• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.797-799
• /
• 2010

In preparation of NBD dimer, one of the industrially useful multicyclic hydrocarbon compound, various catalyst, solvent and byproducts were included in reaction product at the end of dimerization reaction. In order to increase the yield of NBD dimer mixture, first of all, effective separation process development was required. The research for improvement of NBD dimer yield were performed by use of eco-friendly and recyclable separation solvent.

• KSBB Journal
• /
• v.29 no.2
• /
• pp.98-105
• /
• 2014

Three different types of extraction processes, which used supercritical carbon dioxide ($SCCO_2$) and organic solvent, were attempted to improve the extraction yield of oil from Chlorella vulgaris: cosolvent-modified $SCCO_2$ extraction, $SCCO_2$ extraction with ultrasonic sample treatment in organic solvent, and static extraction with organic solvent followed by dynamic $SCCO_2$ extraction. Among these, the last $SCCO_2$ extraction process was found to be most effective in the extraction of oil. Compared with pure $SCCO_2$ extraction, the extraction yield of oil was observed to increase about 7 times.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.47-53
• /
• 1989

The effect of organic solvent in the dyeing of silk fiber by acid dye was investigated. Acetophenone and benzyl alcohol were shown to be the most effective for the rate of dyeing of silk fiber by Milling Cyanine 5R (C.I. Acid Blue 113), a milling type acid dye, but, with benzyl alcohol, the equilibrium dye uptake was much lower than that in the absence of it. In the presence of solvent, maximum dye uptake shifted to lower temperature than 6$0^{\circ}C$, while without solvent, it was shown at about $60^\circ{C}$. When dyed by Orange II (C.I. acid Orange 7) under same condition equilibrium dye uptake of silk fiber was lower than that for milling type acid dye, and in the presence of benzyl alcohol, still much lower uptake resulted. All these fact reveals that organic solvents in the solvent-assisted dyeing of silk fiber broaden micelle spacings too much, resulting in increased rate of dyeing, and decreased equilibrium dye uptake, contrary to wool.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.113-116
• /
• 2011

Slope analysis method was applied to determine the stoichiometry of the solvent extraction reaction of Ni(II) by Alamine336 from strong HCl solution range from 1 to 10 M. Solvent extraction data was obtained from the literature. The effective equilibrium constant for the solvent extraction reaction was estimated by considering the ionic equilibria of $NiCl_2$ in the HCl solution. The measured distribution coefficients of Ni(II) agreed well with those calculated in this study. Our results suggest that further study on the measurement of the activities of nickel complexes at high HCl solution need to be done.

• Preventive Nutrition and Food Science
• /
• v.16 no.4
• /
• pp.321-327
• /
• 2011

Water, methanol and ethanol extracts of ginseng leaves were assayed for total phenolics and flavonoids, ascorbic acid, cupric and ferrous ion chelating activities, 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, ferric reducing antioxidant power (FRAP) assay and ABTS radical cation decolourization (TEAC) assay for their antioxidant properties. The ethanol extract of ginseng leaves contained significantly (p<0.05) higher amounts of total phenolics and flavonoids (600.57 and 1701 mg/100 g) than methanol (374.43 and 1512.64 mg/100 g) and water extracts (248.30 and 680.05 mg/100 g). Among solvent extracts of ginseng leaves, the ethanol extract showed the most powerful antioxidant activities. However, the ferrous ion chelating activity of ginseng leaf extracts were lower than the cupric ion chelating ability. These differences in concentrations of key antioxidants among various solvent extracts seemed to be responsible for their differences in antioxidant activities. These results suggest that ethanol extract of ginseng leaves has the most effective antioxidant capacity compared to the methanol and water extracts tested in the present study. Thus, it can be applied for the effective extraction of functional material from ginseng leaves for the usage of pharmaceutical and/or food industries.

• Preventive Nutrition and Food Science
• /
• v.12 no.4
• /
• pp.267-272
• /
• 2007

The objective of this study was to investigate antioxidant activities of Panax ginseng extracted with various solvents including n-hexane, chloroform, EtOAC, n-butanol and water. Among the various ginseng extracts, ethyl acetate (EtOAC) extracts showed the most powerful scavenging activities against DPPH radicals. Among the other solvent extracts, the butanol extract seemed relatively more effective in scavenging activity, followed by chloroform, water and hexane extracts. Moreover, the highest reducing power and ferrous ion chelating activity were found in the EtOAC extract followed by other extracts of ginseng. EtOAC extracts, which exhibited the best antioxidant activities of all solvent extracts of ginseng, possessed higher concentrations of total phenolics (777.61 mg/100 g) than other extracts. These results suggest that EtOAC extracts of ginseng (P. ginseng C.A. Meyer) have the most effective antioxidant capacity compared to n-hexane, chloroform, n-butanol and water tested in this study, and has important applications for the pharmaceutical and food industries.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2004

Amount of residual ink solvent on the packaging materials from Korea, Japan and Europe was measured and compared. The amount of packaging materials from Korea was much higher than that of Japan and Europe. To reduce the residual amounts of ink solvent, aging condition of printed packaging materials including aging time and temperature was modified and evaluated. Aging with high temperature and short time ($60^{\circ}C$ and 24 hours) was more effective for reduction of residual amount of ink solvent than that with low temperature and long time. To find out change of reduction pattern of residual amount of solvent according to plastic packaging material, several monolayer and multilayer packaging materials were selected. Among the monolayer packaging materials, the amount of EVOH and PET was lower than that of polyolefin plastic film including PE and PP. PP/EVOH/PET among the selected multilayer film showed the lowest amount of residual ink solvent on food packaging materials. Result of this research revealed that the residual amount of ink solvent can be reduced by proper selection of aging condition with and by appropriate application of mutilayer plastic film.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1752-1756
• /
• 2006

This study explores and interprets in a new way the complex solvent and the temperature dependence of the NMR shifts for the N-$CH_2$ protons in tris(N,N-diethyldithiocarbamato) iron(III) in acetone, benzene, carbon disulfide, chloroform, dimethylformamide and pyridine. The NMR shifts are interpreted in terms of the Fermi contact interaction and the dipolar term from the multipole expansion of the interaction of the electron orbital angular momentum and the electron spin dipolar-nuclear spin angular momentum. This analysis yields a direct measure of the effect of the solvent system on the environment of the transition metal ion. The results are analysed in terms of the crystal field environment of the transition metal ion with contributions from (a) the dithiocarbamate ligand (b) the solvent molecules and (c) the interaction of the effective dipole moment of the polar solvent molecule with the transition metal ion complex.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.1
• /
• pp.19-24
• /
• 2001

A solvent sublation has been studied for the determination of trace Au(III), Pt(IV) and Pd(II) in waste water with their complexes of 2-mercaptobenzothiazole (MBT). Experimental conditions such as the concentration of HCl, the amount of MBT as a ligand, the type and amount of surfactants, bubbling rate and time, and the type of organic solvent were optimized for the solvent sublation, i.e., 25.0 mL of 2.0 M HCl solution and 30mL of 0.4%(w/v) MBT ethanolic solution were added to a 1.0 L sample to form stable complexes. The addition of 4.0 mL of 1 ${\times}$$10^{-3}$ M CTAB (cetyltrimehtylammonium bromide) solution was needed for the effective flotation accomplished by bubbling nitrogen gas at the rate of 40.0 mL/min for 35 minutes. As a solvent, 20.0 mL of MIBK (methylisobuthylketone) was used to extract the floated complexes. The procedure was applied to three kinds of waste waters. Au(III) was determined as 0.68 ng/mL and 0.98 ng/mL respectively for final washed water of two plating industries in Banwol. Pd(II) and Pt(IV) were not detected in any of the three samples. The recovery, which was obtained with analyte-spiked samples, were 95-120%.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.10
• /
• pp.1036-1042
• /
• 1998

The preconcentration and determination of trace elements in water samples were studied by a solvent sublation utilizing dithizonate complexation. After metal dithizonates were formed, trace amounts of cadmium, cobalt, copper and lead were floated and extracted into small volume of a water-immiscible organic solvent on the surface of sample solution and determined in the solvent directly by GF-AAS. Several experimental conditions as formation condition of metal-dithizonate complexes, pH of solution, amount of dithizone, stirring time, the type and amount of surfactants, N2 bubbling rate and so on were optimized for the complete formation and effective flotation of the complexes. And also four kinds of light solvents were compared each other to extract the floated complexes, effectively. After the pH was adjusted to 4.0 with 5 M HNO3, 8.0 mL of 0.05% acetone solution of dithizone was added to 1.00 L water sample. The dithizonate complexes were flotated and extracted into the upper methyl isobutylketone (MIBK) layer by the addition of 2.0 mL 0.2% ethanolic sodium lauryl sulfate solution and with the aid of small nitrogen gas bubbles. And this solvent sublation method was applied to the analysis of real water samples and good results of more than 85% recoveries were obtained in spiked samples.