• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.61-70
• /
• 2008

This study was conducted to develop a mobile tower-yarder with tractor for agriculture and forestry that is the efficient yarder in steep terrains, thinning operation and small scale logging operation. It was designed and manufactured that the power source of tower-yarder is equiped three hydraulic pump connected to PTO of tractor, and three hydraulic pump is used to operate the four motor for drum, the cylinder for clutch of interlocker, the cylinder for tower expanding and the out-rigger cylinder. It was to adopt the running skyline system and the inter-lock function, and to equip the double capstan drum, the storage drum and the clutch for interlock in the development of tower-yarder. It was to develop the tower-yarder which the winch torque of double-capstan drum, the traction force of double-capstan drum, the number of rotation of double-capstan drum and the line speed is $191kg{\cdot}m$, 1,910 kgf, 220.5 rpm and 138.5 m/min, respectively. And it was known that the optimum flange diameter of the main and haulback storage drum is about 360 mm and about 460 mm in order to storage the main line length of 250m and the haulback line length of 450 m. The carriage was made to adopt the running skyline system and to equip the lock function in order to the convenience of chocking and the fall down preventing of tree. It was provided to develop the wire remote controller for the inter-lock function, the convenience of control and the efficiency of yarding. In development process, this tower-yarder was attached the 3-point linkage hitch equipment and the tire wheel for the traction and moving of tower-yarder. Also, it was equipped that the out-rigger and the guy line in order to raise the safety and efficiency of yarding of tower-yarder.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.676-683
• /
• 2007

In an attempt to develop an efficient method for the propagation of mature Prunus yedoensis (45 to 55 years old), green wood cuttings from normal branch and sprouts branch were treated with three different kinds of auxin (Rootone < 1-naphthylacetamide 0.4% >, IBA 100 ppm, and control and two different kinds of fog systems (0.9 L/min. and 0.54 L/min.). The Rootone treatment showed higher values in the percentage of rootings (PR) and the mean number of roots per cutting (NR) than the IBA treatment in the early stage. However, in the late stage, the values of PR and NR in the Rootone treatment become lower than those in the IBA 100 ppm treatment. On the other hand, root development ceased 62 days after taking cuttings for all of the treatments. The IBA 100 ppm treatment showed the best performance in root development (PR= 89.5%, NR = 6.5, LR=6.4 cm). The values of PR (76.5%) and NR (6.4) in the 0.9 L/min. of fog treatment was higher than those (PR = 71.7% and NR = 5.4) in the 0.54 L/min. of fog treatment. The cuttings from sprouts (PR: 74.8%, NR: 5.9, LR: 5.7 cm) showed slightly better performance in rooting rate that the cuttings from shoots (PR : 73.3%, NR: 5.9, LR: 5.4 cm). Statistically significant interactions were presented among most of the different combinations of three factors (auxin treatments, fog treatments, and types of cuttings). The PR showed the highest value of 98.0% in the combination of cuttings of shoots+IBA 100 ppm+0.54 L/min. fog treatments. In case of NR, the cuttings from normal branch showed a higher value than the cuttings from sprouts branch under the fog treatment of 0.9 L/min., while this tendency was reversed under the fog treatment of 0.54 L/min.. The perigon development of roots, which reflects the number and the direction of roots, was best in the IBA treatment (85.6%).

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.12
• /
• pp.1734-1740
• /
• 2001

Feeding trials using weanling pigs and broiler chicks were conducted to evaluate the efficacy of different metal-amino acid chelates and complexes at various levels of copper and zinc on the performance and fecal excretions. A total of 200 weanling pigs (Large White ${\times}$ Yorkshire ${\times}$ Duroc, $11.20{\pm}0.81kg$) were randomly assigned to 5 dietary treatments following a randomized complete block design. Each treatment was replicated 4 times with 10 pigs per pen. The dietary treatments were designated as : A-diet containing 170 ppm Cu from $CuSO_4$ and 120 ppm Zn from $ZnSO_4$, B-diet containing 85 ppm Cu from Cu-amino acid chelate (CAC) and 60 ppm Zn from Zn-amino acid chelate (ZAC), C-diet containing 170 ppm Cu from CAC and 120 ppm Zn from ZAC, D-diet containing 85 ppm Cu from Cu-lysine complex (CL) and 60 ppm Zn from Zn-methionine complex (ZM), and E-diet containing 170 ppm Cu from CL and 120 ppm Zn from ZM. On the other trial, 144 of one day old broiler chicks were randomly distributed to 6 dietary treatments following a completely randomized design. Each treatment was replicated 3 times with 8 chicks per replicate. The dietary treatments were as follows: 1-diet with 60 ppm Cu from $CuSO_4$ and 40 ppm Zn from $ZnSO_4$, 2-diet with 120 ppm Cu from $CuSO_4$ and 80 ppm Zn from $ZnSO_4$, 3-diet with 60 ppm Cu from CAC and 40 ppm Zn from ZAC, 4-diet with 120 ppm Cu from CAC and 80 ppm Zn from ZAC, 5-diet with 60 ppm Cu from CL and 40 ppm Zn from ZM, and 6-diet with 120 ppm Cu from CL and 80 ppm Zn from ZM. In Exp. 1 with pigs, there was no difference on average daily gain and average daily feed intake observed among treatments. There was improvement (p<0.05) on the overall feed conversion ratio (FCR) of pigs fed diet containing 120 ppm Zn and 170 ppm Cu from metal-amino acid chelates relative to those fed diet containing inorganic sources of Cu and Zn but equally efficient as those fed diet containing metal-amino acid complexes. Pigs fed diet containing either metal-amino acid chelates or complexes as sources of Cu and Zn had higher (p<0.05) Cu and Zn concentration in serum and lower (p<0.05) in feces than those receiving diet with inorganic sources. In Exp. 2 with broiler chicks, the overall FCR was not different among treatments. Higher (p<0.05) Cu and Zn concentration in serum was obtained from birds fed diet with 60 ppm Cu and 40 ppm Zn from metal-amino acid chelates compared to those fed diet with inorganic sources of Cu and Zn. Also, the feces collected from birds fed diet with either metal-amino acid chelates or complexes contained generally lower Cu and Zn than those birds fed diet with inorganic sources. The higher the dietary level of Cu and Zn the higher the Cu and Zn concentration in the feces. Based on the results, both metal-amino acid chelates and complexes of Cu and Zn at low levels (Zn 60 ppm, Cu 85 ppm for weanling pigs and Zn 40 ppm, Cu 60 ppm for broiler chicks) are not different from that of high levels of inorganic sources in maintaining growth performance and serum concentration. The fecal excretions for Cu and Zn were greatly reduced when organic sources were used.

• Journal of Korean Academy of Nursing Administration
• /
• v.1 no.1
• /
• pp.132-146
• /
• 1995

Even though Korean medical law stipulates that number of patients attended by a nurse is 2.5 for hospitalization and 30 for ambulatory care, the number of patients cared by a nurse per day is much greater than the standard prescribed by the medical law. Current productivity of nurses is not desirable unless the quality of care is considered. And nursing manpower staffing based on neither current nurses' productivity nor standard of medical law cannot respond properly to dynamic situation of the medical services. Under this background, the necessity of more efficient management of nursing manpower occupying 1/3 of total hospital workers has been recognized by many nursing administrators. Many nursing researchers have studied to foretell the nursing manpower objectively on the basis of measured nursing workload according to patient classification as well. Most of These researches, however, have been conducted in the tertiary hospitals, so it is imperative to conduct other researches to predict necessary nursing manpower in the secondary and the primary hospitals. The study was performed to measure nursing workload and predict pertinent nursing manpower to a secondary hospital with 400beds. Nursing workload was surveyed using measuring tool for direct and indirect care hours in a surgical unit and a medical unit. Survey was conducted from Sep.10 to Sep.16 and from Oct.5 to Oct.11, 1994 respectively by two skilled nurses, Subjects were patients, patients' family members and nursing personnels. Results are follows : 1. Patient classification distributed as 22% of class I (mildly ill patient), 57% of class II (moderately ill patient), and 21% of class III (acutely ill patient) in the medical nursing unit, while 23% of class I, 29% of class II, 12% of class III, and 36% of classIV (critically ill patient) in the surgical nursing unit. There was no difference of inpatient number between weekday and weekend. Bed circulation rate was 89% in both units and average patients number per day was 37.4 (total 42beds) in the medical nursing unit, 32.9 (total 37beds) in the medical nursing unit. 2. Direct care hours per day measured as 2.8hrs for class I, 3.3hrs for class II, and 3.5hrs for class III in the medical nursing unit, while 3.1hrs for class I, 3hrs for class II, 2.7hrs for class III, and 2.2hrs for classIV in the surgical nursing unit. Meanwhile, hours for nursing assistant activities per patient by patients' family members were 11mins and 200mins respectively. Direct care hour rate by shift was day 36%, evening 25%, and night 39% in the medical nursing unit, while 40%, 29%, and and 31% respectively in the surgical nursing unit. 3. Measurement and observation activity held 44.2% of direct care activities of nurses and medication 36.7%, communication 11.7%, exercise 1.8%, treatment 1.3%, hygiene 1.3%, elimination and irrigation 1.1%, suction 1%, nutrition 0.5%, thermotherapy 0.3%, oxygen therapy 0.1% in order. 4. Indirect care hours per day were 294.2mins in the medical nursing unit, and 273.9mins in the surgical nursing unit. By shift, evening was the highest in both units. Indirect care hours for each patient were 44.5mins in the medical nursing unit and 46mins in the surgical nursing unit. 5. checking activities including doctor's order, medication, and delivering patients to the next shift occupied 39.7% of indirect care activities, and preparation 26%, recording 23.8%, communication and conference 6.7%, managing equipments 2.1%, messenger activity 1.7% in order. 6. On the ground of these results, nursing manpower needed in a secondary hospital was estimated ; 27 nursing personnels for the medical nursing unit of 37beds, and 20 nursing personnels for the surgical nursing unit of 33beds.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.64-72
• /
• 2014

This study quantified the storage and annual uptake of carbon by apple trees in orchards as a production-type greenspace, and computed the annual carbon emissions from apple cultivation. Tree individuals in the study orchards were sampled to include the range of stem diameter sizes. The study measured biomass for each part including the roots of sample trees through a direct harvesting method to compute total carbon storage per tree. Annual carbon uptake per tree was quantified by analyzing the radial growth rates of stem samples at ground level. Annual carbon emissions from management practices such as pruning, mowing, irrigation, fertilization, and use of pesticides and fungicides were estimated based on maintenance data, interviews with managers, and actual measurements. Regression models were developed using stem diameter at ground level (D) as an independent variable to easily estimate storage and annual uptake of the carbon. Storage and annual uptake of carbon per tree increased as D sizes got larger. Apple trees with D sizes of 10 and 15 cm stored 9.1 and 21.0 kg of carbon and annually sequestered 1.0 and 1.6 kg, respectively. Storage and annual uptake of carbon per unit area in study orchards were 3.81 t/ha and 0.42 t/ha/yr, respectively, and annual carbon emissions were 1.30 t/ha/yr. Thus, the carbon emissions were about 3 times greater than the annual carbon uptake. The study identified management practices to reduce the carbon footprint of production-type greenspace, including efficient uses of water, pesticides, fungicides, and fertilizers. It breaks new ground by including measured biomass of roots and a detailed inventory of carbon emissions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.69-80
• /
• 2015

This can be promoted collaboration environment for the system and the system is very important for competitiveness, it is equipped. If so, could work in collaboration with members of the organization to promote collaboration what factors? Organizational collaboration and cooperation of many people working, or worth pursuing common goals by sharing information and processes to improve labor productivity, defined as collaboration. Factors that promote collaboration are shared visions, the organization's principles and rules that reflect the visions, on-line system developments, and communication methods. First, it embodies the vision shared by the more sympathetic members are active and voluntary participation in the activities of the organization can be achieved. Second, the members are aware of all the rules and principles of a united whole is accepted and leads to good performance. In addition, the ability to share sensitive business activities for self-development and also lead to work to make this a regular activity to create a team that can collaborate to help the environment and the atmosphere. Third, a systematic construction of the online collaboration system is made efficient and rapid task. According to Student team and A corporation we knew that Cloud services and social media, low-cost, high-efficiency services could achieve. The introduction of the latest information technology changes, the members of the organization's systems and active participation can take advantage of continuing education must be made. Fourth, the company to inform people both inside and outside of the organization to communicate actively to change the image of the company activities, the creation of corporate performance is very important to figure. Reflects the latest trend to actively use social media to communicate the effort is needed. For development of systematic collaboration promoting model steps to meet the organizational role. First, the Chief Executive Officer to make a firm and clear vision of the organization members to propagate the faith, empathy gives a sense of belonging should be able to have. Second, middle managers, CEO's vision is to systematically propagate the organizers rules and principles to establish a system would create. Third, general operatives internalize the vision of the company stating that the role of outside companies must adhere. The purpose of this study was well done in collaboration organizations promoting factors for strategic alignment model based on the golden circle and collaboration to understand and reflect the latest trends in information technology tools to take advantage of smart work and business know how student teams through case analysis will derive the success factors. This is the foundation for future empirical studies are expected to be present.

• Progress in Medical Physics
• /
• v.22 no.1
• /
• pp.28-34
• /
• 2011

To perform the Adaptive Radiation Therapy (ART), a high degree of deformable registration accuracy is essential. The purpose of this study is to identify whether the change of MV CBCT intensity can improve registration accuracy using predefined modification level and filtering process. To obtain modification level, the cheese phantom images was acquired from both kilovoltage CT (kV CT), megavoltage cone-beam CT (MV CBCT). From the cheese phantom images, the modification level of MV CBCT was defined from the relationship between Hounsfield Units (HUs) of kV CT and MV CBCT images. 'Gaussian smoothing filter' was added to reduce the noise of the MV CBCT images. The intensity of MV CBCT image was changed to the intensity of the kV CT image to make the two images have the same intensity range as if they were obtained from the same modality. The demon deformable registration which was efficient and easy to perform the deformable registration was applied. The deformable lung phantom which was intentionally created in the laboratory to imitate the changes of the breathing period was acquired from kV CT and MV CBCT. And then the deformable lung phantom images were applied to the proposed method. As a result of deformable image registration, the similarity of the correlation coefficient was used for a quantitative evaluation of the result was increased by 6.07% in the cheese phantom, and 18% in the deformable lung phantom. For the additional evaluation of the registration of the deformable lung phantom, the centric coordinates of the mark which was inserted into the inner part of the phantom were measured to calculate the vector difference. The vector differences from the result were 2.23, 1.39 mm with/without modification of intensity of MV CBCT images, respectively. In summary, our method has quantitatively improved the accuracy of deformable registration and could be a useful solution to improve the image registration accuracy. A further study was also suggested in this paper.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.81-91
• /
• 2020

As part of method for ecologically utilizing abandoned paddy, potential of the abandoned paddy as a target site for ex-situ conservation of 9 endangered species of different life form was confirmed by considering the nature of rice paddy. In order to create Dum-bung, a component of traditional Korean rice paddy, a part of the abandoned paddy was modified to change the water environment. The seeds, asexual reproductive and sexually reproductive individuals of each endangerd species were transplanted into the abandoned paddy to observe the survival rate and phenological response for 1 year, and then monitored for 2 years. As a result, Hydrophyte 4 taxa (Euryale ferox, Saururus chinensis, Dysophylla yatabeana, Menyanthes trifoliata), Geophyte taxa 1 (Epilobium hirsutum), and Hemicryptophyte taxa 1 (Cicuta virosa) could be introduced into the abandoned paddy. In particular, Euryale ferox, Dysophylla yatabeana, and Menyanthes trifoliata should be introduced into Dum-bung, and Saururus chinensis, Epilobium hirsutum, and Cicuta virosa should be introduced into paddy wetland. Growth of Euryale ferox and Brasenia schreberi was inhibited by herbaceous species, and the growth of Epilobium hirsutum was inhibited by herbivores. Therefore, in order to help efficient settlement of endangered plants introduced in abandoned paddy, it is necessary to remove herbs that inhibit growth and to manage herbivores. In addition, it is necessary to prevent the collapse of paddy bank by planting on the paddy field trees or herbaceous forming vegetation mat. When using abandoned paddy ecologically, it is effective to diversify the moisture environment by creating a Dum-bung to increase biodiversity.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.410-416
• /
• 2006

For highly efficient operation of a Bunsen process section in an iodine-sulfur thermochemical hydrogen production cycle using nuclear heat, the process characteristics of $H_2SO_4-HI-H_2-O-I_2$ mixture system for separating into two liquid phases ($H_2SO_4$-rich phase and $HI_x$-rich phase) and the distribution of $H_2O$ to each phase were investigated.The experiments for process variables were carried out in the temperature range, from 298 to 353 K, and in the $H_2SO_4/HI/H_2O/I_2$ molar ratio of 1/2/14~20/0.5~8.0. As the results, for the $SO_2-I_2-H_2O$ Bunsen reaction system, the ranges between the starting point and the saturation point for two liquid phases separation were determined by calculation. The best result for the minimization of impurities (HI and $I_2$ in $H_2SO_4$ phase and $H_2SO_4$ in $HI_x$ phase) in each phase was obtained in an optimum condition with the highest temperature of 353 K and the highest $I_2$ molar composition. In this condition, the $HI/H_2SO_4$ molar ratio in the $H_2SO_4$-rich phase and the $H_2SO_4/HI_x$ molar ratio in the $HI_x$-rich phase were 0.024 and 0.028, respectively. For the distribution of $H_2O$ to each phase, it is appeared that the affinity between $HI_x$ and $H_2O$ was more superior to that between $H_2SO_4$ and $H_2O$. The affinity between $HI_x$ and $H_2O$ was decreased with increasing temperature but increased with increasing $I_2$ molar composition.

• Clinical and Experimental Pediatrics
• /
• v.50 no.2
• /
• pp.151-156
• /
• 2007

Purpose : Streptococcus pneumoniae is a major etiologic agent for pneumonia, meningitis, otitis media, and sepsis among young children. Multi-drug resistant strains have raised great concern worldwide, thus the importance of prevention with vaccines has been emphasized. However, vaccines may force the appearance of pneumococcal infections by nonvaccine serotypes. Thus, distribution of pneumococcal serotypes should be monitored to estimate vaccine efficacy. We used a new and efficient multibead assay in determining pnemococcal serotypes. Methods : From January to February 2005, 643 children were recruited from ten day care centers to isolate pneumococci from their oropharynx. Pneumococcal serotyping was performed on 62 pneumococcal isolates from 60 children by multibead assay. This immunoassay required two sets of latex particles coated with pneumococcal polysaccharides and serotype-specific antibodies. Twenty four newly developed monoclonal antibodies specific for common serotypes and a pool of polyclonal rabbit sera for some of the less common serotypes were used. Results : The most prevalent pneumococcal serotypes were serotype 6A, 19A, 19F, 23F, and 11A/D/F which accounted more than 50 precent of all the 62 pneumococcal isolates. We found that multibead assay can be performed very rapidly and objectively. Conclusion : This multibead immunoassay was very useful in serotyping clinical isolates of S. pneumoniae because it was simple, reliable and fast.