• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.120-127
• /
• 1998

The finite element method has been used to model and analyze the heat transfer phenomena during manufacturing process of $MoSi_2$ by SHS(Self-propagating High-temperature Synthesis). For this purpose nonlinear transient heat transfer analyses by using ANSYS have been performed to estimate the temperature distributions and the peak temperature in the test specimen. The effects of manufacturing process parameters such as pre-heating temperatures, the velocity of reaction zone have been investigated. The results of the analysis have been compared with the experimental results.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.285-287
• /
• 2016

이황화 몰리브덴(Molybdenum disulfide: $MoS_2$)을 채널(Channel) 물질로 이용하여 metal-oxide-semiconductor(MOS) 구조를 제작하고, 효율적인 제작과정을 제시하였고 특히, Source/Drain의 Doping concentration을 조절하여 효과적인 $MoS_2$ Transistor를 제작 및 시뮬레이션 하였다. 그 후 여러 MOSFET의 특성 분석을 통하여 소자로서의 기능을 확인해보았다. 그리고 특히 채널의 전기적인 특성을 분석하고 채널 내 그리고 contact 사이의 저항 및 mobility의 특성을 알아보았는데, 그 중 Source/Drain Doping Effect와 performance 분석을 통해, 최적화된 $MoS_2$ Transistor를 찾아보았다.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.607-612
• /
• 1998

다합금계백주철의 성분원소인 Cr, V, Mo 및 W 의 첨가량을 변화시켜 응고조직을 관찰하였다. MC탄화물은 초정 austenite dendrite 내에 괴상 및 구상으로 M7C3탄화물은 intercellular boundary에 꽃형태 또는 bar 형태로, 그리고 M2C 탄화물은 M7C3탄화물과 마찬가지로 intercellular boundary에 침상으로 정출하였다. 기지조직은 주방상태에서 pealite 또는 (pearlite + austenite)의 혼합조직으로 구성되어 있었으며, 또한 EPMA 분석결과 MC탄화물은 V, M7C3 탄화물은 Cr 그리고 M2C탄화물은 Mo 및 W가 주성분으로 되어 있음을 알 수 있었다. 냉각곡선을 측정한 결과 액상에서 MC, M7C3, M2C 순으로 공정반응이 일어나고 있었으며 또한 X-선 회절시험을 통해 각 탄화물의 회절 peak를 관찰하였는바 응고조직의 사진과 잘 일치하고 있음을 알 수 있었다.

• The Plant Pathology Journal
• /
• v.25 no.4
• /
• pp.417-421
• /
• 2009

The analysis of the full length genome of Korean isolates of Pepper mottle virus (PepMoV) in previous study showed molecular variations and are found to be related to symptom variation and pathogenicity (Kim et al., 2009, Virus Res. 144:83-88). To fully understand the molecular variation of PepMoV in Korea, we further assessed the role of RNA recombination to biological variation and evolution of PepMoV. Full-length genome of a total of 17 Korean-PepMoV and 2 American (CA and FL) isolates were examined for possible detection of genetic recombination using different recombination detections programs and detected 5 and 8 tentative recombination events using RDP3 and Splits Tree4 programs, respectively. Interestingly, tentative recombinants detected such as isolates 57, 134 and 217 were previously identified as severe isolates and 205135 and 205136 as differentiating isolates (Kim et al., 2009, Virus Res. 144:83-88). In addition, recombination was frequently detected in the Vb isolate, the first PepMoV isolate reported in Korea, suggesting significant involvement in the evolution of PepMoV in Korea. These initial results of our recombination analyses among PepMoV isolates in Korea may serve as clues to further investigate the biological variations and evolution of PepMoV brought about by recombination.

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.18-25
• /
• 2003

Effects of the precipitation of $\sigma$ phase on the metastable pitting as a precursor of stable pitting corrosion and also on the progress of stale pitting of the 25Cr-7Ni-3Mo-0.25N duplex stainless steel were investigated in chloride solution. Electrochemical potential and current noises of the alloy were measured in 10 % ferric chloride solution ($FeCl_3$) with zero resistance ammeter (ZRA), and then analyzed by power spectral density (PSD) and by corrosion admittance ($A_c$) spectrum. With aging at $850^{\circ}C$, the passive film of the alloy was found to get significantly unstable as represented by power spectral density (PSD) and a transition from metastable pitting state to stable one was observed. In the corrosion admittance spectrum, the number of negative $A_c$ corresponding to the state of localized corrosion increased with aging, suggesting that the precipitation of $\sigma$ phase considerably degraded the passive film by depleting Cr and Mo around it at $\alpha/\sigma$ or $\gamma/\sigma$ phase boundaries, thereby leading to the initiation of the pitting corrosion. However, the Cr and Mo at $\alpha/\sigma$ or $\gamma/\sigma$ phase boundaries which were once depleted due to the precipitation of the $\sigma$ phase were partly replenished by the diffusion of Cr and Mo from the surrounding matrix with aging time longer. The initiation of pitting seems to be associated with the precipitation density of the $\sigma$ phase with an effective size needed to induce the sufficient depletion of Cr and Mo around it.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.93-104
• /
• 2004

This pot experiment was conducted to investigate the effects of combined micronutrient application($T_1$; control, $T_2$; Fe, $T_3$; Fe+Mn, $T_4$; Fe+Mn+Cu, $T_5$ ; Fe+Mn+Cu+Zn, $T_6$ ; Fe+Mn+Cu+Zn+Mo, T$_{7}$; Fe+Mn+Cu+Zn + Mo + B) on forage performance of pure and mixed cultures of orchardgrass and white clover. The fifth part was concerned with the changes in the total and relative contents, uptake amounts, and mutual ratios. of micronutrients in forages. The results obtained are summarized as follows: 1. The relative contents(total contents of 6 micronutrients = 100%) of Fe and Mn were considerably influenced by the antagonism between Fe and Mn, and also were influenced by the differences in Mn-absorption between orchardgrass and white clover. Compared with pure culture, orchardgrass showed high relative contents of Mn, and low relative contents of Fe and B in mixed culture. White clover, however, tended to be exactly opposed to the above trends. In relative contents, the T$_6$ 6/ resulted generally in decrease of Fe. However the $T_7$ resulted in increase of Mn and B. In addition, the $T_7$ resulted in decrease of Cu and Zn in orchardgrass, and Mo in white clover. 2. In general, there were differences in the tendency between the yield changes and the uptake amounts of micronutrients. General differences have been showed in the uptake amounts and mutual ratios of micronutrients based on the forage species, pure/mixed culture, additional fertilization, and antagonism. The uptake amounts of total micronutrients were generally increased by the treatments with increased combination. In uptake amounts, the $T_7$ resulted in the increase of Mn and B, and decrease of Mo. 3. The mutual ratios of Fe/Mn, Fe/Cu, and Mn/Cu were considerably influenced by the antagonism between Fe and Mn. At the $T_7$ , very low ratio of Fe/Mo affected by the T6 tended to be somewhat improved because of the decrease of Mo content． The poor growth of forages at the $T_6$ was improved by the $T_7$ . This fact was likely to be caused by the adequate B/Mo ratio.

• Journal of Animal Science and Technology
• /
• v.56 no.3
• /
• pp.9.1-9.8
• /
• 2014

This study was performed to investigate the effects of different forms of concentrate fed to Hanwoo steers on performance, carcass characteristics, and economic performance. Forty-two Hanwoo steers (average age of $5.1{\pm}0.8mo$. with body weight of $147.05{\pm}10.85kg$) were randomly allotted into FC (animals fed flakes for entire experimental period) and GC (animals fed grounded concentrate during growing and fattening phases followed by flaked concentrate during finishing phase) groups for 758 d after reaching an age of $30.0{\pm}0.82mo$. There was no difference in body weight (BW) or ADG between the treatments until fattening (15 ~ 22 mo.) phase. However, by finishing phase (23 ~ 30 mo.), the GC group (739.24 kg BW and 0.67 kg ADG) showed greater (P < 0.05) BW and ADG than the FC group (702.93 kg BW and 0.59 kg ADG). Steers in the GC group also showed greater (P < 0.05) BW and ADG than the FC group throughout the entire experimental period (5 ~ 30 mo.). There was no significant difference in carcass weight or backfat thickness between the treatments. M. Longissimus dorsi area of the GC group ($91.00cm^2$) was greater (P < 0.05) than that of the FC group ($83.59cm^2$). Marbling score and percentage of $1^{{+}{+}}$ meat quality grade were 14.0 and 48.0% higher in the GC group compared to the FC group. There was no significant difference in physicochemical characteristics, including moisture and crude protein levels, between the treatments. Gross income per head excluding operating expenses was 59.3% greater in the GC group (1,647,512 won) compared to the FC group (1,034,343 won).

• Korean Journal of Materials Research
• /
• v.7 no.4
• /
• pp.310-316
• /
• 1997

The effects of carbide and matrix structures on the abrasion wear resistance of multi-component white cast irons with 3.0 mass%C have been studied in this paper. Four different heats were poured in order to obtain the specimens with different combinations of the carbide structures: a basic iron(3.0 mass%C-5.0 mass%Cr-5.0 mass%V-5.0 mass% Mo-12.5mass%W)for M$_{6}$C and M$_{7}$C$_{3}$ carbides, and a Cr free iron(3.0 mass%C-5.0 mass%V-2.5mass%Mo-12.5 mass%W) for MC and M6C carbides. A conventional high Cr free free iron(3.0 mass%C-5.0 mass%V-2.5 mass%Mo-12.5 mass%W) for MC and M6C carbides. A conventional high Cr white cast iron was also poured to compare its wear resistance with those of the multi-component white cast irons. In the as-cast condition, the range of abrasive wear rate(Rw=mg/min) was from 4.15 to 5.98 . The lowest Rw, which means the highest wear resistance, was obtained in the basic iron with nodular MC, lamellar M$_{2}$C and cellular M$_{7}$C$_{3}$ carbides. On the other hand, the Rw of the high Cr white cast iron ranked between the basic iron and the Mo and W free iron. In each alloy, the Rw of air hardened or tempered specimen was lower than that of the as-cast one because of the change of matrix structures by the heat treatments. The Rw of the hear treated speci-mens increased in the order Mo and W free iron, basic iron, Cr free iron, high Cr iron, and V free iron.n.n.n.

• Korean Journal of Metals and Materials
• /
• v.47 no.9
• /
• pp.533-541
• /
• 2009

Materials used for a reactor pressure vessel(RPV) are required high strength and toughness, which determine the safety margin and life of a reactor. Ni-Mo-Cr low alloy steel shows better mechanical properties than existing RPV steels due to higher Ni and Cr contents compared to the existing RPV steels. The present study focuses on effects of Ni, Cr contents on the cleavage fracture toughness of Ni-Mo-Cr low alloy steels in the transition temperature region. The fracture toughness was characterized by a 3-point bend test of precracked Charpy V-notch(PCVN) specimens based on ASTM E1921-08. The test results indicated that the fracture toughness was considerably improved with an increase of Ni and Cr contents. Especially, control of Cr content was more effective in improving fracture toughness than manipulating Ni content, though Charpy impact toughness was changed more extensively by adjusting Ni content. These differences between changes in the fracture toughness and that in the impact toughness were derived from microstructural features, such as martensite lath size and carbide precipitation behavior.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.3
• /
• pp.153-158
• /
• 2013

Molybdenum (Mo) in rhizosphere influences sulfate assimilation as well as a number of other physiological aspects. In this study, the activity of key enzymes in sulfate assimilatory pathways, such as ATP sulfurylase (ATPs), adenosine 5'-phosphosulphate reductase (APR), as well as the responses of reactive oxygen species (ROS), were analyzed to elucidate the metabolic and physiological effects of external Mo supply to detached leaves of Trifolium repens L. Mo supply with a range from 1 mM to 40 mM depressed the activity of ATPs throughout the entire time course. In the leaves exposed to 1 mM Mo, a continuous decrease in the activity of ATPs was confirmed by Native-PAGE. The APR activity was also declined by Mo treatment. The accumulation of $H_2O_2$ and ${O_2}^{{\cdot}-}$ were not significant up to 10 mM Mo, whereas a remarked accumulation was detected under 40 mM Mo supply. The data suggest that an external supply of Mo has an inhibitory effect on sulfate assimilation, and induces oxidative stress only at an extremely high concentration.