• 핵의학기술
• /
• 제21권2호
• /
• pp.13-27
• /
• 2017

국내 의료용 방사성폐기물 자체처분과 관련하여 심사과정에서 많은 보완을 거치게 되고, 이 과정을 통과함에 많은 어려움을 겪고 있다. 이에 따라 의료용 방사성폐기물의 자체처분시 기본적인 가이드라인을 제시함으로써 의료기관의 방사성 폐기물 처리효율을 높이고자 한다. 2015년부터 2016년까지 국내 15개 의료기관의 의료용 방사성폐기물 자체처분 절차서 및 계획서 작성 시 보완 요청된 사항들을 비교 검토하였으며, 이와 관련하여 원자력 안전법 관련 규정을 기준으로 방사성폐기물 자체처분 시 서류작성에 필요한 세부 작성안 들을 도출하였다. 한국원자력안전기술원의 대표적인 보완요청사항들로는 비가연성 폐기물의 처분방법, 자체처분 예정 폐기물의 저장방법, 폐기물 자체처분의 정당성 및 자체처분 전 조치사항, 배기필터의 기준방사능 및 보관기간 산출, 폐기물 수량 측정 용기 보유 여부 및 증빙자료, 감마카운터 사용 시 측정효율 증명자료 첨부임을 확인할 수 있었다. 또한 의료 방사성 폐기물 자체처분 가이드라인 구축을 통해 방사성동위원소 핵종 및 발생유형별 분류기준 등을 명확히 제시하였다. 이를 통해, 자체처분 서류 작성에 따른 시간의 단축과 업무대행 지출비용이 발생되지 않음을 확인할 수 있었고 방사성 폐기물의 장기간 보관에 따른 보관시설의 저장효율이 좋아지고 경제적 비용도 절감됨을 알 수 있었다. 본 가이드라인을 바탕으로 방사성폐기물 자체처분의 실무적인 어려움을 겪고 있는 관계자들의 업무효율 향상에 기여할 것으로 사료된다.

• 한국건설관리학회논문집
• /
• 제10권4호
• /
• pp.58-66
• /
• 2009

최근 BIM 패러다임은 건설산업의 작업의 생산성, 효율성 및 협업을 높일 수 있는 모멘텀으로 인식되고 있으며, 주요 선진 국가들은 IFC기반 BIM으로 불리는 개방형 BIM(Open BIM)을 도입 및 적용하기 위한 선결요건으로 지침을 개발하고 이를 적용하고 있다. 반면, 국내 건설업계에서 BIM의 도입 및 적용은 초기단계에 머물러 있으며, 주로 민간사 위주로 추진되고 있다. 최근 들어 공공발주 BIM의 도입 및 적용은 대한주택공사, 행정복합도시건설청, 정부 등을 중심으로 추진되고 있으나, BIM에 관련된 제반적 요건을 마련하지 못한 관계로 적극적인 활용은 이루어지지 못하는 상황이다. 이는 BIM의 도입 및 적용을 위한 지침의 부재가 중요한 원인이 되고 있다. 이러한 관점에서 본 연구는 국외 지침의 경향을 분석하고, 국내 지침의 개발을 위해 필요한 전략적 방향을 도출하고자 한다.

• 임상간호연구
• /
• 제26권1호
• /
• pp.10-25
• /
• 2020

Purpose: The purpose of this study was to update the previously developed nursing practice guideline for enteral nutrition (EN). Methods: The guideline update was done in 22 steps using standardized methodology for nursing practice guidelines. Results: The updated EN guideline consisted of 16 domains and 228 recommendations. The domains and number of recommendations in each domain were for IDSA (Infectious Diseases Society of America): 8 on general instruction, 9 on general instruction for special nutrition, 9 on general instruction for EN, 3 on assessment of EN, 10 on access to EN, 18 on EN device insertion, 16 on selection and preparation of nutritional supplements, 46 on administration and stopping EN, 22 on maintenance and management of EN, 9 on monitoring EN, 16 on prevention and management of complications of EN, 18 on medication administration, 20 on EN in various situations, 20 on prevention of errors, 1 on nursing education, and 3 on nursing documentation. For the levels of evidence, there were 9.7% for level I, 13.1% for level II, 62.5% for level III and 1.1% for GRADE (Grading of Recommendations Assessment, Development and Evaluation): 3.3% for low, 0.8% for moderate, 9.3% for very low. A total of 133 recommendations were newly developed and 10 previous recommendations were modified. Conclusion: This updated EN nursing practice guideline can be used to enhance evidence-based practice in fundamentals of nursing practice and it should be disseminated to nurses nationwide in order to improve the efficiency of EN practice.

• 경영과학
• /
• 제26권1호
• /
• pp.127-136
• /
• 2009

This paper purposes analyzing how task assignments influence on business process efficiency, and improving business process efficiency in Business Process Management (BPM) environments. For this purpose, task assignment is categorized into dynamic assignment and static assignment. Dynamic assignment binds a user to a task at process run-time, whereas static assignments assigns a task to a user at process build-time. So far, the influence of task assignment methods has not been studied. We, in this paper, analyze the business process efficiency using two different assigning rule, in terms of cycle time as a efficiency measure. The comparison result can provide a guideline for a company who wants to employ commercial BPM systems.

• 한국실내디자인학회논문집
• /
• 제14권3호
• /
• pp.46-54
• /
• 2005

This study explored how the elementary schools provided proper interior environments to the students in terms of ecological aspects. 14 cases-7 in Busan and 7 in Osaka which were newly built or remodelled since 2000 were selected. These schools were analyzed based on the eco-school guideline suggested In the former study. The guideline categorizes into three parts: 1) energy efficiency related with lighting, ventilation, heating and insulation, 2) greening, 3) sustainability including recycling water system and use of environmentally friendly materials. The results showed that Korean schools require more systematic planning for natural lighting, ventilation, Insulation, greening and new water system while Japanese schools need use of environmentally friendly materials and consideration for natural lighting, insulation and interior greening. Especially, natural lighting and natural ventilation through roof window, atrium, wind tower and use of natural insulation and blind window system should be basically considered at the Initial planning. Also, this study reveals that ecological approach including greening and natural lighting with various architectural form should be applied in future elementary school design to make the school environment more agreeable and economical.

• 디지털산업정보학회논문지
• /
• 제15권1호
• /
• pp.9-20
• /
• 2019

Korea's R&D investment has significantly increased in recent years. However, the efficiency of R&D investment is still in question. In order to examine the ways to improve the efficiency of R&D investment, this paper presents dynamic analysis on both quantitative and qualitative efficiency of R&D projects. A Data Envelopment Analysis(DEA)/Window method is used to analyze static and dynamic efficiencies of Industrial Material R&D projects in Korea from 2012 to 2016. As a result, statistically significant differences between quantitative and qualitative efficiency have been found. It has been observed that characteristics of Decision Making Units(DMUs) have an impact on both static and dynamic efficiencies. In particular, textile and ceramic projects showed relatively stable qualitative efficiency for a short-term perspective, while steel and chemical projects showed such stability for a long-term perspective. Among the types of project principals, universities showed relatively stable efficiency, compared with private sectors and research institutes. The results of this paper can be used as a guideline to manage the performance and stability of R&D projects' efficiency.

• 임상간호연구
• /
• 제19권1호
• /
• pp.128-142
• /
• 2013

Purpose: This study was conducted to adapt the previously developed intravenous infusion guidelines with good quality for development of the evidence-based intravenous infusion nursing practice guideline in Korea. Methods: Guideline adaptation process was conducted according to guideline adaptation manual version 2.0 developed by NECA (Kim, Kim et al., 2011) which consisted of three main phases, 9 modules including a total of 24 steps. Results: Adapted intravenous infusion nursing practice guideline was consisted of 19 domains and 180 recommendations. The domains and number of recommendations in each domain were: general guide, 4; assessment, 1; vascular access device selection, 4;site selection, 14;site preparation, 5;site care, 29; maintaining patency, 11; blood sampling via vascular access, 4; vascular access device exchange and removal, 9; add-on device selection, 27; infusion related complications, 63; education, 7; and documentation and report, 2. There were 11.9% of A, 28.4% of B, 58.7% of C in grade of recommendations. Conclusion: Adapted intravenous infusion nursing practice guideline is expected to contribute providing an evidence based practice guides for intravenous infusion. The guideline is recommended to be disseminated to nurses nationwide to improve the efficiency of intravenous infusion practice.

• 한국산업보건학회지
• /
• 제20권2호
• /
• pp.131-138
• /
• 2010

This technical report was developed to suggest the guideline to assess the safe use and handling metalworking fluids (MWFs) in machining operation. The basis of this method developed in this study was based on self assessment procedure recommended by Organization Resources Counselors (ORC) of the United States (US). In addition, various MWF management elements obtained from the review on various articles, reports and author's experience regarding MWF were newly added to the evaluation guideline. A total of four areas were finally selected in order to control exposure to MWF used in machining operations. They are all related to the presence and efficiency of the control measures, exposure assessment, management on tank and sump, and safe treatment of chips and metal fines generated during machining operations. Each area is consisted of several related elements. Several evaluation areas and elements used in this study could be revised, replaced, added and deleted according to the process environment, evaluation objectives and evaluator's (manager) criteria etc. This evaluation guide manual could be used for safe management of MWF in metalworking operation. In addition, industrial hygienists can use this evaluation method for auditing and evaluating the management status on MWF.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권3호
• /
• pp.25-42
• /
• 2018

Purpose The purpose of this study focused on adopting production systems in cognitive psychology to improve the extraction process of persuasive design characteristics for healthcare-related mobile applications. Design/Methodology/Approach A research approach with four stages was developed. We developed and updated the evaluation guideline for persuasive design characteristics (PDC). We tried to summarize and analyze each of 28 PDC and prepared related production rules. Verification process for both guideline approach and production system approach were performed. Top one hundred apps from both medical category and health and Fitness category were selected and evaluated by two approaches. By comparing the results of the two approaches, we tried to explain the improvement and reliability of introducing the production system in the PDC extraction process. Findings Based on the updated guideline for healthcare-related mobile applications, a production system in cognitive psychology was developed. By comparing the PDC extraction results by two approaches, production system showed a better improvement for evaluation precision and efficiency for decision-making process. The findings of this study can be used for researchers and app developers to apply production system to analyze, evaluate, and develop better healthcare-related apps with persuasion.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1676-1681
• /
• 2003

The attachment of mobile vehicle is necessary for the automated operation on the inclined or vertical walls of steel structures. Since the vehicle requires attaching devices additionally, its overall efficiency can be reduced by the devices. Therefore, external shapes of mobile vehicles have to be researched to give the effective movement on the vertical face. For the design of mobile vehicle, the guideline has been derived from the modeling of wall-climbing, so that the vehicle should have a specific external shape for vertical movement due to the gravitational force. Hence, some adequate arrangement of attaching device to the mobile vehicle has been presented for the effective movement. In the experiments with four permanent magnetic wheels, a plausible result was achieved as a vertical attaching force of 185.2(N), a friction force of 153.8(N) and a curvature radius of 1.4m. The mobile vehicle should be modified according to the proposed design guideline. and then it could be applied to a specific operation as an appropriate external shape. Also, Further research is recommended on an optimal posture and a moving method in a specific application. as the attaching force ortho vehicle can be affected by its posture.