및 지반의 비선형성을 나타내기 위하여 적용되었다. 원통형 개인하수처리시설 내부에 설치된 강관 보강링의 직경과 두께 및 지반 탄성계수 및 내부마찰각 등을 매개변수로 하여 하중-변위 관계, 축방향 변형률 및 후프방향 변형률 등이 유한요소해석을 통하여 도출되었고 여러 매개변수들이 강관으로 보강된 개인하수처리시설의 극한강도에 미치는 영향들이 분석되었다.

• 한국해양공학회지
• /
• 제31권5호
• /
• pp.357-363
• /
• 2017

The sloshing pressure acting on a membrane-type LNG CCS is a typical irregular impact load, and the structural response of a tank system induced by sloshing also shows very complex behavior, including fluid structure interaction. Therefore, it is not easy to accurately estimate the sloshing impact pressures and resulting structural response. Moreover, a huge time consuming process to deal with the enormous pressure data obtained during a model tank test and the following structural analysis would be inevitable. To reduce the computation time for structural analysis, in this study, a rational structural modeling strategy was considered, and a simplified scheme to analyze the dynamic structural responses of an LNG CCS was introduced, which was based on the concept of the linear combination of the triangular response functions obtained by a transient response analysis of structures under unit triangular impact pressure. A structural analysis of a real Mark III membrane type insulation system under the sloshing impact pressure time histories obtained by model tests was performed using the various proposed structural models and simplified analysis scheme. The results were investigated in detail, including the elastic support effects of the hull structure.

• 대한수학회보
• /
• 제52권6호
• /
• pp.1973-2000
• /
• 2015

In this study, we present a multidimensional open system for valveless pumping (VP). This system consists of an elastic tube connected to two open tanks filled with a fluid under gravity. The two-dimensional elastic tube model is constructed based on the immersed boundary method, and the tank model is governed by a system of ordinary differential equations based on the work-energy principle. The flows into and out of the elastic tube are modeled in terms of the source/sink patches inside the tube. The fluid dynamics of this system is generated by the periodic compress-and-release action applied to an asymmetric region of the elastic tube. We have developed an algorithm to couple these partial differential equations and ordinary differential equations using the pressure-flow relationship and the linearity of the discretized Navier-Stokes equations. We have observed the most important feature of VP, namely, the existence of a unidirectional net flow in the system. Our computations are focused on the factors that strongly influence the occurrence of unidirectional flows, for example, the frequency, compression duration, and location of pumping. Based on these investigations, some case studies are performed to observe the details of the ow features.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.396-401
• /
• 2005

In this study, the assumed mode method using characteristic polynomials of Timoshenko beam is applied to the free vibration analysis for the stiffened plate of ship tank side in contact with water. The hydro-elastic effect of the fluid-structure interaction is considered by fluid velocity potential, derived from boundary conditions for fluid and structure, and utilized in the calculation of added mass matrix using assumed modes. To verify the validity and effectiveness of the presented method, free vibration analysis for the stiffened plates in contact with finite and infinite fluids have been carried out and its results were compared with those obtained by a general purpose FEA software.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.23-31
• /
• 2003

A novel 3D shape optimization algorithm is presented for electromagnetic devices carry-ing eddy current. The algorithm integrates the 3D finite element performance analysis and the steepest descent method with design sensitivity and mesh relocation method. For the design sensitivity formula, the adjoint variable vector is defined in complex form based on the 3D finite element method for eddy current problems. A new 3D mesh relocation method is also proposed using the deformation theory of the elastic body under stress to renew the mesh as the shape changes. The design sensitivity f3r the sur-face nodal points is also systematically converted into that for the design variables for the parameterized optimization application. The proposed algorithm is applied to the optimum design of the tank shield model of the transformer and the effectiveness is proved.