• 한국산학기술학회논문지
• /
• 제15권7호
• /
• pp.4093-4099
• /
• 2014

본 논문에서는 200 kW급 마이크로 가스 터빈 시스템의 연소기집합체의 열-구조 연성 해석을 수행하였다. 일반적인 연소기집합체는 라이너, 내외 케이스, 버너와 노즐링 등으로 구성되어 있으며, 본 연구에서 개발된 유한요소모델은 연소기집합체 내 다양한 부품들의 다른 열팽창을 보상하기 위해 부품간의 이격과 마찰 요소들이 존재하므로 비선형 간극 및 마찰 요소 등을 포함하고 있다. 본 연구를 통해 연소기집합체의 외부 경계지지조건이 높은 온도구배로 인한 응력 에 가장 큰 영향을 주는 인자라는 것을 밝혀냈으며, 과도한 응력이나 변형을 방지하기 위한 적절한 외부 경계지지조건을 찾기 위하여 외부 경계지역에 탄성 지지조건을 가상하여 적절한 경계조건을 도출하여 설계에 사용될 수 있도록 하였다.

• 한국전산구조공학회논문집
• /
• 제18권1호
• /
• pp.79-91
• /
• 2005

본 논문에서는 프리스트레스를 이용한 가시설 공법(IPS)에 적용되는 띠장의 거동의 해석 및 설계절차에 대한 연구를 수행하였다. 띠장에 초기장력이 도입되는 구조계는 탄성지반위에 놓인 보이론에 의하여 부재력이 산출되고, 토압에 의한 부재력은 장력을 부정정력으로 취하여 부정정 구조해석을 통하여 띠장의 축력 및 휨모멘트를 계산하였다. 지반은 압축력 전담요소, 케이블은 인장력 전담요소를 사용하여 등분포 토압 및 편토압을 받는 띠장의 전산해석을 수행하였다. 기존의 가시설 설계에 적용되는 토압을 적용하여 IPS 띠장설계를 실시하였고, 긴장력과 설계토압에 의한 축력과 휨모멘트를 계산하여 축응력과 휨응력을 도출하고 합성응력검토를 수행하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 추계학술대회
• /
• pp.163-164
• /
• 2013

양방향차도선(CAR-FERRY)은 육지와 도서, 도서와 도서 간을 연결하는 교통수단 기능과 지속적인 해양관광객의 수요증가에 따른 해양관광 연계 연안여객 운송수단 역할을 하고 있다. 이에 따른 양방향 차도선은 이용의 편리성이 증대 되고 접안으로 인한 해양 사고를 줄일 수 있다. 양방향차도선은 등흘수(even) 상태로 프로펠러가 양쪽에 있기 때문에 프로펠러가 소직경 저회전으로 인하여 전진 운항 시에 반력에 의한 축계 및 프로펠러 파손 등이 발생할 수 있다. 이에 따른 엔진 출력, 선형, 비틀림 진동 등에 따른 감속기, 탄성커플링 선정, 횡진동 및 축계정렬(Shaft alignment)을 고려한 축계설계(베어링 수량, 폭, 간격)를 하여 선체의 추진축 1차 지지부의 구조에 대한 건전성을 평가하였다.

• Structural Engineering and Mechanics
• /
• 제2권4호
• /
• pp.369-381
• /
• 1994

This paper is concerned with the elastic buckling of cylindrical shells with internal rigid ring supports. The internal supports impose a zero lateral deflection constraint on the buckling modes at their locations. An automated Rayleigh-Ritz method is presented for solving this buckling problem. The method can handle any combination of end conditions and any number of internal supports. Moreover, it is simple to code and can yield very accurate solutions. New buckling results for cylindrical shells with a single internal ring support, and under lateral pressure and hydrostatic pressure, are given in the form of design charts. These results should be valuable to engineering designers.

• Structural Engineering and Mechanics
• /
• 제24권4호
• /
• pp.493-508
• /
• 2006

Vibration mode localization and frequency loci veering in disordered coupled beam system are studied in this paper using finite element analysis. Two beams coupled with transverse and rotational springs are examined. Small disorders in the physical parameters such as Young's modulus, mass density or span length of the substructure are introduced in the investigation of the mode localization and frequency loci veering phenomena. The effect of disorder in the elastic support on the mode localization phenomenon is also discussed. It is found that an asymmetric disorder in the weakly coupled system will lead to the occurrence of mode localization and frequency loci phenomena.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.519-545
• /
• 2013

An outline of the Timoshenko beam theory is presented. Two differential equations of motion in terms of deflection and rotation are comprised into single equation with deflection and analytical solutions of natural vibrations for different boundary conditions are given. Double frequency phenomenon for simply supported beam is investigated. The Timoshenko beam theory is modified by decomposition of total deflection into pure bending deflection and shear deflection, and total rotation into bending rotation and axial shear angle. The governing equations are condensed into two independent equations of motion, one for flexural and another for axial shear vibrations. Flexural vibrations of a simply supported, clamped and free beam are analysed by both theories and the same natural frequencies are obtained. That fact is proved in an analytical way. Axial shear vibrations are analogous to stretching vibrations on an axial elastic support, resulting in an additional response spectrum, as a novelty. Relationship between parameters in beam response functions of all type of vibrations is analysed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.166-178
• /
• 1991

Using FLAC, which is an explicit finite difference code written for analysis of problems in geotechnical engineering, a particular example 2 in the Korean Geothechnical Society News has been analysed. The elastoplasticity formulation in FLAC assumes an elastic, perfectly plastic solid in plane strain which conforms to a Mohr-Coulomb yield condition. During tunnel excavations by stages, stresses and diaplacements in region around the tunnel varies according to distance from the face of tunnel and installation of tunnel supports, and soon. In this analysis, the three dimensional support effect of the rock mass during the process of excavation is simulated by using the stress distribution method, and varying the material constants of shotcrete in each stage also considered. The maximum convergency is occured at the crown of the tunnel and estimated to be about 12mm.

• 산업기술연구
• /
• 제17권
• /
• pp.205-211
• /
• 1997

The problem of deteriorated highway concrete slab is very serious all over the world. Before making any decision on repair work, reliable non-destructive evaluation is necessary. One of the dependable methods is to evaluate the in-situ stiffness of the slab by means of obtaining the natural frequency. By comparing the in-situ stiffness with the one obtained at the design stage, the degree of damage can be estimated rather accurately. In this paper, the numerical modeling of vibration analysis to three span continuous reinforced concrete bridge with elastic intermediate support is presented.

• Smart Structures and Systems
• /
• 제20권1호
• /
• pp.53-60
• /
• 2017

Reinforced concrete shear wall is one of the most common structural forms for high-rise buildings, and seismic energy dissipation techniques, which are effective means to control structural vibration response, are being increasingly used in engineering. Reinforced concrete-mild steel damper stiffness-tandem energy dissipation coupling beams are a new technology being gradually adopted by more construction projects since being proposed. Research on this technology is somewhat deficient, and this paper investigates design principles and methods for two types of mild steel dampers commonly used for energy dissipation coupling beams. Based on the conception design of R.C. shear wall structure and mechanics principle, the basic design theories and analytic expressions for the related optimization parameters of dampers at elastic stage, yield stage, and limit state are derived. The outcomes provide technical support and reference for application and promotion of reinforced concrete-mild steel damper stiffness-tandem energy dissipation coupling beam in engineering practice.

• Earthquakes and Structures
• /
• 제15권1호
• /
• pp.97-111
• /
• 2018

Buildings featuring a transfer structure can be commonly found in metropolitan cities situated in regions of lower seismicity. A transfer structure can be in the form of a rigid plate or an array of deep girders positioned at the podium level of the building to support the tower structure of the building. The anomalous increase in the shear force demand on the tower walls above the podium is a major cause for concern. Design guidance on how to quantify these adverse effects is not available. In this paper a simplified method for quantifying the increase in the shear force demand on the tower walls is presented. In view of the very limited ductile nature of this type of construction the analysis presented herein is based on linear elastic behaviour.