• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1210-1213
• /
• 2018

In this paper, we propose a method to reduce the amount of current through the Timing Control of the duty cycle and the Report Attribute Control at the MAC Layer in consideration of the Sleep Mode under the IoT wireless environment. The use of a duty cycle is an effective way to reduce energy consumption on wireless sensor networks where the node is placed in sleep mode periodically. In particular, we studied how to control power efficiency through duty rate in Short Transition Time and ACK Time processing while satisfying radio channel limitation criterion. When comparing before and after the improvement considering the delay time constraint, we validated the correlation of the electrical current reduction.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.31 no.7
• /
• pp.25-30
• /
• 1982

This paper considered the energy saving problem of D.C. motor in arbitrary load condition. We can improve efficiency by maintaining the proper ratio of armature current/field current. First, the condition of maximizing the efficiency was obtained, and then the real time control was implemented by using microprocessors. As a result, the efficiency was improved in spite of constant output. For example, the efficiency at 1/5 load was improved from 56.7% to 80%.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.5
• /
• pp.1267-1271
• /
• 2005

To investigate the effect of the frequently used anti-obese medicine GyeongshinhaeGihwan 1 (GGT1), in food intake, body weight and food efficiency ratio for high fat diet induced obese male rats. Also, to value the diffences between GyeogshinhaeGihwan 1 and FDA approved Sibutramine in anti-obesity effect. High fat diet induced obese male rats were classified into four groups - positive control group, negative control group, GyeongshinhaeGihwan 1 group and Sibutramine group - and their food intake and body weight were observed for eight weeks. Anti-obesity effect was estimated with food efficiency ratio which is calculated by weight inclose divided by food intake. The result shown in Fig. 2 suggests that the GyeongshinhaeGihwan 1 group is more effective on food intake control than the Sibutramine group. Average weight variation shows an increase in both positive/negative control group and medication group. Also, the result in Fig. 3 indicates that average food efficiency ratio decreases contrary to the average weight variation. In addition, repeatedly estimated variance analysis on average food efficiency ratio of the GyeonushinhaeGihwan 1 group shows (1) the result corollary to the time of observation of food efficiency ratio was effective under 0.05 variance (P-value 0.000). The differences between each groups were not shown under 0.05 variance. Compared to the control group, medication groups were visually more effective on food intake control. Although both groups had a tendency of weight increasing, food efficiency ratio considering food intake and weight variation rate showed a decrease. Especially, the medication group variated less than the control group corollary to the point of time, proving the individuals react less sensitive to the medicine. Moreover, there were no differences in the anti-obesity effect between GyeongshinhaeGihwan 1 group and Sibutramine group studied by repeatedly estimating variance analysis(P-value: 0.610). When considering Sibutramine as an anti-obesity medicine approved by FDA, the point of being classifed in the same group proves the effect of GyeongshinhaeGihwan 1 as an anti-obesity medicine.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.671-678
• /
• 2009

This paper presents target operation voltage guidelines of each voltage control area considering both voltage stability and economical efficiency in real power system. EMS(Energy Management System) data, Real-time simulator, shows not only voltage level but lots of information about real power system. Also this paper performs optimal power flow calculation of three objective functions to propose the best target operation voltage. objective function of interchange power flow maximum and active power loss minimization stand for economical efficiency index and reactive power reserve maximum objective unction represents stability index. Then through simulation result using optimazation technique, the most effective objective function is chosen. To sum up, this paper divides voltage control area into twelve considering electric distance characteristics and estimate or voltage level by the passage of time of EMS peak data. And through optimization technique target operation voltage of each voltage control area is estimated and compare heir result. Then it is proposed that the best scenario to keep up voltage stability and maximize economical efficiency in real power system.

• Journal of Aquaculture
• /
• v.12 no.3
• /
• pp.205-212
• /
• 1999

A feeding trial was conducted to evaluate dietary protein sources replacing fish meal for parrot fish, Oplegnathus fasciatus. A control diet with white fish meal as a protein source was included. White fish meal in the isonitrogenous diet was replaced with each of 22% meat meal, 17% blood meal, or 31% soybean meal. Triplicate groups of 25 fish initially averaging 26 g were fed four experimental diets for 7 weeks in a flow-through tank system. Weight agin and feed efficiency in fish fed diet containing 17% blood meal (this diet also contained 45% white fish meal) were not significantly different from those in fish fed the control diet (P>0.05). Fish fed diet containing 22% meat meal had lower weight gain and feel efficiency than those of fish fed the control diet (P<0.05). weight gain of fish fed diet containing 31% soybean meal was not different from that of fish fed the control diet, but feed efficiency of fish fed the diet was lower than that of fish fed the control diet.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.1
• /
• pp.20-29
• /
• 2005

This paper presents an implementation of efficiency optimization of reluctance synchronous motor (RSM) using a neural network (NN) with a direct torque control (DTC). The equipment circuit considered with iron losses in RSM is analyzed theoretically, and the optimal current ratio between torque current and exiting current component are derived analytically. For the RSM driver, torque dynamic can be maintained with DTC using TMS320F2812 DSP Controller even with controlling the flux level because a torque is directly proportional to the stator current unlike induction motor. In order to drive RSM at maximum efficiency and good dynamics response, the Backpropagation Neural Network is adapted. The experimental results are presented to validate the applicability of the proposed method. The developed control system show high efficiency and good dynamic response features with 1.0 [kW] RSM having 2.57 inductance ratio of d/q.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.522-525
• /
• 1999

This paper describes a simple but effective method for energy saving of ac motors having a widely variable load. The proposed method is based on an optimal efficiency control which is operated by voltage-current pattern such as to maintain the maximum efficiency on the efficiency-output characteristics of the motor, in voltage control with triac. In this paper, authors present the experimental results of the SPIM under controlling of current of main and auxiliary winding by using a one chip microcontroller. Experiments are focused on a capacitor stating single phase induction motor the optimal energy saving are proved by the proposed method.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.601-602
• /
• 2008

This paper presents pulse-frequency modulation(PFM) to improve the light-load efficiency. The proposed circuit is designed by using the device parameter of standard $0.13{\mu}m$ CMOS process. The performance of proposed circuit is evaluated by HSPICE simulation Measured efficiency in a light-load is measured 78-90 % for 0.1 to 100mA output current.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.9
• /
• pp.431-436
• /
• 2005

This paper studies a novel boost DC-DC converter operated high efficiency for discontinuous current mode (DCM) control. The converter worked in DCM eliminates the complicated circuit control requirement, reduces a number of components, and reduces the used reactive components size. In the general DCM converter, the switching devices are turned-on the zero current switching (ZCS), and the switching devices must be switched-off at a maximum reactor current. To achieve the zero voltage switching (ZVS) at the switching turn-off, the proposed converter is constructed by using a new loss-less snubber circuit. Soft-switched operation of the proposed boost converter is verified by digital simulation and experimental results. A new boost converter achieves the soft-switching for all switching devices without increasing their voltage and current stresses. The result is that the switching loss is very low and the efficiency of boost DC-DC converter is high.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.626-633
• /
• 2011

This paper presents a novel maximum efficiency control scheme for convergence improvement in stator-flux-oriented induction motor drives. Three input powers are calculated at three different flux levels, respectively. A quadratic curve is obtained using the quadratic interpolation method using the three points. The flux level at the lowest point of the interpolated curve is calculated, which is not the real minimum input power of the motor, but an estimated one. Hence, the quadratic interpolations are repeated with three new points chosen using the selection method for new points for refitting until the convergence criteria are satisfied. The proposed method is verified by simulation results.