• Journal of Institute of Convergence Technology
• /
• v.6 no.1
• /
• pp.13-16
• /
• 2016

The purpose of this study is analysing the characteristics of vehicle fuel economy and greenhouse gase emissions according to driving pattern of drivers. Current fuel economy has not established on official test methods. The difference between actual fuel efficiency and specification fuel efficiency bring up consumer complaints and misunderstandings about fuel economy. Against this background, The country is progressing the study on influence of the fuel efficiency according to variety test conditions. This study analyze the driving pattern of the different drivers and influence of the fuel efficiency according to driving pattern of different drivers.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.109-117
• /
• 2010

The purpose of advanced traffic information system(ATIS) is to help drivers save time and energy in getting to their destinations by providing traffic information through variable message sign(VMS), internet, traffic broadcasting and mobile phones. ATIS does not just provide drivers with benefits in terms of time and energy, but it provides them with psychological benefit as well, i.e., the drivers can relieve their anxiety by getting provided with traffic information. In this study, the efficiency of traffic information system is evaluated and degree of satisfaction of drivers with the system is analyzed by building satisfaction models of various media of traffic information. Each medium has different factors for satisfaction and each factor has different degree of influence, but in general, the efficiency of traffic information in helping drivers choose routes and in providing drivers with peace of mind is considered to have the highest influence on satisfaction of drivers with the system.

• Health Policy and Management
• /
• v.10 no.4
• /
• pp.116-143
• /
• 2000

Considerable attention has been devoted in the accounting literature to identify the factors that cause or drive the costs of overhead activities. This paper extends recent cost driver research to the health care provider. In various case studies, it has been suggested that overhead costs are driven by volume and complexity variables. This paper investigates the significance of these variables in determining hospital overhead costs, how they are structurally related and how the cost impacts of these variables can be estimated in practice. This paper analyzes the determinants of hospital costs using the sample of South Korea hospitals for seven year during the period 1952－1997. The paper focuses on the extent to which hospital overhead costs depend on complexity, efficiency in addition to depending on more conventional volume based measures of hospital activity. The results of regression analysis suggest that volume and complexity factors positively and significantly affect overhead costs in the hospital industry. The results show that the complexity-related cost drivers strongly affected on the overhead costs in tile health care provider industry more than manufacturing industry which is mainly affected by volume-related cost drivers. That means each Industry may have different cost structures. Therefore it Is Important to find their proper cost structures and cost drivers and use them. Futhermore identification of overhead or indirect cost drivers is likely to be particularly useful in heath care. The identification of cost drivers can be of benefit to all health care stakeholders because these facilitates more efficient management of the national resources devoted to health care. While this study has documented that the level of service complexity is a significant determinant of hospital overhead costs, caution should be exercised in interpreting this as supportive of the cost accounting procedures associated with ABC. It is an open question whether even a well-designed ABC system will provide suitable proxies for marginal costs for decision making purposes.

• Korean Management Science Review
• /
• v.31 no.4
• /
• pp.135-150
• /
• 2014

This paper analyzes the operational efficiency of 91 individual retail stores in Seoul by a two-step procedure. In the first step, a data envelopment analysis (DEA) model is used to identify the efficiency scores. Three inputs (store size, number of items, and number of employees) and two outputs (sales and number of customers) are used for the efficiency measurement. In the second step, a Tobit regression model is used to identify the drivers of efficiency. DEA efficiency scores are used to test hypotheses on the impact of five independent variables, namely store age, number of items per store size, number of items per employee, trade area index, and number of competitors. Results of the Tobit analysis show that number of items per store size, number of items per employee, and number of competitors play a significant role in influencing the operational efficiency of retail stores. Managerial implications of the study are discussed.

• Journal of Intelligence and Information Systems
• /
• v.10 no.2
• /
• pp.189-209
• /
• 2004

The collaboration between businesses in a demand chain has three layers: Integration, Exchange, and Synchronize. The latter the layer is, the stronger the collaboration gets. This paper investigated drivers influencing intelligent demand chain integration strategy (supply integration, demand integration, demand chain integration) in Korea manufacturing and services. The drivers are classified into two types: rational efficiency driven and bandwagon driven. We find tile differences in the characteristics of drivers affecting the strategies. Besides, this study suggests the better integration strategy for Korea firms. In conclusion it says that demand integration strategy is chosen to improve efficiency, whereas supply integration strategy is influenced by external pressure.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.2
• /
• pp.15-28
• /
• 2003

The one of the most important factors is the platoon design on developing AH3(Advanced Highway System), as it is related to traffic efficiency and drivers' safety. This study was evaluated that how much speed is comfortable for drivers and how long distance is appropriate for vehicular gap of platoon by measuring drivers' physiology signal and sensibility. A fixed-based AHS simulator was developed by using a real vehicle cockpit and the restructured part of Korean highway for human factors evaluation. The EEG(electroencephalogram), ECG (electrocardiogram) and GSR(Galvanic Skin Response) were measured for obtaining drivers' physiology signal according to the change of speed and gap. The brain wave(${\alpha},\;{\beta},\;{\delta},\;{\theta}$) by EEG, the response of the autonomic nervous system. the sympathetic and parasympathetic nervous system, by ECG, and relax-arousal situation by GSR were analyzed. The SD(Semantic Differential) method was also applied to evaluate drivers' sensibility by 5-grade evaluation scale with 96 adjectives. SSQ(Simulator Sickness Questionnaire) was used to measure the simulator sickness of pre and post driving, two times. As the results, drivers were comfortable with 120km/h speed of platoon and lam to 15m vehicular distance. The results of this study may differ from the adaption of the reality because of many parameters. However, the purpose of this study is show to significant results of the drivers' safety and the acceptability of human factors evaluation.

• Journal of Power Electronics
• /
• v.6 no.1
• /
• pp.73-82
• /
• 2006

Plasma display panels (PDPs) have a serious thermal problem, because the luminance efficiency of a conventional PDP is about 1.5 1m/W and it is less than $3\~5\;lm/W$ of a cathode ray tube (CRT). Thus there is a need for improving the luminance efficiency of the PDP. There are several approaches to improve the luminance efficiency of the PDP and we adopted a driving PDP at high frequency range from 400kHz up to over 700kHz. Since a PDP is regarded as an equivalent inherent capacitance, many types of sustaining drivers have been proposed and widely used to recover the energy stored in the PDP. However, these circuits have some drawbacks for driving PDPs at high frequency ranges. In this paper, we investigate the effect of the parasitic components on the PDP itself and on the driver when the reactive energy of the panel is recovered. Various drivers are classified and evaluated based on their suitability for high frequency drivers. Finally, a current-fed driver with a DC input voltage bias is proposed. This driver overcomes the effect of parasitic components in the panel and driver. It fully achieves a ZVS of all full-bridge switches and reduces the transition time of the panel polarity. It is tested to validate the high frequency sustaining driver and the experimental results are presented.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.4
• /
• pp.397-402
• /
• 2013

This paper proposes a new passive type LED driver which satisfies the standard of power factor (PF) and total harmonic distortion (THD). The proposed passive LED driver also has high-efficiency and long-life time characteristics compared to active LED driver which is composed of op-amp, switches and so on. By using just passive components such as inductor, capacitor, and diode, it has resolved extremely short-life time and low-efficiency problems of previous LED drivers. It has achieved PF of 0.99, THD of 16.4 %, and the total efficiency of 95 %. The proposed passive LED driver is fully analyzed and verified by simulations and experiments, which results are in good agreement each other.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1405-1411
• /
• 2011

It is very often for the experienced diesel locomotive drivers to identify the proper replacing time for the fuel adjustment tube only based on their experience. Because of that, sometimes the locomotive's fuel is burned out due to the unnecessary torque. Or sometimes, the locomotive does not operate with its accelerating performance because the fuel is not supplied at the appropriate moment. Meanwhile, recent typical auto vehicles provide drivers with the average fuel efficiency and the instant fuel efficiency in real-time. By providing the real time display mentioned above, it is one of the good examples that those drivers, who had driven their cars not properly and used a lot of fuel with their bad driving habits, obtain the efficient driving pattern by continuous educating effect. Similarly, if the diesel locomotive provides the train driver with the optimal driving pattern within a certain driving section, it will be effective for fuel saving. It is possible to make the most effective driving pattern by performing the repeated trial running especially for the railway because the track's operating routes, its grades, and etc are relatively precise. This research analyzes the result data which was obtained by many times trial running on the identical section after equipping the fuel use measuring device to a certain test vehicle, and confirms the fuel saving effect depending on the driving pattern along the test section. At the same time, the research to establish the optimal driving pattern was progressed.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.380-384
• /
• 2005

Plasma display panel (PDP) has a serious thermal problem, because the luminance efficiency of the conventional PDP is about 1.5 lm/W and it is less than $3{\sim}5$ lm/W of cathode ray tube (CRT). Thus there is a need for improving the luminance efficiency of the PDP There are several approaches to improve the luminance efficiency of the PDP and we adopt the driving PDP at high frequency range from 400 kHz up to over 700 kHz. Since a PDP is regarded as an equivalent inherent capacitance, many types of sustaining drivers have been proposed and widely used to recover the energy stored in the PDP. However, these circuits have some drawbacks for driving PDP at high frequency range. In this paper, we investigate the effect of the parasitic components of PDP itself and driver when the reactive energy of panel is recovered. Various drivers are classified and evaluated whether it is suitable for high frequency driver, and finally current-fed type with do input voltage biased is proposed. This driver overcomes the effect of parasitic component in panel and driver and fully achieves ZVS of all full-bridge switches and reduces the transition time of the panel polarity.