• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1661-1666
• /
• 2000

Nowadays, the two microphone method is accepted as the standard as specified in ASTM E1050-90 for measuring in-duct acoustic properties. However, research results on using the least square method with multiple measurement points and broadband excitation have been reported for enhancing the frequency response of the two microphone method. In this paper, the effects of varying the relative measurement positions on errors in the estimation of the acoustic quantities is studied for the multiple microphone method. Both of the theoretical and experimental results show that, among every possible sensor positioning configurations, the equidistant positioning of sensors yields the smallest error within the effective measurement frequency range. In addition, it is noted that the measurement accuracy can be increased and the effective frequency range can be widened by increasing the number of equidistant sensors. Measurement examples are shown and the results support the findings.

• Journal of Radiation Protection and Research
• /
• 제28권4호
• /
• pp.343-348
• /
• 2003

We have investigated in detail the operating properties of Gas Electron Multiplier (GEM) detectors with a double conical and a cylindrical structure in a wide range of external fields and GEM voltages. With the double conical GEM, the gain gradually increased with time by 10%; whereas this surface charging was eliminated with the cylindrical GEM. Effective gains above 1000 were easily observed over a wide range of collection field strengths in a gas mixture of $Ar/CO_2(70/30)$. The transparency and electron collection efficiency were found to depend on the ratio of external field and the applied GEM voltage; the mutual influence of both drift and collection fields was found to be trivial.

• 한국생산제조학회지
• /
• 제7권2호
• /
• pp.54-61
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 aluminum alloy for small tensile overload under high-low block loading condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investigated by compliance method. The applied initial stress ratios are R=-0.5 R=0.0 and R=0.25 Crack length, effective stress intensity factor range, ratio of effective stress intensity factor range and crack growth rate etc, are inspected with fracture mechanics estimate.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1996년도 경북지부 결성 및 추계학술발표회 논문집
• /
• pp.50-53
• /
• 1996

This paper reports the experimental results for the determination of the overall partition coefficient of VOCs in unsaturated soil, A chromatographic method was used for the determination of gaseous partition coefficients to natural soil under various water content conditions. The equilibrium vapor pressure of water over saturated salt solution was used to fix the relative humidity of the air and control the water content of the soil systems. The transport behavior was studied for dichloromethane, trichloroethane and dichlorobenzene pollutants, with log octanol-water partition coefficients(log $K_{ow}$ ) which range from 1.25 to 3.39, or water to soil partitioning which varies by 135 times; water solubility constants which vary by 3 times; and vapor pressures which range from 1 to 362 torr. Water content of the soil had a pronounced effect on the effective partition coefficient(between gas and soil + water stationary phase) as well as on the effective dispersion coefficient.

• 한국지반공학회논문집
• /
• 제16권5호
• /
• pp.45-54
• /
• 2000

경험적으로 방법에 의존해온 대형 진동햄머다짐의 영향심도를 평가하고자 수치해석적인 기법을 사용하였다. 수치해석적인 기법을 사용하였다. 수치해석에 사용한 프로그램은 범용 유한요소 해석프로그램인 ABAQUS이며, 인천 신공항 매립지에서 시험 시공한 대형 진동햄머다짐의 자료와 수치해석한 결과의 비교를 통해 검증하였다. 수치해성에 사용한 물성은 현장시험과 실내시험을통해 구하였으며 영향깊이는 지반이 동적 하중에 변형할 때 소산하는 소성변형율에너지량의 분포를 판정하였다. 수치해석결과 소성변형율에너지 소산량의 시간에 따른 변화로부터 다짐의 영향깊이 및 수평영향거리를 추정할 수 있었다. 소성변형율에너지 수렴시의 외부에너지를 Menard의 경험식에 적용할 경우 영향깊이를 판정할 수 있음을 알았다. 따라서 Menardtlr으로부터 영향깊이를 다짐하는데 필요한 최소한의 에너지를 구할수 있을 것으로 판단된다.

• The Journal of Korean Physical Therapy
• /
• 제29권4호
• /
• pp.187-193
• /
• 2017

Purpose: The purpose of this study was to confirm the immediate effect of wrist joint mobilization with taping on the range of motion, grip strength, and spasticity. Methods: Thirty stroke patients were randomly divided into two groups: the joint mobilization with taping group (n=15) and a taping group (n=15). For measurement of spasticity and joint range of motion, the modified Tardieu scale, active and passive range of motion of wrist flexion, as well as extension were measured by the Rapael smart glove, and for grip strength measurement, grip dynamometer was performed. Results: The experimental group showed a significant improvement in the range of motion, grip strength, and spasticity after 10 minutes of taping (p<0.05), no significant difference was found in the control group (p>0.05). However, there was no significant difference between the two groups (p>0.05). Conclusion: The study found that wrist joint mobilization with taping has an immediate effect on wrist range of motion, grip strength, and spasticity in stroke patients, whereas it was not effective in the control group with just taping. The long-term change still needs to be evaluated, when taking into consideration of the carryover effect.

• 한국항행학회논문지
• /
• 제13권4호
• /
• pp.559-565
• /
• 2009

Inline 분산 제어(DM; dispersion management)과 광 위상 공액기 (OPC; optical phase conjugator)를 갖는 광 전송 링크 구조가 적용된 1 Tbps WDM 전송 시스템의 구현 가능성과 전송 거리 신장 정도를 연구하였다. 본 논문에서 제안하는 광 전송 링크 구조를 $26{\times}40$ Gbps WDM 전송 시스템에 적용하고 전송 거리에 의존하는 전체 잉여 분산 (NRD; net residual dispersion)를 결정한 경우 유효 전송 거리가 NRD = 0 ps/nm인 경우에 비해 매우 신장되는 것을 확인하였다. 또한 전송 거리와 WDM 채널의 입사 전력에 의존하는 precompensation과 postcompensation의 유효 범위를 도출하는 방법으로 inline DM의 관 전송 링크의 설계 기준을 제시하였다.

• 대한물리치료과학회지
• /
• 제16권4호
• /
• pp.75-81
• /
• 2009

Background: The purpose of this study was to confirm whether surface FES was effective in the function of chronic stroke patients' affected shoulder and whether FES influenced their functional abilities in ADL, as well. Method: the subjects were inpatients at a general hospital in Gyeonggi-Do, Korea and had been diagnosed as a sub-luxation in their affected shoulder. They were 26 and were separated to an experimental group and a control group, in equal number. Both groups had gotten an exercise treatment for 6 weeks. The control group didn't get any FES as opposed to the experimental group. Result: in the experimental group there was no statistical significant difference in the vertical space and the joint space, even though the space was reduced. In the control group, there was no statistical significant difference, either. Moreover, each space of their shoulders was increased. In the range of motion of each group, there was no statistical significant difference. In functional independent ability, there was a significant difference in an experimental group. In contrast, there was no difference in a control group. Conclusion: this result suggests that FES should be effective in the sub-luxation of the patients' affected shoulder and the range of motion of their shoulders. On the other hand, compared to the previous items, FES was quite effective in the functional improvement.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.500-503
• /
• 1995

The magnetic properties of ultrathin $Fe_{84}B_{9}Nb_{7}$ nanocrystalline ribbon alloy with the thickness of $7-14\;\mu\textrm{m}$ were investigated. It was found that the effective permeability at the frequency over 100 kHz increased with decreasing ribbon thickness. Moreover the core loss decreased considerably with reduction of the ribbon thickness. The effective permeability at 1 MHz and the core loss at 1 MHz and 0.1 T for $Fe_{84}B_{9}Nb_{7}$ alloy with the thickness of $7\;\mu\textrm{m}$ were 3,700 and 2.7 W/cc, respectively. The reduction of thickness to less than $10\;\mu\textrm{m}$ was found to be very effective in obtaining high permeability and low core loss in the MHz frequency range. It was considered that the improvement of magnetic properties in the high frequency range was due to the reduction of the eddy current.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.679-682
• /
• 2003

Improvement in MOS fabrication technology have led to high-density high-performance integrated circuits with MOSFET channel lengths in the sub-micron range. For devices of the size, transistor characteristics become highly sensitive to effective channel length. We propose a new approach to extract the effective channel length of MOSFET by Capacitance-Voltage (C-V) method. Gate-to-Source, Drain capacitance ( $C_{gsd}$) are measured and the effective channel length can be extracted. In addition, compared to l/$\beta$ method and Terada method, which has been point out that it fails to extract the accurate effective channel length of the devices, we prove that our approach still works well for the devices with down to sub-micron regime.e.