• 제목/요약/키워드: Elastic Support

검색결과 304건 처리시간 0.033초

Eigen analysis of functionally graded beams with variable cross-section resting on elastic supports and elastic foundation

  • Duy, Hien Ta;Van, Thuan Nguyen;Noh, Hyuk Chun
    • Structural Engineering and Mechanics
    • /
    • 제52권5호
    • /
    • pp.1033-1049
    • /
    • 2014
  • The free vibration of functionally graded material (FGM) beams on an elastic foundation and spring supports is investigated. Young's modulus, mass density and width of the beam are assumed to vary in thickness and axial directions respectively following the exponential law. The spring supports are also taken into account at both ends of the beam. An analytical formulation is suggested to obtain eigen solutions of the FGM beams. Numerical analyses, based on finite element method by using a beam finite element developed in this study, are performed in order to show the legitimacy of the analytical solutions. Some results for the natural frequencies of the FGM beams are given considering the effect of various structural parameters. It is also shown that the spring supports show the greatest effect on the natural frequencies of FGM beams.

변형률 및 지반강성을 고려한 평판재하시험과 흙강성측정기의 탄성계수 비교 (Comparison of Elastic Modulus Evaluated by Plate Load Test and Soil Stiffness Gauge Considering Strain and Ground Stiffness)

  • 김규선;신동현
    • 한국지반공학회논문집
    • /
    • 제38권10호
    • /
    • pp.31-40
    • /
    • 2022
  • 본 연구에서는 기초 지지층의 응력-침하특성을 평가하기 위해 변형률 범위가 다른 두 가지 강성측정 시험법으로 산정한 탄성계수를 비교하였다. 미소변형률 범위의 흙강성측정기(SSG)와 중변형률 범위의 평판재하시험(PLT)이 탄성계수 산정에 이용되었다. 변형률 범위가 다른 시험방법으로 구한 탄성계수를 기초설계 및 시공실무에 적용하기 위해서는 각각의 값에 대한 상관관계가 사전에 파악되어야 한다. 국내의 대표적인 지지층인 풍화토 및 풍화암에서 두 가지 방법에 의한 탄성계수를 비교·분석한 결과에 따르면, 지반의 종류 및 응력조건에 따라 탄성계수가 상이하게 평가되는 것으로 나타났다. 다양한 조건의 지반에 대해 평판재하시험으로 산정한 정적 탄성계수는 흙강성측정기로 측정한 동적 탄성계수와 비교할 때, 시험의 변형률 수준 차이로 인해 56% 감소된 결과를 나타냈다. 따라서, 평판재하 시험을 대체하여 흙강성측정기를 효과적으로 사용하기 위해서는 지반강성에 따른 응력분포, 응력수준, 동적효과에 대한 영향을 보정하여 측정값을 적용할 필요가 있다.

Application of artificial neural networks to a double receding contact problem with a rigid stamp

  • Cakiroglu, Erdogan;Comez, Isa;Erdol, Ragip
    • Structural Engineering and Mechanics
    • /
    • 제21권2호
    • /
    • pp.205-220
    • /
    • 2005
  • This paper presents the possibilities of adapting artificial neural networks (ANNs) to predict the dimensionless parameters related to the maximum contact pressures of an elasticity problem. The plane symmetric double receding contact problem for a rigid stamp and two elastic strips having different elastic constants and heights is considered. The external load is applied to the upper elastic strip by means of a rigid stamp and the lower elastic strip is bonded to a rigid support. The problem is solved under the assumptions that the contact between two elastic strips also between the rigid stamp and the upper elastic strip are frictionless, the effect of gravity force is neglected and only compressive normal tractions can be transmitted through the interfaces. A three layered ANN with backpropagation (BP) algorithm is utilized for prediction of the dimensionless parameters related to the maximum contact pressures. Training and testing patterns are formed by using the theory of elasticity with integral transformation technique. ANN predictions and theoretical solutions are compared and seen that ANN predictions are quite close to the theoretical solutions. It is demonstrated that ANNs is a suitable numerical tool and if properly used, can reduce time consumed.

치주적 손상을 유발하는 latex-elastic ring의 부적절한 사용에대한 증례보고 (A CASE REPORT ON INADEQUATE USE OF LATEX-ELASTIC RING INDUCING PERIODONTAL DAMAGE)

  • 최병재;최원경;이제호;손흥규
    • 대한소아치과학회지
    • /
    • 제24권3호
    • /
    • pp.597-601
    • /
    • 1997
  • This paper presents improper use of latex-elastic ring in movement of teeth and its consequence. Simple orthodontic movement of teeth including closure of diastema may be achieved by the use of simple method with fixed or removable appliance associated with latex-elastic ring. But, if it is used alone, it acts as a local irritant and then produces localized periodontitis. In case of localized periodontitis resulting from latex-elastic ring, diagnosis is difficult because the patient is usually unaware of the presence of the rings on the roots of the involved teeth and because the ring is not probed and is radiolucent and therefore not discernible radiographically and clinically. Occasionally, surgery is requred for the detection. This case emphasizes the necessity that the use of latex-elastic ring in closing diastema should be accompanied with removable or fixed appliance as well as close professional supervision. Its use without adequate provision for stabilization or retention on the crowns of teeth results in destruction of periodontal support and the teeth may be lost.

  • PDF

The modal characteristics of non-uniform multi-span continuous beam bridges

  • Shi, Lu-Ning;Yan, Wei-Ming;He, Hao-Xiang
    • Structural Engineering and Mechanics
    • /
    • 제52권5호
    • /
    • pp.997-1017
    • /
    • 2014
  • According to the structure characteristics of the non-uniform beam bridge, a practical model for calculating the vibration equation of the non-uniform beam bridge is given and the application scope of the model includes not only the beam bridge structure but also the non-uniform beam with added masses and elastic supports. Based on the Bernoulli-Euler beam theory, extending the application of the modal perturbation method and establishment of a semi-analytical method for solving the vibration equation of the non-uniform beam with added masses and elastic supports based is able to be made. In the modal subspace of the uniform beam with the elastic supports, the variable coefficient differential equation that describes the dynamic behavior of the non-uniform beam is converted to nonlinear algebraic equations. Extending the application of the modal perturbation method is suitable for solving the vibration equation of the simply supported and continuous non-uniform beam with its arbitrary added masses and elastic supports. The examples, that are analyzed, demonstrate the high precision and fast convergence speed of the method. Further study of the timesaving method for the dynamic characteristics of symmetrical beam and the symmetry of mode shape should be developed. Eventually, the effects of elastic supports and added masses on dynamic characteristics of the three-span non-uniform beam bridge are reported.

선박용 디젤발전기의 진동 절연을 위한 설계 기준 (A Design Criterion for the Vibration of a Marine Diesel Generator Set)

  • 이돈출
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.648-655
    • /
    • 2005
  • The resilient mounts of a diesel engine installed onboard a ship should be designed for both static and dynamic loads. If possible, the resonance frequencies of the six rigid body modes of the installation and the flexible modes of the engine support structure should not lie within the engine operation range. In this paper a design criterion is proposed to evaluate an isolation system which involves the summation of dynamic forces transmitted through the resilient mounts and elastic potential energy index stored in the mounts. A case study is also presented in which a diesel engine generator, which had an elastic foundation and was mounted in a 5500 TEU container vessel, was studied both theoretically and experimentally. The theoretical analysis of the test model was performed by using a single mass 6 degree of freedom system. Actual measurements of mechanical vibration of the Engine and its foundation onboard were carried out, which showed the importance of including the flexibility of the engine support structure in the mode

  • PDF

집중질량 변화에 따른 수중 고속 운동체의 구조 안정성 해석 (Structual Stability Analysis According to the Lumped Mass of High Speed Vehicles in Underwater)

  • 오경원;서주노;조병구;류시웅;공창덕
    • 한국해양공학회지
    • /
    • 제23권1호
    • /
    • pp.54-59
    • /
    • 2009
  • In this paper, the effect of the position and size of a lumped mass on the structural stability of a high speed underwater vehicle is presented. For simplicity, a real vehicle was modeled as a follower force subjected beam that was resting on an elastic foundation, and the lumped mass effect was simplified as an elastic intermediate support. The stability of the simplified model was numerically analyzed based on the Finite element method (FEM). This numerical simulation revealed that flutter type instability or divergence type instability occurs, depending on the position and stiffness of the elastic intermediate support, which implies that the instability of the real model is affected by the position and size of the lumped mass.

탄성지지된 3경간 철근콘크리트 교량의 간단한 진동해석법 (Simple Method of Vibration Analysis of Three Span Continuous Reinforced Concrete Bridge with Elastic Intermediate Support)

  • Kim, Duk-Hyun;Han, Bong-Koo
    • Composites Research
    • /
    • 제17권3호
    • /
    • pp.23-28
    • /
    • 2004
  • 불균등 단면이나 임의의 경계조건을 가진 보나 탑 구조물의 고유진동수를 계산하는 방법은 김덕현에 의해 1960년 후반기에 개발 응용되고 1974년의 한 국제회의에서 발표되었다. 이 논문에는 이 방법을 탄성지지된 3경간연속 철근콘크리트 교량에 적용한 결과가 실려있다. 콘크리트 상판은 특별직교 이방성 판으로 취급되었다. 이 진동해석에 필요한 변위의 영향계수는 여러 방법으로 구할 수 있으나 이 논문에서는 유한차분법이 사용되었다. 기초의 탄성계수와, $D_{22}$, $D_{12}$, $D_{66}$ 강성의 고유진동수에 대한 영향이 철저하게 연구되었다.

선박용 디젤발전기의 진동 절연을 위한 설계 기준 (A Design Criterion for the Vibration Isolation of a Marine Diesel Generator Set)

  • ;;이돈출
    • 한국소음진동공학회논문집
    • /
    • 제16권4호
    • /
    • pp.329-338
    • /
    • 2006
  • The resilient mounts of a diesel engine installed onboard a ship should be designed for both static and dynamic loads. If possible, the resonance frequencies of the six rigid body modes of the installation and the flexible modes of the engine support structure should not lie within the engine operation range. In this paper a design criterion is proposed to evaluate an isolation system which involves the summation of dynamic forces transmitted through the resilient mounts and elastic potential energy index stored in the mounts. A case study is also presented in which a diesel engine generator, which had an elastic foundation and was mounted in a 5500 TEU container vessel, was studied both theoretically and experimentally. The theoretical analysis of the test model was performed by using a single mass 6 degree of freedom system. Actual measurements of mechanical vibration of the engine and its foundation onboard were carried out, which showed the importance of including the flexibility of the engine support structure in the mode.

탄성 변형된 저어널의 편심과 베어링 부시의 부분경사를 고려한 선미관 후부 베어링의 압력분포 해석 (Pressure Analysis of Sterntube after Bush Bearing Considering Elastic Deflection of Misaligned Journal and Partial Slope of Bearing Bush)

  • 정준모;최익흥
    • 대한조선학회논문집
    • /
    • 제44권6호
    • /
    • pp.666-674
    • /
    • 2007
  • It is very important to estimate static squeezing pressure distributions for lining material of sterntube after bearing at dry dock stage since the maximum squeezing pressure value can be one of the significant characteristics representing coming navigation performances of the propulsion system. Moderate oil film pressure between lining material and propulsion shaft is also essential for safe ship service. In this paper, Hertz contact theory is explained to derive static squeezing pressure. Reynolds equation simplified from Navier-Stokes equation is centrally differentiated to numerically obtain dynamic oil film pressures. New shaft alignment technology of nonlinear elastic multi-support bearing elements is also used in order to obtain external forces acting on lining material of bearing. For 300K DWT class VLCC with synthetic bush of sterntube after bearing, static squeezing pressures are calculated using derived external forces and Hertz contact theory. Optimum partial slope of the after bush is presented by parametric shaft alignment analyses. Dynamic oil film pressures are comparatively evaluated for partially bored and unbored after bush. Finally it is proved that the partial slope can drastically reduce oil film pressure during engine running.