• 전기학회논문지
• /
• 제67권12호
• /
• pp.1602-1610
• /
• 2018

Induction heating can convert electrical energy to thermal energy with high conversion efficiency and quick heating. Currently, a current source rectifier/inverter-fed parallel resonant circuit is widely used as an induction heating power supply for forging applications. However, the conventional induction heating power supplies composed of phase-controlled rectifier and SCR inverter have low efficiency and low power factor at input side, and require additional starting circuitry. So this paper proposes new induction heating power supply topologies for forging applications which have high power factor, high efficiency, and large output power. It also suggests detailed design guideline.

• 유기물자원화
• /
• 제27권2호
• /
• pp.67-73
• /
• 2019

본 연구에서는 유기성폐자원의 바이오가스 생산 및 이용을 최적화를 위해 현장시설의 정밀모니터링과 시설별 에너지수지를 분석하고, 현장문제 해결방안에 대해서 조사하여 전처리시설 및 발전기 등의 설계 및 운전 가이드라인을 제시하였다. 고품질화 정제설비 운영에 잦은 고장 및 효율 저하를 해결하기 위해서는 가스전처리가 필요하며, 탈황, 제습, 탈실록산, 분진 처리, 휘발성유기화합물 등의 처리공정이 있다. 이 공정들은 고품질화 공정에서도 제거되는 물질들이기에 가스 전처리에서는 정량적 가이드라인은 제시하지 않고, 정성적 가이드라인으로 처리공간에 운영하도록 제시하였다. 특히, 분진, 실록산 및 휘발성유기화합물 등은 가스 전처리에서 제거되지 않으면 고품질화 공정의 잦은 고장의 주원인이된다. 바이오가스 고품질화 공정에 대한 설계 운전 가이드라인은 전체 가스 발생량의 90 % 이상 이용, 2계열화, 여유율 10 % 이상 감안 등이 있으며, 품질기준[메탄함량(프로판 포함) 95 % 이상]을 제시함. 또한 균등한 바이오가스 유입을 위해 가스균등조 설치, 보조연료 균등투입 제어를 위한 열량자동조절장치 설치, 가스압축과정에서 다량 발생하는 수분 제거를 위한 고품질화 후단의 제습장치 설치, 겨울철 설비의 결빙 및 효율 저하 방지를 위한 보온설비 설치, 특히 멤브레인 설비는 실내 설치 등을 제시하였다.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.328-332
• /
• 2008

This research was about T-N removal efficiency of oxic reactor in which fixed media submerged from Membrane BNR(An+Ax+Ox) process. This experiment was implemented by using fixed media and changing DO concentration in the oxic reactor. Nitrification efficiencies of all modes were more than 98%. When no media was in the oxic reactor, T-N removal efficiency was only 47.4%, while it were shown from 60.3% to 67.4% with packed media, which indicated improved efficiency of 27~42%. The removal efficiencies of TCOD and BOD were more than 89%, 98% respectively, which could satisfy the guideline of advanced sewage reclamation by Department of Environment. When DO concentration in the packed oxic-media tank was 0.5~1.0 mg/L, T-N removal efficiency was low, which resulted from insufficient nitrification in the oxic reactor. Therefore, DO concentration of bulk solution needs to be kept more than 1.0 mg/L to induce higher nitrification efficiency in the reactor in which media was submerged. Also, the selection of DO concentration is important to prevent media from being clogged.

• 한국환경복원기술학회지
• /
• 제9권5호
• /
• pp.1-9
• /
• 2006

The purpose of this study is to make a design guideline in designing constructed wetland which can treat water quality both of point and nonpoint source water pollution. It focuses on structural aspects of two case studies of constructed wetland applying SSB(Sustainable Structured wetland Biotope) system in Korea. The constructed wetland of Lake Ju-am which was constructed in 2002 by Environmental Management Corporation, was designed by applying SSB system. It shows higher removal efficiency than expected - 56% of BOD removal efficiency, 60% of T-N removal, and 76% of T-P removal efficiency. In two cases, total wetland areal extents were calculated referred to treatment efficiency. The system is consist of micro-cell structures : inflow channel, forebay, multiple wetland cells and micro-pool. When designing constructed wetland appropriate in local area, the total organic system of vertical and horizontal structure : geology, hydrology, land use, and ecological surroundings of the sites should be considered totally.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.267-270
• /
• 2000

The feasibility of small linear antenna for near range wireless communications was studied. The requirement of the system are frequency range 9∼12 MHz and antenna size 15 cm. The communication range is about 15 m. The antenna input impedance is very small radiation resistance and very large capacitive reactance. The lossless impedance matching is nearly impossible, therefore lossy matching is considered. The antenna has very low radiation efficiency. The near field calculation has a large uncertainty, but the results can be used as the guideline of a small linear antenna system for a near range wireless communication.

• 한국전자거래학회지
• /
• 제26권2호
• /
• pp.45-59
• /
• 2021

4차 산업혁명의 핵심 동인으로서 Software(이하 SW)의 중요성이 더욱 커짐에 따라, 정부는 국가 경쟁력 강화를 위해 SW R&D 투자를 늘리고 SW 관련 정책을 지속적으로 수립하고 있다. 하지만 SW 연구개발에 대한 정부의 지속적인 투자에 비해, SW 연구개발 투자성과에 대한 체계적 분석은 부족한 실정이다. 본 연구에서는 Data Envelopment Analysis(DEA) 기법을 이용하여 SW 국가연구개발 사업의 분야별 효율성을 분석하였다. 2008년~2018년까지 정보통신산업진흥원(NIPA)에서 수행된 1,463개 과제정보를 토대로 효율성을 정태적/동태적 관점에서 측정하였다. 정태적 관점의 규모효율성 측정을 통해 비효율성 원인을 규모와 기술문제로 분석하였다. DEA/Window 모형을 이용한 동태적 효율성 분석 결과를 제시하고 효율성-안정성 매트릭스를 이용해 분야별 대응 모델을 제시하였다. 본 연구는 SW 국가연구 개발사업 전체를 대상으로 효율성 분석을 수행했다는 점에 의의가 있으며, 정태적/동태적 효율성 분석결과는 향후 SW 국가연구개발사업 기획 시 기초자료로 활용이 가능할 것으로 기대된다.

• 지능정보연구
• /
• 제7권1호
• /
• pp.63-79
• /
• 2001

비모수적인 효율성 분석기법인 자료봉합분석(Data Envelopment Analysis) 은 현재 학교, 은행, 병원 등 여러 분야에서 각 조직의 효율성을 평가하는데 응용되고 있다. 그러나, 방법론 적용에 있어 상대적으로 비효율적인 의사결정단위의 참조집합이 1개 이상의 효율적인 의사결정단위로 구성되어 있어, 어느 방향으로 개선해야 할지 가이드라인을 제공하지 못하고 또한 효율성 크기에 따라, 비효율적인 의사결정단위의 단계적인 개선 방향을 제공하지 못한다는 불편한 점이 있다. 따라서, 본 연구에서는 이와 같은 불편한 점을 보완하기 위한 자료봉합분석과 기계학습을 이용한 하이브리드 방법론을 개발하고, 이를 국내 29개 생명보험사에 적용하여 타당성을 검증하였다.

• 품질경영학회지
• /
• 제37권4호
• /
• pp.61-70
• /
• 2009

This paper introduces quantitative tools for evaluating the relative efficiency of Career & Counseling Jobs in universities. As tools, it uses Data Envelopment Analysis (DEA) developed by Charnes and Cooper. It finally selects 29 DMUs which are listed on the Ministry Of Education, Science And Technology(http://academyinfo.go.kr). We measures the technical efficiency of each DMU with the use of DEA-CRS, rather then DEA-VRS because DEA-CRS not only compares relative efficiencies but also implicitly considers economies of scale based on the assumption of linearity. We run a linear programming model Frontier Analyst Program for the estimation of the relative efficiencies of each DMU. The model also indicates the precise amount of inefficiencies for each input, which mean how much inputs are wasted for a given output and how much the university is inefficiently operated. This analysis helps to give guideline for the organization to construct a futureoriented operational strategy and also to show clear picture of contents of mismanagement for the past. The details of mismanagement are to be identified, analysed and finally corrected.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.75-79
• /
• 2002

In this research, a design guideline of current generating rotor and acceptable field rotor in offshore environment is proposed. To design rotor model, wind mill rotor design principles and turbine theories were applied based on a field rotor experimental data. To verify the compatibility of the rotor design method and to analyze the properties of design factors, 3 rotor models were designed and experimented in a circular water channel. Three rotor models were designed according to different blade numbers and blade shapes. With various flow velocities and rotor rpm, the rotor power and efficiency were measured and the properties of rotor were estimated. The results can be effectively applied to the design of current generation rotor.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1001-1006
• /
• 2004

Selection of optimal railway line is taken into consideration include of the purpose of railway, geographical features and facility of management. This study performed opinions of specialists, checking of industrial environment, analysis of bid guideline to select the optimal line and executed AHP method to make quality model and choose weight factors. Therefore, this study executed about six categories which are the efficiency of transportation, facility of planning and construction, economical efficiency, coincidency of planning, the civil appeal and environmental standards, connection with system, and indicated the differences of other method by analyze into specific factors of each categories.