• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.45-56
• /
• 1983

The purpose of this experiment was to evaluate the effect of the drum structures and crop moisture contents on the performance of newly developed throw-in type axial thersher. Sachun No.2 malting barley with four different crop moisture levels was used as the testing material. Four different types of threshing drum; the cylindrical drum-equipped with teeth or rubber bars and the conical drum-equipped with teeth or rubber bars were tested. The results are summarized as follows; 1. The threshing efficiency of cylindrical drum was higher than that of the conical one, and the drum with teeth was more effective in threshing than the one with bars. However, the higher the threshing efficiency over the whole range of moisture levels and drum speeds given, the more the rapid and unexpectable variations in threshing efficiencies 2. The separation efficiency of the conical drum was decreased as drum speed was increased and was not so much influenced as crop moisture content. But in case of the cylindrical drum, the result was shown in opposite way to that of the conical one. The separation efficiency of the drum with teeth was higher than that of the drum with bars and no significant decrease in separating efficiency was found at wet crop condition. 3. Foreign matters other than grain passing through the concave sieve was decreased as crop moisture content was increased, and the purity was increased at middle range of drum speed regardless of drum types. 4. Minimum grain loss was found at 700 rpm to 800 rpm of drum speed for all types of drums. The effect of crop moisture content on total grain loss was varied with drum types. As far as the grain loss is concerned, the conical drum having teeth was not so greatly influenced by various crop moisture contents and drum speeds as compared with the other types of drum. 5. Generally, the crop moisture content has more relevant effect on the germination than the drum speed regardless of drum types. The germination percentage of grain threshed by the conical drum and the bar attached drum were higher than those of cylindrical one and teeth attached one, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.67-67
• /
• 2008

Application of organic materials with low cost, easy fabrication and advantages of flexible device are increasing attention by research work. Recently, one of them, organic solar cells were rapidly increased efficiency with regioregular poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyricacidmethylester (PCBM) used typical material. To increased efficiency of organic solar cell has tried control of domain of PCBM and crystallite of P3HT by thermal annealing and solvent vapor annealing. [4-6] In those annealing effects, be made inefficiently efficiency, which is increased fill factor (FF), and current density by phase-separated morphology with blended P3HT and PCBM. In addition, increased conductivity by modified hole transfer layer (HTL) such as Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS), increased both optical and conducting effect by titanium oxide (TiOx), and changed cathode material for control work function were increased efficiency of Organic solar cell. In this study, we had described effect of organic photovoltaics by conductivity of interlayer such as PEDOT:PSS and TCO (Transparent conducting oxide) such as ITO, which is used P3HT and PCBM. And, we have measured with exactly defined shadow mask to study effect of solar cell efficiency according to conductivity of hole transfer layer.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.3
• /
• pp.197-205
• /
• 2017

Lead dioxide thin films were electrodeposited on nickel substrate from acidic lead nitrate solution. Current efficiency and thickness measurements, cyclic voltammetry, AFM, SEM, and X-ray diffraction experiments were conducted on $PbO_2$ surface to elucidate the effect of lead nitrate concentration, current density, temperature on the morphology, chemical behavior, and crystal structure. Experimental results showed that deposition efficiency was affected by the current density and solution concentration. The film thickness was independent of current density when deposition from high $Pb(NO_3)_2$ concentration, while it decreased for low concentration and high current density deposition. On the other hand, deposition temperature had negative effect on current efficiency more for lower current density deposition. Cyclic voltammetric study revealed that comparatively more ${\beta}-PbO_2$ produced compact deposits when deposition was carried out from high $Pb(NO_3)_2$ concentration. Such compact films gave lower charge discharge current density during cycling. SEM and AFM studies showed that deposition of regular-size sharp-edge grains occurred for all deposition conditions. The grain size for high temperature and low concentration $Pb(NO_3)_2$ deposition was bigger than from low temperature and high concentration deposition conditions. While cycling converted all grains into loosely adhered flappy deposit with numerous pores. X-ray diffraction measurement indicates that high concentration, high temperature, and high current density favored ${\beta}-PbO_2$ deposition while ${\alpha}-PbO_2$ converted to ${\beta}-PbO_2$ together with some unconverted $PbSO_4$ during cycling in $H_2SO_4$.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.324-335
• /
• 2020

This study sought to find out the impact of a university student's parental love on their career maturity and the effect of adjusting their career-setting self-efficiency and cognitive flexibility in their relationship. For this purpose, 362 college students in Daejeon, Chungnam, and Seoul were analyzed, there were significant differences between parental attachment and career-setting self-efficiency depending on gender, according to the study. Second, career-setting self-efficiency had a significant impact on career maturity. Third, the effect of controlling cognitive flexibility and career-setting self-efficiency was seen between parental affections and career maturity. This shows that parents attachment may have different effects on university students' career maturity, depending on the degree of career-setting self-efficiency, cognitive flexibility in the process of parental affection affecting the university students' career maturity. Therefore, it can be used to develop various programs that can help individuals decide their career path with recognizing that there are different internal factors within the university student group.

• Geomechanics and Engineering
• /
• v.10 no.3
• /
• pp.335-355
• /
• 2016

Most laboratory test research has focused on grouting efficiency in homogeneous reconstituted soft clay. However, the natural sedimentary soils generally behave differently from reconstituted soils due to the effect of soil structure. A series of laboratory grouting tests were conducted to research the effect of soil structure on the performance of compensation grouting. The effects of grouting volume, overlying load and grouting location on the performance of compensation grouting under different soil structures were also studied. Reconstituted soil was altered with added cement to simulate artificial structured soil. The results showed that the final grouting efficiency was positive and significantly increased with the increase of stress ratio within a certain range when grouting in normally consolidated structured clay. However, in the same low yield stress situation, the artificial structured soil had a lower final grouting efficiency than the overconsolidated reconstituted soil. The larger of normalized grouting volume could increase the final grouting efficiency for both reconstituted and artificial structured soils. Whereas, the effect of the overlying load on final grouting efficiencies was unfavourable, and was independent of the stress ratio. As for the layered soil specimens, grouting in the artificial structured soil layer was the most efficient. In addition, the peak grouting pressure was affected by the stress ratio and the overlying load, and it could be predicted with an empirical equation when the overlying load was less than the yield stress. The end time of primary consolidation and the proportion of secondary consolidation settlement varied with the different soil structures, grouting volumes, overlying loads and grouting locations.

• Fisheries and Aquatic Sciences
• /
• v.20 no.5
• /
• pp.7.1-7.6
• /
• 2017

A feeding trial was designed to assess the effects of dietary protein and lipid content on growth, feed utilization efficiency, and muscle proximate composition of juvenile mandarin fish, Siniperca scherzeri. Six experimental diets were formulated with a combination of three protein (35, 45, and 55%) and two dietary lipid levels (7 and 14%). Each diet was fed to triplicate groups of fish ($8.3{\pm}0.1g$) to apparent satiation for 8 weeks. The results showed that growth performance in terms of weight gain (WG) and specific growth rate (SGR) increased with increasing dietary protein level from 35 to 55% at the same dietary lipid level. At the same dietary lipid content, WG and SGR obtained with diets containing 55% protein was significantly higher than those obtained with diets containing 45 and 35% protein. No significant effect on growth rate was found when the dietary level of lipid was increased from 7 to 14%. While the levels of protein and lipid in the diets had no significant effect on feed intake, other nutrient utilization efficiency parameters including daily protein intake (DPI), feed efficiency (FE), and protein efficiency ratio (PER) showed a similar trend to that of growth rates, with the highest values obtained with diets containing 55% protein. Muscle chemical composition was not significantly affected by the different dietary treatments for each dietary lipid or protein level tested. These findings may suggest that a practical diet containing 55% protein and 7% lipid provides sufficient nutrient and energy to support the acceptable growth rates and nutrient utilization of mandarin fish juveniles.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.389-396
• /
• 2019

The electrical energy consumption (EEC) in removal of NO by a $UV/H_2O_2$ oxidation process was introduced and related to removal efficiency of this gas. The absorption-reaction of NO was conducted in a bubble column reactor in the presence of $SO_2$. The variation in NO removal efficiency was investigated for various process parameters including NO and $SO_2$ inlet concentrations, initial concentration of $H_2O_2$ solution and gas flow rate. EEC values were obtained in these different conditions. The removal efficiency was increased from about 22% to 54.7% when $H_2O_2$ concentration increased from 0.1 to 1.5 M, while EEC decreased by about 70%. However, further increase in $H_2O_2$ concentration, from 1.5 to 2, had no significant effect on NO absorption and EEC. An increase in NO inlet concentration, from 200 to 500 ppm, decreased its removal efficiency by about 10%. However, EEC increased from $2.9{\times}10^{-2}$ to $3.9{\times}10^{-2}kWh/m^3$. Results also revealed that the presence of $SO_2$ had negative effect on NO removal percentage and EEC values. Some experiments were conducted to investigate the effect of $H_2O_2$ solution pH. The changing of pH of oxidation-absorption medium in the ranges between 3 to 10, had positive and negative effects on removal efficiency depending on pH value.

• Asia pacific journal of information systems
• /
• v.11 no.1
• /
• pp.75-90
• /
• 2001

Computer-based systems operating between two or more co-operating organizations as part of their business relationship are generally referred to as inter-organizational systems(IOS). IOS automates aspects of transactional work between organizations and coordinate other activities. These systems facilitate organizational interaction as well as flows of materials, services and information. This planning provides as business direction for IOS applications, coordinates the efforts of participants, and deals with technical and non-technical IOS issues. This paper seeks to research the effect of strategic determinants of IOS to the efficiency of IOS. The determinants that selected from prior researches are top management support, is support and vendor/consultant support. The results show that the effect of top management support to efficiency of IOS was significant and this effect mediates the effect of other factors.

• Journal of the Korean Home Economics Association
• /
• v.26 no.1
• /
• pp.123-136
• /
• 1988

This study attempts to shed some lights on an effect of consumer education by using the formal education as a proxy variable and measuring the effect of the formal education on consumer behavior. This study utilizes economic theories and develops a theory to analyze the effect. Within the conceptual framework employed in this study, it is hypothesized that education raises productivity in the nonmarket sector and thereby affects consumer behavior in the same manner as money income affects behavior. the data are taken from the self-administered questionnaires among 553 housewives in July 1987. the procedure used is to fit separate engel curves for the expenditures on various goods by the weighted regression technique. The empirical results support the hpothesis. Therefore, this study shows positive effects of education on the productivity of household production functions. This result implies that consumer education would enhance efficiency in consumer behavior significantly.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.349-352
• /
• 2015

This paper estimates electrical fire damage cost-effect to analyze electrical safety efficiency by applying a cost-benefit analysis method for analyzing the efficiency of a business public interest. Electrical fire loss statistics data was presented as direct costs and casualties, including deaths due to an electrical fire, this paper adds overhead "Incidental Cost of Accidents to the Employer" by W. H. Heinrich was applied to estimate the cost of economic loss. Also wounded, including the loss of human deaths by referring to the car accident insurance claims costs and human development estimated the losses caused by an electrical fire. And to perform a cost-benefit analysis of the electrical safety as a result of future work. In this paper, the economic effect of the electric field of safety and public interest work to systematically presented.