• Journal of Information Processing Systems
• /
• 제18권4호
• /
• pp.457-469
• /
• 2022

Hydraulic concrete buildings in the northwest of China are often subject to the combined effects of low-temperature frost damage, during drying and wetting cycles, and salt erosion, so the study of concrete deterioration prediction is of major importance. The prediction model of the relative dynamic elastic modulus (RDEM) of four different kinds of modified concrete under the special environment in the northwest of China was established using Grey residual Markov theory. Based on the available test data, modified values of the dynamic elastic modulus were obtained based on the Grey GM(1,1) model and the residual GM(1,1) model, combined with the Markov sign correction, and the dynamic elastic modulus of concrete was predicted. The computational analysis showed that the maximum relative error of the corrected dynamic elastic modulus was significantly reduced, from 1.599% to 0.270% for the BS2 group. The analysis error showed that the model was more adjusted to the concrete mixed with fly ash and mineral powder, and its calculation error was significantly lower than that of the rest of the groups. The analysis of the data for each group proved that the model could predict the loss of dynamic elastic modulus of the deterioration of the concrete effectively, as well as the number of cycles when the concrete reached the damaged state.

• 콘크리트학회논문집
• /
• 제12권2호
• /
• pp.13-20
• /
• 2000

In this study, the compression test of steel fiber reinforced high-strength concrete have been performed with varying strengths and volume factions of steel fiber. Three types of matrices including low strength concrete( c'=30 MPa), medium strength concrete( c'=50 MPa), and high strength concrete( c'=70 MPa) were selected. Five types of fiber fractions were studied including 0.0%, 0.5%, 0.75%, 1.0%, and 1.5% by volume. From the results of the compressive strength test, the post-peak characteristics of the stress-strain relationship were investigated, and the existing equations to predict the elastic modulus were experimentally evaluated.

• 한국지반공학회논문집
• /
• 제25권8호
• /
• pp.65-76
• /
• 2009

본 연구는 Brazilian 시험결과를 매개로 일축압축강도와 탄성계수를 추정할 수 있는 경험식을 화성암의 대부분을 구성하는 화강암, 안산암 및 유문암을 대상으로 도출하였다. 기존 간편식(점하중 강도지수, Schmidt hammer 타격법)으로 도출된 결과와 비교, 검정을 하여 좋은 상관성과 신뢰성을 확인하였기에 Brazilian 시험은 일축압축강도와 탄성계수를 추정할수 있는 또 하나의 간접방법으로 사료된다. 특히 지질 조사시 얻은 제한된 코어로 인하여 직접시험이 어려운 경우에도 본 연구에서 제시하는 방법이 효율성이 있을 것으로 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.166-173
• /
• 2000

This paper describes the method of evaluating the elastic modulus of soil medium by using the Retangular Plate Loading Test. The foundaton is considered to be the elastic half-space. The stiffness matrix of elastic half space is drived using Boussinesq's analytical soulution. A numerical examples are presented to verify the validity of this procedure. Also, the numerical results are compared with those of the existing study results. The procedure proposed in this theses can be applied to the design of concrete paving resting on the elastic foundation

• Advances in concrete construction
• /
• 제13권3호
• /
• pp.215-221
• /
• 2022

Considering their similar mass densities, an attempt was made to optimize the mix design of micro-concrete that used barite sand as an aggregate by substituting marble powder (5%, 10%, 20%, 30%, 40%, 50%, 70%), clay brick powder (30%, 50%, 70%), and fly ash (30%, 50%, 70%) for the concrete (by mass) to form specimens for shaking table tests. The test results showed that for these three groups of materials, the substitutions had little effect on the density. The barite sand played a decisive role in the density, and the overall density of the specimens reached approximately 2.9 g/cm³. The compressive strength and elastic modulus decreased with an increase in the substitution rates for the three types of materials. Among them, the 28 day compressive strength values of the 40% and 50% marble powder groups were 11.73 MPa and 8.33 MPa, respectively, which were 58.7% and 70.7% lower than the control group, respectively. Their elastic modulus values were 1.33×10⁴ MPa and 1.42×10⁴ MPa, respectively, which were 39.1% and 35% lower than those of the control group, respectively. The 28 day compressive strength values of the 50% and 70% clay brick powder groups were 13.13 MPa and 5.8 MPa, respectively, which were 53.8% and 79.6% lower than the control group, respectively. Their elastic modulus values were 1.54×10⁴ MPa and 1.19×10⁴ MPa, respectively, which were 29.7% and 45.4% lower than those of the control group, respectively. The 28 day compressive strength values of the 50% and 70% fly ash groups were 13.5 MPa and 7.1 MPa, respectively, which were 52.5% and 75% lower than those of the control group, respectively. Their elastic modulus values were 1.36×10⁴ MPa and 0.95×10⁴ MPa, respectively, which were 37.9% and 56.6% lower than those of the control group, respectively. There was a linear relationship between the 28 day compressive strength and elastic modulus, with the correlation coefficient reaching a value higher than 0.88. The test results showed that the model materials met the high density, low compressive strength, and low elastic modulus requirements for shaking table tests, and the test data of the three groups of different alternative materials were compared and analyzed to provide references and assistance for relevant model testers.

• 한국해안·해양공학회논문집
• /
• 제21권6호
• /
• pp.437-443
• /
• 2009

콘크리트 구조물의 안전성이나 내구성을 파악하기 위해 비파과 검사를 실시하는데, 충격공진법을 이용하면 동탄성계수를 얻을 수 있다. 동탄성계수는 일축압축실험에서 얻을 수 있는 일반적인 정탄성계수와는 절대값에서 차이가 있다. 본 연구에서는 현장 항만 콘크리트 구조물에서 채취된 코어시료에 대한 실내실험을 통해 동탄성계수와 정탄성계수의 상관관계를 규명하고자 하였다. 현장 항만 콘크리트 코어는 완도항, 마산항, 인천항에서 채취하였으며, 노출환경에 따라 대기부, 비말대, 간만대로 나누어 작업을 실시하였다. 채취된 시료는 실험실로 이송하여 충격공진법과 일축압축실험을 실시하였다. 충격공진법을 이용하면 개별시료의 공진주파수를 측정할 수 있으며, 이를 바탕으로 동탄성계수를 계산할 수 있다. 일축압축실험을 수행하면 시료의 응력-변형률 곡선을 얻을 수 있는데, 이를 바탕으로 일반적으로 설계에 사용되는 정탄성계수(현탄성계수)와 낮은 응력수준의 초기현탄성계수를 구하였다. 동탄성계수와 정탄성계수 및 초기현탄성계수의 상관관계는 채취 지역에 따라 차이가 있었지만 같은 안벽 내에서의 노출 환경에 따라서는 거의 차이가 없었다. 또한, 압축강도와 동탄성계수의 상관관계도 코어채취지역에 따라 조금씩 차이가 있었다. 그러나, 압축강도와 정탄성계수는 코어채취지역에 따라 차이가 발생하지 않았다.

• 지질공학
• /
• 제29권3호
• /
• pp.339-349
• /
• 2019

국내 40개 구조물 설계 시 수행된 1,646개의 실내 및 현장시험 결과를 활용하여 국내 암종에 따른 동탄성계수의 분포특성을 파악하기 위하여 암종별 P파 속도, 정탄성계수, 동탄성계수 간의 상관식을 도출하고 기존 연구사례와 비교하여 검증하였다. P파 속도와 정탄성계수의 관계를 살펴보면 편마암에서는 선형, 화강암과 사암에서는 지수 함수의 관계를 보인다. 결정계수($R^2$)는 0.491~0.642로 높지 않지만, 결정계수를 0.836~0.990로 제시하고 있는 기존의 연구사례와 유사한 분포범위를 보인다. 정탄성계수와 동탄성계수의 상관식은 모든 암종에서 선형적인 관계를 보이며, 결정계수는 0.543~0.676이다. P파 속도와 동탄성계수의 상관식은 지수함수의 관계를 보이며, 결정계수는 0.875~0.940으로 높게 나타난다.

• 한국농공학회논문집
• /
• 제52권3호
• /
• pp.73-79
• /
• 2010

In the present study, the loading frequency dependencies of cyclic shear strength and elastic shear modulus of reconstituted clay were examined by performing undrained cyclic triaxial tests and undrained cyclic triaxial tests to determine deformation properties. The result of undrained cyclic triaxial test of reconstituted and saturated clay shows that a faster frequency leads to higher stress amplitude ratio, but when the frequency becomes fast up to a certain point, the stress amplitude ratio will reach its maximum limit and the frequency dependence becomes insignificant. And also, the result of undrained cyclic triaxial deformation test shows a fact that a faster loading frequency leads to higher equivalent shear modules and smaller hysteresis damping ratio, and confirms the frequency dependence of cohesive soil. Meanwhile, the result of the creep test shows that continuing creep is created in the undrained cyclic triaxial test with slow loading frequency rate, and since loading rate becomes slower at the vicinity of the maximum and the minimum deviator stress due to sine wave loading, the vicinity of the maximum and the minimum deviator stress shall be more influenced by creep.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.309-324
• /
• 2022

The post-fire elastic stiffness and performance of concrete-filled steel tube (CFST) columns containing recycled aggregate concrete (RAC) has rarely been addressed, particularly in terms of material properties. This study was conducted with the aim of assessing the modulus of elasticity of recycled aggregate concrete-filled steel tube (RACFST) stub columns following thermal loading. The test data were employed to model and assess the elastic modulus of circular RACFST stub columns subjected to axial loading after exposure to elevated temperatures. The length/diameter ratio of the specimens was less than three to prevent the sensitivity of overall buckling for the stub columns. The gene expression programming (GEP) method was employed for the model development. The GEP model was derived based on a comprehensive experimental database of heated and non-heated RACFST stub columns that have been properly gathered from the open literature. In this study, by using specifications of 149 specimens, the variables were the steel section ratio, applied temperature, yielding strength of steel, compressive strength of plain concrete, and elastic modulus of steel tube and concrete core (RAC). Moreover, parametric and sensitivity analyses were also performed to determine the contribution of different effective parameters to the post-fire elastic modulus. Additionally, comparisons and verification of the effectiveness of the proposed model were made between the values obtained from the GEP model and the formulas proposed by different researchers. Through the analyses and comparisons of the developed model against formulas available in the literature, the acceptable accuracy of the model for predicting the post-fire modulus of elasticity of circular RACFST stub columns was seen.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.1022-1031
• /
• 2001

The elastic modulus and fatigue properties of canine and human trabecular bone tissues (single trabecular) were experimentally determined on a microstructural level using four-point bending cyclic test, and they were compared based on microstructural characteristics and mineral density. The results showed that canine trabecular bone tissue had significantly lower modulus and lower fatigue strength than human tissue. The observed microstructural differences between the two tissues may be more responsible for the differences, although the lower mineral density in canine tissue might also have contributed to the lower modulus and fatigue strength.