• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.102-112
• /
• 2013

In this paper, two step processing method of contour extraction and complement which contain hexagonal shape for low contrast and noisy images is proposed. This method is based on the combination of Laplacian-Gaussian filter and an idea of filters which are dependent on the shape. At the first step, an algorithm which has six masks as its extractors to extract the hexagonal edges especially in the corners is used. Here, two tricorn filters are used to detect the tricorn joints of hexagons and other four masks are used to enhance the line segments of hexagonal edges. As a natural image, a corneal endothelial cell image which usually has regular hexagonal form is selected. The edge extraction of hexagonal shapes in corneal endothelial cell is important for clinical diagnosis. The proposed algorithm and other conventional methods are applied to noisy hexagonal images to evaluate each efficiency. As a result, this proposed algorithm shows a robustness against noises and better detection ability in the aspects of the output signal to noise ratio, the edge coincidence ratio and the extraction accuracy factor as compared with other conventional methods. At the second step, the lacking part of the thinned image by an energy minimum algorithm is complemented, and then the area and distribution of cells which give necessary information for medical diagnosis are computed.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.1-10
• /
• 2011

Unfortunately, in current microprocessors, increasing the frequency causes increased power consumption and reduced reliability whereas it improves the performance. To overcome the power and thermal problems in the singlecore processors, multicore processors has been widely used. For 2D multicore processors, interconnection is regarded as one of the major constraints in performance and power efficiency. To reduce the performance degradation and the power consumption in 2D multicore processors, 3D integrated design technique has been studied by many researchers. Compared to 2D multicore processors, 3D multicore processors get the benefits of performance improvement and reduced power consumption by reducing the wire length significantly. However, 3D multicore processors have serious thermal problems due to high power density, resulting in reliability degradation. Detailed thermal analysis for multicore processors can be useful in designing thermal-aware processors. In this paper, we analyze the impact of workload distribution, distance to the heat sink, and number of stacked dies on the processor temperature. We also analyze the effects of the temperature on overall system performance. Especially, this paper presents the guideline for thermal-aware multicore processor design by analyzing the thermal problems in 2D multicore processors and 3D multicore processors.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1017-1023
• /
• 2010

This study investigated the effect of surfactants (nonionic surfactant (Tween 20), biosurfactant) on enhancing transport of bacteria (Bacillus subtilis ATCC 6633) in geological materials. Column experiments were performed under various surfactant conditions with columns packed with quartz sand (particle size distribution: 0.5~2.0 mm, mean diameter: 1.0 mm). Bacterial mass recovery, sticking efficiency, and other parameters were quantified from breakthrough curves. Results indicate that bacterial attachment to sand surfaces increased considerably in the presence of mineral salt medium (MSM), especially at the inlet, which was due to the increase of ionic strength by MSM. It was observed that bacterial transport in sand columns was enhanced in the presence of surfactant. Results also show that simultaneous injection of both surfactant and MSM or pre-injection of surfactant was more effective in bacterial transport enhancement than after-injection of surfactant. This study suggests that transport of bacteria in geological materials could be influenced by surfactants and their injection methods.

• Journal of the Korean Vacuum Society
• /
• v.20 no.2
• /
• pp.77-85
• /
• 2011

The silicon-germanium (SiGe) alloy, which is compatible with silicon semiconductor technology and has a smaller band gap and a lower thermal conductivity than silicon, has been used to fabricate electronic devices such as transistors, photodetectors, solar cells, and thermoelectric devices. This paper reviews the application of SiGe alloys to electronic devices and related technical issues. Since the SiGe alloy comprises germanium whose band gap is smaller than silicon, its band gap is also smaller than that of silicon irrespective of the ratio of silicon to germanium. This narrow band gap of SiGe enables the base thickness of bipolar transistors to decrease without a loss in current gain so that it is possible to improve the speed of bipolar transistors by adopting the SiGe-base. In addition, the conversion efficiency of solar cells is enhanced by the absorption of long-wavelength light in the SiGe absorption layer. Phonon scattering caused by the irregular distribution of alloying elements induces the lower thermal conductivity of SiGe than those of pure silicon and germanium. Because a thin film layer with a low thermal conductivity suppresses thermal conduction through a thermal sink, the SiGe alloy is considered to be a promising material for silicon-based thermoelectric systems.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.39-46
• /
• 2008

Due to the growth in industrialization, potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. There are a number of approaches to in-situ remediation that are used in contaminated sites for removing contaminants. These include soil flushing, dual phase extraction, and soil vapor extraction. Among these techniques, soil flushing was the focus of the investigation in this paper. Incorporated technique with PVDs has been used for dewatering from fine-grained soils for the purpose of ground improvement by means of prefabricated vertical drain systems. The laboratory model tests were performed by using the flushing tracer solutions for silty soils and recorded the tracer concentration changes with the elapsed time and flow rates. The modeling was intended to predict the effectiveness and time dependence of the remediation process. Modeling has been performed on the extraction, considering tracer concentration and laboratory model test characteristics. The computer model used herein are SEEP/W and CTRAN/W, this 2-D finite element program allows for modeling to determine hydraulic head and pore water pressure distribution, efficiency of remediation for the subsurface environment. It is concluded that the coefficient of permeability of contaminated soil is related with vertical velocity and extracted flow rate. The vertical velocity and extracted flow rate have an effect on dispersivity and finally are played an important role in-situ soil remediation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.488-496
• /
• 2018

This study examined the Gangwon Province's current implementation of its elimination of invasive plants and explored a plan to effectively manage invasive plants. The percentage of the distribution of the plants was 39.6% for riverside areas, 23.3% for roadside areas, 12.4% for roadside & riverside areas, and 4.6% for areas around farm land and river banks. To ensure the systematic management of invasive plants, the current study suggests a) developing an invasive plants monitoring and management system; b) reinvigorating the participation of residents, private organizations, and military posts; c) planting of native replacement plants and the conversion of the locations as attractions, and d) nurturing the project for using invasive plants. For policy directions to be pursued based on the results of the study, the following are suggested: a) improving laws and systems regarding invasive plants, b) developing a cooperative system for managing invasive plants, c) implementing the training of civilian professionals, d) implementing the elimination of invasive plants, e) developing replacement plants for cities and counties, f) fostering industries that tap into invasive plants, and g) using the Han River Water System Management Fund for funding and greater efficiency.

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.158-175
• /
• 2022

This study discusses mass unemployment and job insecurity due to the 4th industrial revolution and technological progress. In particular, the construction automation service method can contribute to increasing work productivity, preventing on-site safety accidents, and enhancing the competitiveness of the construction industry according to rapid development and convergence between technologies. However, there is great concern that the position of workers will decrease and the income distribution will deteriorate. Therefore, this study is necessary to alleviate the anxiety of the labor market and to find a direction for the government and all walks of life to ponder. To carry out this study, in-depth interviews were conducted with two experts currently engaged in the construction field, and through analysis, we intend to derive meaning and identify current trends, identify necessary improvement measures and institutional areas and suggest research directions. As a result of the analysis, it is possible to suggest a response strategy in a total of three themes: purpose, implication, and strategy. Based on this, there are response strategies in four areas: (1) industrial site response, (2) worker response, (3) education, and (4) training response, and government and corporate response. Through this study, it is necessary to revitalize economic and sociological discussions in the future so that the improvement in productivity and efficiency of society as a whole due to technological innovation of construction automation services does not lead to social problems such as an increase in the unemployment rate and a decrease in jobs in the labor market.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.697-707
• /
• 2008

The grid-based KIneMatic wave STOrm Runoff Model (KIMSTORM) by Kim (1998) predicts the temporal variation and spatial distribution of overland flow, subsurface flow and stream flow in a watershed. The model programmed with C++ language on Unix operating system adopts single flowpath algorithm for water balance simulation of flow at each grid element. In this study, we attempted to improve the model by converting the code into FORTRAN 90 on MS Windows operating system and named as ModKIMSTORM. The improved functions are the addition of GAML (Green-Ampt & Mein-Larson) infiltration model, control of paddy runoff rate by flow depth and Manning's roughness coefficient, addition of baseflow layer, treatment of both spatial and point rainfall data, development of the pre- and post-processor, and development of automatic model evaluation function using five evaluation criteria (Pearson's coefficient of determination, Nash and Sutcliffe model efficiency, the deviation of runoff volume, relative error of the peak runoff rate, and absolute error of the time to peak runoff). The modified model adopts Shell Sort algorithm to enhance the computational performance. Input data formats are accepted as raster and MS Excel, and model outputs viz. soil moisture, discharge, flow depth and velocity are generated as BSQ, ASCII grid, binary grid and raster formats.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.1-14
• /
• 2017

For the removal of cesium (Cs) from high radioactive/high salt-laden liquid waste, this study synthesized a highly efficient composite adsorbent (potassium cobalt ferrocyanide (PCFC)-loaded chabazite (CHA)) and evaluated its applicability. The composite adsorbent used CHA, which could accommodate Cs as well as other molecules, as a supporting material and was synthesized by immobilizing the PCFC in the pores of CHA through stepwise impregnation/precipitation with $CoCl_2$ and $K_4Fe(CN)_6$ solutions. When CHA, with average particle size of more than $10{\mu}m$, is used in synthesizing the composite adsorbent, the PCFC particles were immobilized in a stable form. Also, the physical stability of the composite adsorbent was improved by optimizing the washing methodology to increase the purity of the composite adsorbent during the synthesis. The composite adsorbent obtained from the optimal synthesis showed a high adsorption rate of Cs in both fresh water (salt-free condition) and seawater (high-salt condition), and had a relatively high value of distribution coefficient (larger than $10^4mL{\cdot}g^{-1}$) regardless of the salt concentration. Therefore, the composite adsorbent synthesized in this study is an optimized material considering both the high selectivity of PCFC on Cs and the physical stability of CHA. It is proved that this composite adsorbent can remove rapidly Cs contained in high radioactive/high salt-laden liquid waste with high efficiency.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1409-1419
• /
• 2008

Inauthentic resources can be easily spread by P2P (Peer-to-Peer) participants due to the openness and anonymity of P2P networks. A possible way to restrict the distribution of inauthentic resources and prevent malicious peers from joining P2P networks is to exploit peers' reputation which reflect their past behaviors and are also helpful to predict peers' future behaviors. There is a possibility that some peers intentionally plays along with other peers in order to increase/decrease its reputation through false feedback exchanges. Therefore, we propose a new reputation management scheme, called TrustRRep (Trustable Resource sharing service using Reputation) scheme, which improves the trustworthiness and efficiency of P2P networks by identifying peers who give false feedback. The TrustRRep scheme is also capable of providing peers with the trustworthiness of shared resources by discriminating resources distributed by malicious peers. We implement the proposed TrustRRep scheme on the NS-2 simulator for evaluating its performance compared to the recent reputation management work available in literature. A case study on simulations shows that the proposed reputation management scheme yields efficient performance in terms of the minimal download ratio and dissemination of inauthentic resources, the efficient identification of peers who give false feedback, and the provisioning of the trustworthiness of peers' reputation. It also shows that the proposed TrustRRep scheme imposes the restrictions of participating P2P networks on a malicious peers by diminishing its trust value.