• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.1062-1070
• /
• 2022

In the present communication, pure and stable α-Bismuth Oxide (Bi₂O₃) nanoparticles (NPs) were synthesized by low temperature solution combustion method using urea as a fuel and calcined at 500℃. The synthesized sample was characterized by using powder X-ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Energy dispersive X-ray analysis (EDAX), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and UV-Visible absorption spectroscopy. The PXRD pattern confirms the formation of mono-clinic, stable and low temperature phase α-Bi₂O₃. The direct optical energy band gap was estimated by using Wood and Tauc's relation which was found to be 2.81 eV. The characterized sample was studied for X-ray/gamma ray shielding properties in the energy range 0.081-1.332 MeV using NaI (Tl) detector and multi channel analyzer (MCA). The measured shielding parameters agrees well with the theory, whereas, slight deviation up to 20% is observed below 356 keV. This deviation is mainly due to the influence of atomic size of the target medium. Furthermore an accurate theory is necessary to explain the interaction of X-ray/gamma ray with the NPs.The present work opens new window to use this facile, economical, efficient, low temperature method to synthesize nanomaterials for X-ray/gamma ray shielding purpose.

• Korean Journal of Ichthyology
• /
• v.33 no.2
• /
• pp.95-106
• /
• 2021

In order to understand the seasonal variations of species composition of fish in the Goseong, middle East Sea of Korea, we surveyed fish fauna using set net during 2 years. In this study, a total of 77 taxa belonging to 40 families were collected and 75 species were identified. The dominant family were Tetraodontidae and Pleuronectidae, and the dominant species were Arctoscopus japonicus, Konosirus punctatus, Stephanolepis cirrhifer, Thamnaconus modestus, and Trachurus japonicus. The results of the hierarchical clustering using the number of individuals of collected species showed that they are divided into three seasonal groups: Group A (Jan.~Apr.), Group B (May~Jun., Nov.~Dec.), Group C (Jul.~Oct.). The sea surface temperature (SST) was higher than the results of previous studies in winter and spring, and species composition in spring have changed from cold-water species to the warm-water species, recently. The species composition has become similar to the that of southern Gangwon-do regions (Samcheok and Gangneung) of the previous studies. The species diversity of family Tetraodontidae has increased, which is estimated to have an effect on increase in SST and the quantity of entering the East Sea. Therefore, we assumed that the change of species composition is related to the extension of northern distribution limits and survival temperature, and abundant preys. Therefore, it is necessary that an efficient resource management policy as well as the ways of commercially use of migratory warm-water fish, rapidly.

• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.151-177
• /
• 1975

To obtain the informations on the checking factors of the effecient utilization of paddies in chungnam province and study on the effecient working system and high productive cropping system in paddies, the utilization state of paddies including environmental conditions were investigated at sample 1,500 farms. The results obtained are summarized as follows; 1. The difficulty of drainage in paddies was the most important factor checking the utility of paddies. Delayed transplanting of rice and lack of labour were also important checking factors on the efficient utilization of paddies. 2. The utilization of paddies was rather effecient at small size farms of which farmers were almost poor, and most of them cultivated barley for their own food. 3. Considering climatic conditions, pre-crops of rice must be harvested before June 10 tho and the marginal transplanting date of rice plant is June 25 th. 4. In case of planting barley as a post-crop after rice, the spread seeding by rotary before plowing was most efficient with lowest cost. 5. Considering rice cultivation, yield of barley and net income, the most efficient cropping system was "Josaengtongil + Olbori".

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.369-376
• /
• 2003

Coulson (ZINDO), Mulliken $(MP2/6-31G^*)$ and Natural $(MP2/6-31G^*)$ population analyses of several large molecules were performed by the Fragment Reassociation (FR) method. The agreement between the conventional ZINDO (or conventional MP2) and FR-ZINDO (or FR-MP2) charges of these molecules was excellent. The standard deviations of the FR-ZINDO net atomic charges from the conventional ZINDO net atomic charges were 0.0008 for $C_{10}H_{22}$ (32 atoms), 0.0012 for $NH_2-C_{16}O_2H_{28}-COOH$ (53 atoms), 0.0014 for $NH_3^+-C_{16}O_2H_{28}-COOH$ (54 atoms), 0.0017 for $NH_2-C_{16}O_2H_{28}-COO^-$ (52 atoms), 0.0019 for $NH_3^+-C_{16}O_2H_{28}-COO^-$ (53 atoms), 0.0024 for a conjugated model $(O=CH-(CH=CH)_{15}-C=O-(CH=CH)_{12}-CH=CH_2)$, 118 atoms), 0.0038 for aglycoristocetin $(C_{60}N_7O_{19}H_{52}^+$, 138 atoms), 0.0023 for a polypropylene model complexed with a zirconocene catalyst $(C_{68}H-{121}Zr^+$, 190 atoms) and 0.0013 for magainin $(C_{112}N_{29}O_{28}SH_{177}$, 347 atoms), respectively. The standard deviations of the FR-MP2 Mulliken (or Natural) partial atomic charges from the conventional ones were 0.0016 (or 0.0016) for $C_{10}H_{22}$, 0.0019 (or 0.0018) for $NH_2-C_{16}O_2H_{28}-COOH$ and 0.0033 (or 0.0023) for $NH_3^+-C_{16}O_2H_{28}-COO^-$, respectively. These errors were attributed to the shape of molecules, the choice of fragments and the degree of ionic characters of molecules as well as the choice of methods. The CPU time of aglycoristocetin, conjugated model, polypropylene model complexed with zirconocene and magainin computed by the FR-ZINDO method was respectively 2, 4, 6 and 21 times faster than that by the normal ZINDO method. The CPU time of $NH_2-C_{16}O_2H_{28}-COOH\;and\;NH_3^+-C_{16}O_2H_{28}-COO^-$ computed by the FR-MP2 method was, respectively, 6 and 20 times faster than that by the normal MP2 method. The largest molecule calculated by the FR-ZINDO method was B-DNA (766 atoms). These results will enable us to compute atomic charges of huge molecules near future.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.620-635
• /
• 2010

In this paper we describe current activities on the project Multi-Scale Modeling and Analysis of convective boiling (MSMA), conducted jointly by the Paul Scherrer Institute (PSI) and the Swiss Nuclear Utilities (Swissnuclear). The long-term aim of the MSMA project is to formulate improved closure laws for Computational Fluid Dynamics (CFD) simulations for prediction of convective boiling and eventually of the Critical Heat Flux (CHF). As boiling is controlled by the competition of numerous phenomena at various length and time scales, a multi-scale approach is employed to tackle the problem at different scales. In the MSMA project, the scales on which we focus range from the CFD scale (macro-scale), bubble size scale (meso-scale), liquid micro-layer and triple interline scale (micro-scale), and molecular scale (nano-scale). The current focus of the project is on micro- and meso-scales modeling. The numerical framework comprises a highly efficient, parallel DNS solver, the PSI-BOIL code. The code has incorporated an Immersed Boundary Method (IBM) to tackle complex geometries. For simulation of meso-scales (bubbles), we use the Constrained Interpolation Profile method: Conservative Semi-Lagrangian $2^{nd}$ order (CIP-CSL2). The phase change is described either by applying conventional jump conditions at the interface, or by using the Phase Field (PF) approach. In this work, we present selected results for flows in complex geometry using the IBM, selected bubbly flow simulations using the CIP-CSL2 method and results for phase change using the PF approach. In the subsequent stage of the project, the importance of effects of nano-scale processes on the global boiling heat transfer will be evaluated. To validate the models, more experimental information will be needed in the future, so it is expected that the MSMA project will become the seed for a long-term, combined theoretical and experimental program.

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.380-387
• /
• 2015

A lead slowing-down spectrometer (LSDS) system is a promising nondestructive assay technique that enables a quantitative measurement of the isotopic contents of major fissile isotopes in spent nuclear fuel and its pyroprocessing counterparts, such as $^{235}U$, $^{239}Pu$, $^{241}Pu$, and, potentially, minor actinides. The LSDS system currently under development at the Korea Atomic Energy Research Institute (Daejeon, Korea) is planned to utilize a high-flux ($>10^{12}n/cm^2{\cdot}s$) neutron source comprised of a high-energy (30 MeV)/high-current (~2 A) electron beam and a heavy metal target, which results in a very intense and complex radiation field for the facility, thus demanding structural shielding to guarantee the safety. Optimization of the structural shielding design was conducted using MCNPX for neutron dose rate evaluation of several representative hypothetical designs. In order to satisfy the construction cost and neutron attenuation capability of the facility, while simultaneously achieving the aimed dose rate limit (< $0.06{\mu}Sv/h$), a few shielding materials [high-density polyethylene (HDPE)eBorax, $B_4C$, and $Li_2CO_3$] were considered for the main neutron absorber layer, which is encapsulated within the double-sided concrete wall. The MCNP simulation indicated that HDPE-Borax is the most efficient among the aforementioned candidate materials, and the combined thickness of the shielding layers should exceed 100 cm to satisfy the dose limit on the outside surface of the shielding wall of the facility when limiting the thickness of the HDPE-Borax intermediate layer to below 5 cm. However, the shielding wall must include the instrumentation and installation holes for the LSDS system. The radiation leakage through the holes was substantially mitigated by adopting a zigzag-shape with concrete covers on both sides. The suggested optimized design of the shielding structure satisfies the dose rate limit and can be used for the construction of a facility in the near future.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.869-877
• /
• 2020

A 24-month Advanced Power Reactor 1400 (APR1400) core with a very-low-boron (VLB) concentration has been investigated for an inherently safe and high-performance PWR in this work. To develop a high-performance APR1400 which is able to do the passive frequency control operation, VLB feature is essential. In this paper, the centrally-shielded burnable absorber (CSBA) is utilized for an efficient VLB operation in the 24-month cycle APR1400 core. This innovative design of the VLB APR1400 core includes the optimization of burnable absorber and loading pattern as well as axial cutback for a 24-month cycle operation. In addition to CSBA, an Er-doped guide thimble is also introduced for partial management of the excess reactivity and local peaking factor. To improve the neutron economy of the core, two alternative radial reflectors are adopted in this study, which are SS-304 and ZrO₂. The core reactivity and power distributions for a 2-batch equilibrium cycle are analyzed and compared for each reflector design. Numerical results show that a VLB core can be successfully designed with 24-month cycle and the cycle length is improved significantly with the alternative reflectors. The neutronic analyses are performed using the Monte Carlo Serpent code and 3-D diffusion code COREDAX-2 with the ENDF/B-VII.1.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.151-158
• /
• 2009

To implement the insects' flapping flight for developing flapping MAVs(micro air vehicles), the unsteady flow characteristics of the insects' forward flight is investigated. In this paper, two-dimensional FSI(Fluid-Structure Interaction) simulations are conducted to examine realistic flow features of insects' flapping flight and to examine the flexibility effects of the insect's wing. The unsteady incompressible Navier-Stokes equations with an artificial compressibility method are implemented as the fluid module while the dynamic finite element equations using a direct integration method are employed as the solid module. In order to exchange physical information to each module, the common refinement method is employed as the data transfer method. Also, a simple and efficient dynamic grid deformation technique based on Delaunay graph mapping is used to deform computational grids. Compared to the earlier researches of two-dimensional rigid wing simulations, key physical phenomena and flow patterns such as vortex pairing and vortex staying can still be observed. For example, lift is mainly generated during downstroke motion by high effective angle of attack caused by translation and lagging motion. A large amount of thrust is generated abruptly at the end of upstroke motion. However, the quantitative aspect of flow field is somewhat different. A flexible wing generates more thrust but less lift than a rigid wing. This is because the net force acting on wing surface is split into two directions due to structural flexibility. As a consequence, thrust and propulsive efficiency was enhanced considerably compared to a rigid wing. From these numerical simulations, it is seen that the wing flexibility yields a significant impact on aerodynamic characteristics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.235-241
• /
• 2014

There are many traffic problems in a city such as parking, traffic jam caused by traffic induction facility. Therefore it is essential to demand for traffic demand management to building's owner whose building location causes traffic induction. According to the 90s traffic policy, government collects fee for traffic induction facility through traffic policy management and they encourage the building owner to join reduction of traffic jam program by reduction of traffic induction fee. However there are not many buildings owner joined this program because the program is not ghat beneficial. For example, if government set out parking guidance system (part of parking demanding system) in a city, it will reduce to 20% of traffic induced contributions but t can be used only once a year, so it is not efficient to used even it is valuable for about 10 years. In particular, according to the economic efficiency analysis, evaluate economically as net present value (NPV) to 2,160.44 million won, ratio of benefit/cost (B / C) to 2.44 during 10 years. Therefore this research will find out what is necessary for parking guidance system.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.61-68
• /
• 2011

To assess the total cost with all stages of facilities, the feasibility of Life Cycle Cost (LCC) analysis was examined in this study to estimate the livestock manure treatment system and optimal decision making process. For the economic evaluation, the plant/equipment investment and annual operation cost of four Public Livestock Recycling Facilities, whose treatment capacity is 100 ton piggery manure per day, was compared. The initial cost was in the range of 2,699 million won to 3,202 million won, where T and E methods were highest and lowest, respectively. The annual operation cost was in the level of 378 million to 498 million won, which decreased in the following order : T method > J method > E method > B method. For the LCC analysis, 4.7% of interest rate, 3.13% of inflation rate, and 1.52% of net discount rate was considered by the data received from Bank of Korea and Statics Korea in the period of 2000 to 2009. Also, for the calculation of present value factor, the durable years of civil engineering & construction, machinery and electric instrument was 30 years, 10 years and 15 years, respectively. Based on these consideration, operation cost was in the range of 17,570 won/ton to 20,661 won/ton, and E method (17,570 won/ton) was economical and B method (20,661 won/ton) was non-economical. Though initial cost of T method was higher than that of B method, LCC analysis of T method was lower than that of T method due to the lower operation cost. Therefore, LCC analysis, which considers both initial cost and operation cost, is more reasonable evaluation method than either initial cost or annual operation cost. For the change of LCC analysis according to the uncertainty, the sensitivity analysis was carried out using fluctuation magnitude of discount rate in the period of 2000 to 2009. As a result, LCC analysis evaluated by discount rate was stable for the uncertain factors since the cost leadership did not change even though the sensitivity analysis varied. In summary, the economic evaluation using LCC analysis could be an efficient reference to choose the suitable livestock manure treatment plants. Furthermore, standardization of statement calculation for the actual cost analysis should be conducted and more detailed study is necessary to validate this summary. Therefore, the application of comprehensive technology evaluation, which considers LCC analysis, should contribute in obtaining objectivity and enhancing reliability for the 'Evaluation of Livestock Manure Treatment System and its Technology'.