• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.17 no.1
• /
• pp.15-23
• /
• 2011

Background: The objective of this study was to determine the effectiveness of the pelvic compression belt (PCB) on the thickness of the transversus abdominis (TrA) during active straight leg raising (ASLR). Methods: Thirty healthy subjects (10 men and 20 women) volunteered to participate in this study. The thickness of TrA was measured using a real-time ultrasonic diagnostic imaging system. Subjects were instructed to rest in a resting (hook-lying) position and to perform ASLR with and without the PCB. The PCB was positioned below the anterior superior iliac spine with stabilizing pressure from elastic bands. Results: In the resting position and during ASLR, the thickness of the TrA significantly differed between subjects with and without PCB (p<.05). In addition, there was a significant interaction between the measurement position and the presence or absence of PCB (p<.05). Conclusions: These findings suggest that the PCB may affect deep core muscles such as TrA during various activities. Further studies are required to generalize the results of the present study.

• Journal of the Korea Convergence Society
• /
• v.7 no.5
• /
• pp.51-57
• /
• 2016

The purpose of this study was to determine the effectiveness of the pelvic compression belt on the thickness of the erector spinae and multifidus during hip extension on quadruped position. Thirty male university students volunteered to participate in this study. The pelvic compression belt was positioned below the anterior superior iliac spines with the stabilizing pressure using elastic compression bands. Subjects were instructed to perform hip extension in quadruped position with and without applying the pelvic compression belt. The thickness of the erector spinae and multifidus was measured ultrasound during prone position, quadruped position without applying pelvic compression belt and quadruped position applying pelvic compression belt. Data were analyzed using repeated ANOVA. Muscle thickness of multifidus was significantly higher applying the pelvic compression belt than without applying the pelvic compression belt (p<.05). Muscle thickness of elector spinae was significantly higher applying the pelvic compression belt than without applying the pelvic compression belt (p<.05). Therefore, the research can contribute to the prescription and application of quadruped position exercises in clinical practices.

• Journal of the Korean Society of Costume
• /
• v.63 no.7
• /
• pp.1-16
• /
• 2013

The objective of this study is to analyze the characteristic of a functional design for a commercial outdoor brand jacket based on 3 types of functions : windproof, waterproof, and cold proof. To analyze the design and fabric characteristics of outdoor jackets by function, 903 men's and women's outdoor jacket images were selected from the catalogues during S/S 2009 - F/W 2011 of the 6 brands: The North Face, Columbia Sports Wear, Kolon Sports, K2, Arcteryx and Mont-Bell. These brands were selected based on their high market share and brand awareness of the outdoor brands in Korea. In this study, design elements analysis was conducted as following 8 elements: hood/collar height/central front flap/waistline/pocket location/ventilation for the body part/sleeve patterns/cuff for the sleeve part. Fabrics were analyzed by the frequency of fabric types used in the 3 jacket types. According to the result derived from the analysis of the six brands of outdoor wear jacket design trends by year, detachable hood and a co-use of velcro and elastic bands have been mainly designed for all of windproof, waterproof, and cold proof jacket to all in order to respond quickly to changes in the external environment. For reinforced storage function on trekking, the number of pockets has been gradually growing, and a function was being developed to connect an electronic device to a pocket. The method, result, and collateral observations relevant to each of these phases are described. Outdoor jacket design characteristics were investigated for outdoor brands, which can provide data to suggest more accurate functional design, and satisfy functional design needs. In this regard, this research was significant in the sense that it suggested preliminary data to reconsider competitiveness of the brand products.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.2
• /
• pp.337-348
• /
• 2002

Based upon literature survey and questionnaire survey, this research tries to develop four new Cleanroom Garment in semiconductor industrial environment. The designs emphasize to minimize workers disconmfort so that they can not only cover human body fully but also reduce dust as much as possible during work hour in clean room. The new designs characteristics and results from both function test and dust emission test are as follows: 1. In order to reduce dust-emission, we develop new designs with hood, kimono sleeve, and back zipper. The designs with hood face positive test results in term of motion suitability and dust-omission. The design with seam in front, in particular, is effective to control dust-emission. 2. For the purpose of reducing dust-emission, we also emphasize to minimize ease of dust-proof wear, with reference to previous research and clothing experiment. The experiment participants report that the new wears are not so comfortable as existing ones, but they accept the new wears positive as effective in reducing dust-emission owing to reduced ease of Cleanroom Garment and sleeves. 3. A1so to reduce dust-emission in inner wear, we put inner wear in both Cleanroom Garments and inner wear, resulting to remove discomfort of wearers when changing clothes and of tight waist due to inner-trousers. 4. We develop new designs with elastic bands in both waist through the side lines and with velcro only at the back side. To remove twist in front contributes to reduce emission arising out of friction, also to free the appearance minding woman workers from worrying about exposed stomach. The new designs need to be accepted as a valuable alternative of Cleanroom Garment, in that they are highly effective to reduce dust-emission, which is the most important factor in the wear, in spite of some drawbacks in terms of motion-suitability, ease and appearance as shown in wearing test.

• Journal of Broadcast Engineering
• /
• v.25 no.5
• /
• pp.734-741
• /
• 2020

This article proposes a new pedestrian avoidance algorithm for social robots that coexist and communicate with humans and do not induce stress caused by invasion of psychological safety distance(Social Distance). To redefine the pedestrian model, pedestrians are clustered according to the pedestrian's gait characteristics(straightness, speed) and a social distance is defined for each pedestrian cluster. After modeling pedestrians(obstacles) with the social distances, integrated navigation algorithm is completed by applying the newly defined pedestrian model to commercial obstacle avoidance and path planning algorithms. To show the effectiveness of the proposed algorithm, two commercial obstacle avoidance & path planning algorithms(the Dynamic Window Approach (DWA) algorithm and the Timed Elastic Bands (TEB) algorithm) are used. Four cases were experimented in applying and non-applying the new pedestrian model, respectively. Simulation results show that the proposed algorithm can significantly reduce the stress index of pedestrians without loss of traveling time.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.56-62
• /
• 2001

When polyethylene terephthalate(PET) film specimen were stepwise elongated under tension with various speeds of about 0.5~500 mm/min, the necking area, consisted of transparent and opaque bands, was formed during plastic deformation. Stress oscillation was apparently obtained in the stress-strain curve of above specimen. However, stress oscillation was not obtained in the stress-strain curve of annealing specimen. Microstructure was examined dynamically using an optical microscopy and thermal analysis was carried out in a differential scanning calorimeter at a heating rate of 10${\circ}$/min. Also, orientation and crystallization were examined using monochromatic-pinhole technique and elastic modulus was measured by a dynamic mechanical analyzer in the temperature range of -150~70 ${\circ}$ with the frequency of 1 Hz. Transparent PET products were fabricated by use of the PET pellets annealed at 83${\circ}$ for 30 min in an electric furnace.

• Journal of Fashion Business
• /
• v.24 no.3
• /
• pp.17-29
• /
• 2020

This study aimed to produce fiber stretch sensors for smart soccer socks to prevent injuries during training. A sensor was manufactured with stretchable fabric and tested to ensure convenience during training. In order to manufacture the fiber stretch sensor, a CNT dispersion solution was applied to an e-band and elastic polyester fabric, and the performance of the sensors was evaluated by a tensile test. Performance evaluation showed that both of the tested fabrics are excellent for this purpose. Both sensors were attached to socks to create prototype wearable devices, and an experiment was conducted to determine whether a resistance change accompanying relaxation and contraction of the gastrocnemius muscle could be detected. In order to accurately evaluate performance as a sensor, the fabric was stretched 20 times at low speeds of 1 Hz and 0.5 Hz. A change in resistance due to tension was observed, with both the E-band and the stretchable poly fabric showing high sensitivity and high reproducibility. Both can be used as relaxation/contraction sensors. Smart soccer socks were made using the two materials, and an evaluation was conducted. Tensile tests were done on the smart soccer socks; the tests were done 20 times per sock, and the sensor showed a stable resistance change between 30 and 40 ohms depending on the tension of the sensor. As a result, we confirmed that smart soccer socks with stretch sensors made of E-bands can measure changes in the gastrocnemius muscle.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.116-135
• /
• 2008

To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer's dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.

• PNF and Movement
• /
• v.17 no.2
• /
• pp.177-187
• /
• 2019

Purpose: The purpose of this study was to investigate the effects of combined training on the physical fitness of male short distance athletes. Methods: Combined training was applied with CLT and isokinetric training three times a week for eight weeks. For CLT, elastic bands were used in the sitting and standing positions to gradually increase sprint and skating movements. Isokinetic training was conducted at $60^{\circ}/sec$ and $180^{\circ}/sec$ to improve muscle strength and muscle power. Results: After the application of combined training, strength (hand force) improved from 42.25 kg to 47.30 kg. Muscle power for standing long jump improved from 240.00 cm to 248.80 cm, while the sergeant jump improved from 55.00 cm to 58.00 cm. Isokinetic testing showed that muscle strength ($60^{\circ}/sec$) improved from 315.65 %BW to 365.79 %BW for the left extensor and from 306.60 %BW to 325.00 %BW for the right extensor. The left flexor improved from 177.23 %BW to 189.47 %BW, but the right flexor decreased slightly from 210.87 %BW to 201.53 %BW. Muscle power ($180^{\circ}/sec$) improved from 254.00 %BW to 293.00 %BW for the left extensor and from 256.00 %BW to 272.00 %BW for the right extensor. The left flexor improved from 150.00 %BW to 162.00 %BW and the right flexor from 145.25 %BW to 182.00 %BW. Conclusion: Combined training could be used as a physical training program for male short distance athletes.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.799-813
• /
• 2022

The environment has increasingly attracted attention and fashion brands need to use new growth models by developing eco-friendly products, along with the drastic climate change. This study drew design guidelines from the factors of clothing disposal and reuse to propose ways to extend the longevity of clothing. It sets the design goals for the longevity extension of clothing as flexibility, originality, durability, and adjustability and drew a specific design guideline. The design methods used to achieve such goals are as follows. First, the design that is flexible in terms of physical changes needs to increase its activity and to be changeable, by applying pleats, rubber bands and elastic materials to the parts with many physical changes and movements. Second, it is necessary to reinforce the brand identity, create design that is flexible in terms of fashion and design very rare and attractive products, for the goal of original design beyond fashion. Third, it is necessary to increase the quality of clothing and improve the durability which can be decreased by washing and wearing. Fourth, it is necessary to create the design that can produce various styles, preserve the state of clothing and maintain its hygienic conditions by using removable detailed designs, shape-transformation designs and the designs which can be adjusted to climate changes and states, for the goal of adjustable design with better functionality. The findings provide ideas for fashion experts to pay more attention to the extending the longevity of clothing products and to develop eco-friendly designs and strategies.