• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.111-116
• /
• 2000

A semi-infinite interfacial crack propagated with constant velocity in two bonded anisotropic strip under out-of-plane clamped displacements is analyzed. The asymptotic stress and displacement fields near the crack tip are obtained, where the results get more general expressions applicable not only to isotropic/orthotropic materials but also to the extent of the anisotropic material having one plane of elastic symmetry for the interfacial crack. The dynamic stress intensity factor is obtained as a closed form, which is decreased as the velocity of crack propagation increases. The critical velocity where the stress intensity factor comes to zero is obtained, which agrees with the lower value between the critical values of parallel crack merged in the material 1 and 2 adjacent to the interface. The dynamic energy release rate is also obtained as a form related to the stress intensity factor.

• Tribology and Lubricants
• /
• 제16권5호
• /
• pp.373-380
• /
• 2000

Finite element analysis is performed on the subsurface crack propagation in brittle materials due to sliding contact. The sliding contact is simulated by a rigid asperity moving across the surface of an elastic half-surface containing single and multiple cracks. The single crack, coplanar cracks and parallel cracks are modeled to investigate the interaction effects on the crack growth in contact fatigue. The crack location is fixed and the friction coefficients between asperity and half-space are varied to analyze the effect of surface friction on stress intensity factor for horizontal cracks. The crack propagation direction is predicted based on the maximum range of shear and tensile stress intensity factors. With a coplanar crack, the stress intensity factor was increased. However, with a parallel crack, the stress intensity factor was decreased. These results indicate that the interaction of a coplanar crack increases fatigue crack propagation, whereas that of a parallel crack decreases it.

• Coupled systems mechanics
• /
• 제5권3호
• /
• pp.269-283
• /
• 2016

A two new high-order shear deformation theory for bending analysis is presented for a simply supported, functionally graded plate with porosities resting on an elastic foundation. This porosities may possibly occur inside the functionally graded materials (FGMs) during their fabrication, while material properties varying to a simple power-law distribution along the thickness direction. Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theories presented are variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. It is established that the volume fraction of porosity significantly affect the mechanical behavior of thick function ally graded plates. The validity of the two new theories is shown by comparing the present results with other higher-order theories. The influence of material parameter, the volume fraction of porosity and the thickness ratio on the behavior mechanical P-FGM plate are represented by numerical examples.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.144-155
• /
• 2000

초록 The validity, of a single parameter such as stress intensity, factor K or J-integral in traditional fracture mechanics depends strongly on the geometry, and loading condition. Therefore the second parameter like T-stress measuring the stress constraint is additionally needed to characterize the general crack-tip fields. While many, research works have been done to verify, the J-T description of elastic-plastic crack-tip stress fields in plane strain specimens, limited works (especially. for bimaterials) have been performed to describe the structural surface crack-front stress fields with the two parameters. On this background, via detailed three dimensional finite element analyses for surface-cracked plates and straight pipes of homogeneous materials and bimaterials under various loadings, we investigate the extended validity or limitation of the two parameter approach. We here first develop a full 3D mesh generating program for semi-elliptical surface cracks, and calculate elastic T-stress from the obtained finite element stress field. Comparing the J-T predictions to the elastic-plastic stresses from 3D finite element analyses. we then confirm the extended validity of fracture mechanics methodology based on the J-T two parameters in characterizing the surface crack-front fields of welded plates and pipes under various loadings.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.111-120
• /
• 2017

This study aimed to design the accelerated life testing (ALT) of concrete, which stimulating the special natural environment maximumly. Its evaluation indexes, such as dynamic elastic modulus, mass and ultrasonic velocity were measured, and the variation of relative mass and relative dynamic elastic modulus of concrete were studied. Meanwhile, the microanalysis method was used. Moreover, an exploratory application of the stochastic approach, the Weibull distribution and the lognormal distribution, were made to assess the durability of concrete structures. The results show that the ALT for simulating natural environment is more close to the service process of concrete structure under actual conditions; The relative dynamic elastic modulus can be used as the dominant durability evaluation parameters, because it is more sensitive to the environmental factors compared with the relative quality evaluation parameters; In the course of the concrete deterioration, the destruction of the salt freezing cycle is the dominant factor, supplemented by other factors; Both of those two stochastic approaches can be used to evaluate the reliability of concrete specimens under the condition of ALT; By comparison, The lognormal distribution method is better to describe the reliability process.

• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.121-132
• /
• 2018

This research investigates the free vibration analysis of advanced composite plates such as functionally graded plates (FGPs) resting on a two-parameter elastic foundations using a hybrid quasi-3D (trigonometric as well as polynomial) higher-order shear deformation theory (HSDT). This present theory, which does not require shear correction factor, accounts for shear deformation and thickness stretching effects by a sinusoidal and parabolic variation of all displacements across the thickness. Governing equations of motion for FGM plates are derived from Hamilton's principle. The closed form solutions are obtained by using Navier technique, and natural frequencies are found, for simply supported plates, by solving the results of eigenvalue problems. The accuracy of the present method is verified by comparing the obtained results with First-order shear deformation theory, and other predicted by quasi-3D higher-order shear deformation theories. It can be concluded that the proposed theory is efficient and simple in predicting the natural frequencies of functionally graded plates on elastic foundations.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.771-781
• /
• 2018

This study deals with free vibrations analysis with stretching effect of nanocomposite beams reinforced by single-walled carbon nanotubes (SWCNTs) resting on an elastic foundation. Four different carbon nanotubes (CNTs) distributions including uniform and three types of functionally graded distributions of CNTs through the thickness are considered. The rule of mixture is used to describe the effective material properties of the nanocomposite beams. The significant feature of this model is that, in addition to including the shear deformation effect and stretching effect it deals with only 4 unknowns without including a shear correction factor. The governing equations are derived through using Hamilton's principle. Natural frequencies are obtained for nanocomposite beams. The mathematical models provided in this paper are numerically validated by comparison with some available results. New results of free vibration analyses of CNTRC beams based on the present theory with stretching effect is presented and discussed in details. The effects of different parameters of the beam on the vibration responses of CNTRC beam are discussed.

• 한국강구조학회 논문집
• /
• 제13권2호
• /
• pp.133-141
• /
• 2001

축방향으로 가셋트판이 관통한 원형 강관 부재는 압축력을 전달하는 강관 트러스 구조물의 사재로 많이 사용된다. 본 연구의 대상이 되는 가셋트판이 관통한 원형 강관 부재는 단면 성능이 다른 두 부재로 이루어져 있으므로 탄성 좌굴내력은 강성비($\beta$)와 각 부재 길이의 비(G)에 의해 영향을 받게 된다. 그러나 현행 규준에서는 이러한 변수들에 대한 구체적인 연구 자료 없이 유효좌굴길이계수 k=0.9를 사재에 적용하여 설계하도록 하고 있다. 따라서 본 연구에서는 탄성론에 근거한 이론적 분석과 유한요소 해석에 의한 분석을 수행하여 각 변수들에 의한 구속효과를 파악하였다.

• 한국의류산업학회지
• /
• 제8권6호
• /
• pp.618-626
• /
• 2006

This research explored the actual conditions, problems and design preferences of dementia inpatient clothing. Data were collected by surveying 21 dementia hospitals and nursing care facilities and 87 caregivers and nurses of dementia hospitals. The collected data were analysed through frequency analysis, descriptive analysis and factor analysis. The results were as follows, First, the inpatient clothes of dementia hospitals were two-piece styles, the shirts of front opening with buttons and pants of no opening with elastic band. Those of dementia care facilities were two piece styles of shirts and pants, training suits or private plain clothes not uniform. Severe dementia inpatient dressed uniforms of the jump suits or two piece styles in some dementia care facilities. Second, the problems of dementia inpatient clothing were composed of suitability of raw and subsidiary clothing material, diversity of design and size, durability and form stability of clothes and elastic bands. Third, the design elements similar to those of existing inpatient clothing were preferred with regard to improving dementia inpatient clothing. That is, the design preferences of shirts showed front opening style with buttons, round neckline and a three-quarter-length sleeves. Those of pants came out no opening style with elastic band and full length. Also, pink color and natural patterns were preferred, and the private plain clothing of inpatient and fusion Han-bok style were somewhat preferred.

• 한국재료학회지
• /
• 제9권7호
• /
• pp.670-674
• /
• 1999

탄성계수의 정밀측정은 과학적인 관점과 공학적인 관점 모두 중요하다. 과학적인 관점에서 본다면 탄성계수를 측정함으로써 원자와 원자사이, 이온과 이온 사이의 bending에 관한 해석 및 이해중진의 중요한 도구가 되며 공학적인 측면에서 본다면 공학적인 기계설비에 반드시 고려해야 할 설계기준 중의 하나이다. 본 연구에서는 보다 정확한 탄성계수 측정을 위해 두 가지의 동적 진동실험(음향 공진법과 충격가진 방법)을 비교해 보았으며, 이 두 실험적으로 얻은 공진수파수는 Euler 빔 방정식과 Timoshenko 빔 방정식에 각각 적용하여 그 차이를 비교해 보았다.