• Applied Microscopy
• /
• 제25권3호
• /
• pp.90-98
• /
• 1995

In the Fe-Si system, a mixture of a($Fe_{2}Si_5$) - and ${\epsilon}$(FeSi)-composition powders was sintered and heat-treated subsequently at various temperatures and time to get thermoelectric ${\beta}$-phase($FeSi_2$) compacts. The different transformational sequences depending on the heat treating temperature were found through the investigation into phase transformation and microstructural development. That is, a rapid eutectoid decomposition of ${\alpha}{\to}{\beta}+Si$ occurred together with a accompanying slow reaction between the dispersed Si formed by above decomposition and the preexisted ${\epsilon}$ phase at temperatures below $830^{\circ}C$. The unreacted Si and the micropores formed due to the density change upon the transformation coarsened as heat treating time elapsed. At temperatures above $880^{\circ}C$, however, transformation was proceeded by a peritectoid reaction of ${\alpha}+{\epsilon}{\to}{\beta}$. It took at least 200min. to achieve 90% volume fracion of transformed ${\beta}$ phase, and the growth of micro-pores was also observed in this transformational sequence with prolonged heat treating time.

• Journal of Oral Medicine and Pain
• /
• 제9권1호
• /
• pp.65-75
• /
• 1984

The present studies, the investigations were undertaken for an attemp to analyze time course change of biogemic amines in respons to bite injury in rats and guinea pigs, and obtained the following results that might be applicable to the forensic medicine and Forensic Odontology. The histamine concentrations measured at rat abdominal skins were decreased during the first 8 hours and recovered to control levels after 12 hours. However the serotonin concentrations were decreased during the first hours and increased during 4-8 hours, and then returned to control levels thereafter. In contrast with these results, both histamine and serotonin concentrations were tended to increase in guinea pig skins, but the concetration of histamine showed maximum rate of increase immediately after injury and those of sertonin showed maximum rate of increase at 30 minutes. The differencd in the response of histamine and serotonine after injury between rats and ginea pigs revealed that there is specials deffrence in the response of biogenic amines with regard to external stimuli. These results suggest that the determinition of biogenic amines in skin lesion of bite marks could be applied to the estimation of the elapsed time after antemortem injury.

• 환경생물
• /
• 제39권3호
• /
• pp.298-310
• /
• 2021

Prediction of the behavior of heavy metals over time is important to evaluate the heavy metal toxicity in algae species. Various modeling studies have been well established, but there is a need for an improved model for predicting the chronic effects of metals on algae species to combine the metal kinetics and biological response of algal cells. In this study, a kinetic dynamics model was developed to predict the copper behavior(5 ㎍ L^-1, 10 ㎍ L^-1, and 15 ㎍ L^-1) for two freshwater algae (Pseudokirchneriella subcapitata and Chlorella vulgaris) in the chronic exposure experiments (8 d and 21 d). In the experimental observations, the rapid change in copper mass between the solutions, extracellular and intracellular sites occurred within initial exposure periods, and then it was slower although the algal density changed with time. Our model showed a good agreement with the measured copper mass in each part for all tested conditions with an elapsed time (R² for P. subcapitata: 0.928, R² for C. vulgaris: 0.943). This study provides a novel kinetic dynamics model that is compromised between practical simplicity and realistic complexity, and it can be used to investigate the chronic effects of heavy metals on the algal population.

• 한국환경복원기술학회지
• /
• 제23권6호
• /
• pp.57-73
• /
• 2020

A study was conducted to present the criteria for evaluating the revegetation method of the slope of the expressway. The results of comparative analysis between 2019-2020 field survey and existing research data (2015-2016) are as follows. Soil is a very important factor at the beginning of revegetation work. However, after the plant has settled, the importance of the soil composition diminishes. Among the plants used, the number of plants sown at the beginning gradually decreases. And it changes as it competes with invading plants. Among the plants used for sowing, it was found to affect the vegetation composition in the order of exotic grass > native herb and wildflower > native tree. Plant coverage is continuously evaluated as an important factor regardless of the time. The vegetation structure on the slope will change continuously over time. New items need to be evaluated in situations where a lot of time has elapsed since the application of revegetation work. It is desirable to use the current evaluation standard only to perform the evaluation within 1 to 2 years. In the long run, it is necessary to establish a new evaluation standard that adjusts the weights of each item.

• 대한가정학회지
• /
• 제23권4호
• /
• pp.55-60
• /
• 1985

This study was carried out to compare the change of free amino acid content in the radish Kimchi added with anchovy pickle sauce with that added with 15% NaCl solution during 30 days fermentation. RESULTS : 1. During the fermentation, the pH of both sample A and B showed the highest values of 7.3 and 7.1, respectively, and then both decreased continually to the lowest value of 4.2 at the 30th day. 2.The salinity in the juice of sample A was higher than that of sample B in all the steps during fermentation, accompanied with a slight decrease of the salinity in both cases with time elapsed. 3. The free amino-type nitrogen content of sample A was nearly duplicated in the final step than in the initial one,while that of sample B showed no significant changes in all the processing period. 4. The free amino acids detected in the both samples were aspartic acid, threonine, serine, proline, glutamic acid, glycine, alanine, tyrosine, cysteine, valine, methinonine, isoleucine, leucine, phenylalanine, $\gamma-aminobutyrix acid(\ulcorner), ornithine, lysine, histidine and arginine. 5. The amounts of proline, arginine were the highest in all free amino acids during fermentation, and tasty components of radish Kimchi seemed to relate to glutamic acid, alanine, isoleucine, leucine, phenylalanine, more deliciousness of Kimchi A and B seemed to derive from amino acids of anchovy pickle sauce added to Kimci A, such as alanine, valine, phenylalanine, lysine.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1155-1160
• /
• 2008

In the present study investigated the heat dissipation characteristics of the natural convection type radiator by using the latent heat from a solid-liquid PCM(Phase Change Material). Total radiator volume size is $423{\times}295{\times}83\;mm$ and PCM tank size is $398{\times}270{\times}26\;mm$. The objective was elapsed time lower than maximum operating temperature. Experimental condition, in order to study the effects of the phase-change phenomenon, carried out the various mass flow rate, input electric power, and heat of fusion temperature of two type PCMs. For the above experimental conditions, the cooling performance by using the latent heat showed that heat absorption rate performs for about 3 hours from using PCM $38^{\circ}C$. However, cooling performance by using PCM $50^{\circ}C$ showed higher than surface temperature of heater block because of heat of fusion.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.63-70
• /
• 1984

It was the purpose of this study to determine the galvanic current between a gold alloy inlay and four types of amalgam using the circuit through pulp chambers when the freshly extracted teeth with those restorations were brought into contact in a physiologic saline solution, and to investigate the effectiveness of cavity varnish or ammonated silver-nitrate on the surface of amalgam restoration in reducing galvanic current. The current was measured with current-to-voltage converter and recored on a physiograph 6630-257. The following results were obtained. 1. Generally, galvanic current decreased as the time elapsed. 2. Galvainc current decreased significantly in the first day and after then minimal change was observed until 30th day. 3. Initial galvanic current was 29.6 ${\mu}A$ in the cut amalgam and 24.5 ${\mu}A$ in Dispersalloy amalgam and after then the current was significantly decreased. 4. Initial galvanic current was 12.6 ${\mu}A$ in spherical amalgam (low copper amalgam) and 13.8 ${\mu}A$ in Tytin amalgam and the amount of change was lower in sperical amalgam and Tytin amalgam than that in lathe cut amalgam and Dispersalloy amalgam. 5. Painting ammoniated silver-nitrate or Copalite on the surface of amalgam resotration decreased initial galvanic current and ammoniated silver-nitrate is more effective in decreasing galvanic current than Copalite. 6. Galvanic current by contact between amalgam restoration and gold restoration increased abruptly and dropped rapidly becoming almost.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.57-66
• /
• 2017

준설 매립 부지의 최종 계획고를 얻기 위한 초기 준설 매립량과 매립두께를 결정하고 자중압밀에 소요되는 시간을 예측하기 위해 인천지역 항로 준설 시료에 대한 자중압밀시험과 공학적 특성을 분석하였다. 준설투기된 시료의 시간경과에 따른 함수비, 간극비 및 체적변화비에 관한 인자를 Yano의 경험식을 이용하여 평가하였다. 세립분 함유율이 낮은 경우 침강압밀계수의 변화폭이 작게 나타났으며, 세립분 함유율 50%에서 가장 크게 나타났다. 자중압밀에 따른 체적변화비를 이용하여 준설매립공사에 제시된 입도별 유보율의 포괄적인 측면을 보완할 수 있는 세립분 함유율에 따른 유보율을 산정하여 제시하였다.

• 지질공학
• /
• 제25권2호
• /
• pp.165-178
• /
• 2015

Physical and chemical weathering degrades rock, affecting its structural properties and thus the stability of stone buildings or other structures. Confocal laser scan microscopy (CLSM) is used here to observe temporal changes in the surface roughness of rock samples under simulated accelerated weathering. Samples were pressurized to 50, 55, or 70 MPa using a pressure frame, and subjected to freeze/thaw cycling controlled by a thermostat. The temperature was cycled from -20℃ to 40℃ and back. After each 20 cycles, CLSM was used to assess the change in surface roughness, and roughness factors were calculated to quantify the progression of the surface condition over time. Variations in cross-section line-roughness parameters and surface-roughness parameters were analyzed for specific parts of the sample surfaces at 5× and 50× magnification. The result reveals that the highest and lowest values of the roughness factors are changed according to elapsed time. Freezing/thawing at high pressure caused larger changes in the roughness factor than at low pressure.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.18-23
• /
• 2018

To study the impedance characteristics of a fluorescent OLED according to the device structure, we fabricated Device 1 using ITO / NPB / $Alq_3$ / Liq / Al, Device 2 using ITO / 2-TNATA / NPB / $Alq_3$ / Liq / Al, and Device 3 using ITO / 2-TNATA / NPB / SH-1:BD / $Alq_3$ / Liq / Al. The current density and luminance decreased with an increasing number of layers of the organic thin films in the order of Device 1, 2, 3, whereas the current efficiency increased. From the Cole-Cole plot at a driving voltage of 6 V, the maximum impedance values of Devices 1, 2, and 3 were respectively 51, 108, and $160{\Omega}$ just after device fabrication. An increase in the impedance maximum value is a phenomenon caused by the charge mobility and the resistance between interfaces. With the elapse of time after the device fabrication, the shape of the Cole-Cole plot changed to a form similar to 0 or a lower voltage due to the degradation of the device. As a result, we were able to see that an impedance change in an OLED reflects the characteristics of the degradation and the layer.