• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.3
• /
• pp.63-71
• /
• 2003

This study investigated about the seasonal variation of pollutant loads flowing into the Yeong-il bay from constructing Tank model which is the simulation model to evaluate the daily river discharge and pollutant load in the Hyeong-san river watershed. The estimated annual average river discharge of Hyeong-san river flowing into Yeong-il bay is about 878.34×10/sup 6/㎥/year which is about 73% of annual average of total precipitation in Hyeong-san river watershed. The annual average of pollutant load flowing into Yeong-il bay was estimated each 15.11 ton-COD/year, 23.24 ton-SS/year, 10.65 ton-TN/year, and 0.54 ton-Tp/year. For the seasonal variation of pollutant loads, it was tended as increasing of river discharge as increasing of inflow pollutant loads at June and July of summer and October of autumn. The main source of pollutant loads was found to be the Pohang city and Pohang industrial complex which are located near the mouth of Hyeong-san river. Therefore, for effective water quality management of Yeong-il bay, the counterplan to reduce pollutant loads from the main source of pollutant loads is required.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.979-983
• /
• 2009

The mean pH of wastewater discharged from the plating process is 2, so a less amount of alkali is required to raise pH 2 to 5. In addition, if sodium sulfite is used to raise pH 5 to 9 in the secondary treatment, caustic soda or slaked lime is not necessary or only a small amount is necessary because sodium sulfite is alkali. Thus, it is considered desirable to use only $FeSO_4{\cdot}7H_2O$ in the primary treatment. At that time, the free cyanide removal rate was highest as around 99.3%, and among heavy metals, Ni showed the highest removal rate as around 92%, but zinc and chrome showed a low removal rate. In addition, the optimal amount of $FeSO_4{\cdot}7H_2O$ was 0.3g/L, at which the cyanide removal rate was highest. Besides, the free cyanide removal rate was highest when pH value was 5. Of cyanide removed in the primary treatment, the largest part was removed through the precipitation of ferric ferrocyanide: $[Fe_4(Fe(CN)_6]_3$, and the rest was precipitated and removed through the production of $Cu_2[Fe(CN)_6]$, $Ni_2[Fe(CN)_6]$, CuCN, etc. Furthermore, it appeared more effective in removing residual cyanide in wastewater to mix $Na_2SO_3$ and $Na_2S_2O_5$ at an optimal ratio and put the mixture than to put them separately, and the optimal weight ratio of $Na_2SO_3$ to $Na_2S_2O_5$ was 1:2, at which the oxidative decomposition of residual cyanide was the most active. However, further research is required on the simultaneous removal of heavy metals such as chrome and zinc.

• Water for future
• /
• v.9 no.1
• /
• pp.55-69
• /
• 1976

The purpose of this paper is to provide basic data for construction methods of leakage pretaction for estuary barrien which is constructed to in take restoration water from irigative use and a river flow in its ultimate dsicharge to ward to sea, The water, accordingly, has reviewed the discrepancis between theories and experiments based on the hydraulic analysis of ground water through a series of sourveys on equi-patential line of seepage flow and a series of some experiments. apparently, however, the research results herein might reflect in some part not more than inference since those experiments are not conducted in a real foundation but from an indoor experiment or calculation, conclusion in brief are itemized here-under. 1. small-scale barrier require cut-off wall, which should reach the complete impereable layer, 2. Duplication barrier is provided effective in protection saline water seepage. 3. a barrier with broad crest might enable protection of massive seepage by fresh water lens formed from precipitation.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.1
• /
• pp.56-64
• /
• 2015

Acid mine drainage occurrence is a serious environmental problem by mining industry, it usually contains high levels of metal ions, such as iron, copper, zinc, aluminum, and manganese, as well as metalloids of which arsenic is generally of the greatest concern. An indigenous plant extract was used to produce calcium carbonate from Canavalia ensiformis as effective biomaterial, and its ability to form the calcium carbonate under stable conditions was compared to that of purified urease. X-ray diffraction and scanning electron microscopy were employed to elucidate the mechanism of calcium carbonate formation from the crude plant extracts. The results revealed that urease in the plant extracts catalyzed the hydrolysis of urea in liquid state cultures and decreased heavy metal amounts in the contaminated soil. The heavy metal amounts were decreased in the leachate from the treated mine soil; 31.7% of As, 65.8% of Mn, 50.6% of Zn, 51.6% of Pb, 45.1% of Cr, and 49.7% of Cu, respectively. The procedure described herein is a simple and beneficial method of calcium carbonate biomineralization without cultivation of microorganisms or further purification of crude extracts. This study suggests that crude plant extracts of Canavalia ensiformis have the potential to be used in place of purified forms of the enzyme during remediation of heavy metal contaminated soil.

• Journal of the Mineralogical Society of Korea
• /
• v.5 no.1
• /
• pp.42-47
• /
• 1992

The oscillatory zoning pattern in alunite from the Sungsan mine, Korea was studied by the back-scattered electorn(BSE) imaging and electron microprobe analysis. This zoning is not visible under the polarizing microscope, but is spectacularly illustrated in BSE image. Electron microprobe analysis reveals that the zoning is substantially due to the variation in the content of Na substituting for K in the A site of the alunite structure. With increasing brightess in BSE image, conternt of K increases but that of Na decreases. Delicate fine-scale zoning and sharp boundaries between adjacent zones suggest that the zoning would be ascribed to the variation in the composition of hydrothermal fluid around the growing alunite crystals. The effective factors for such a variation would be 1) the fluctuation in the composition of entering fluid. and/or 2) the rapid change in composition of fluid due to the rapid precipitation of more stable. Na-poor alunite.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.1
• /
• pp.1-11
• /
• 1996

Mechanical alloying is an effective process to finely distribute inert dispersoids in an Al-TM(TM is a transition metal) system. It has been considered that high melting point aluminides are formed by precipitation from supersaturated Al(Ti) powder. This analysis is based on the fact that much higher content of TM than the solubioity can be dissolved in alpha aluminum during the high energy ball milling. Thus, decomposition behavior of Ti in the Al(Ti) was considered very important. But it is confirmed that the higher portion of Ti than Al(Ti) solid solution is existed as nano-sized Ti particles in the MA powders by high energy ball nilling from the XRD spectrum and TEM analysis in this study. Therefore, the role of undissolved TM particles affect the formation of aluminides should be suitably considered. In this study, we present experimental observation on the formation of $Al_3Ti$ fron mechanical alloyed Al-Ti alloys in the hyperperitectic region. This study showed that, in the mechanically alloyed Al-20wt%Ti specimen, intermediate phase of cubic $Al_3Ti$ and tetragonal $Al_{24}Ti_8$ formed at $300{\sim}400^{\circ}C$ and $400{\sim}500^{\circ}C$, respectively, before the MA state reaches to equilibrium at higher temperatures. The formation behavior of $Ll_2-Al_3Ti$ is interpreted by interdiffusion of Al and Ti in solid state based on the fact that large amount of nano-sized Ti particles exist in the milled powder. Present analysis indicated undissolved Ti particles of nanosize should have played an important role initiation the formation of $Al_3Ti$ phase during annealing.

• Archives of Pharmacal Research
• /
• v.24 no.2
• /
• pp.150-158
• /
• 2001

The activity of nonsteroidal antiinflammatory drugs (NSAIDs) in rheumatoid arthritis is not only due to the inhibition of the production of prostaglandins, which can even have beneficial immunosuppressive effects in chronic inflammatory processes. Since we speculated that these drugs could also act by protecting endogenous proteins against denaturation, we evaluated their effect on heat-induced denaturation human serum albumin (HSA) in comparison with several fatty acids which are known to be potent stabilizers of this protein. By the Mizushimas assay and a recently developed HPLC assays we observed that NSAIDs were slightly less active [$EC_{50}~10^{-5}-10^{-4}$ M] than FA and that the HPLC method was less sensitive but more selective than the turbidimetric assay, i.e. it was capable of distinguishing true antiaggregant agents like FA and NSAIDs from substances capable of inhibiting the precipitation of denatured protein aggregates. In conclusion, this survey could be useful for the development of more effective agents in protein condensation diseases like rheumatic disorders, cataract and Alzheimers disease.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.62-62
• /
• 2013

Magnesium alloys exhibit many attractive properties such as low density, high strength/weight ratio, high thermal conductivity, very good electromagnetic features and good recyclability. However, most commercial magnesium alloys require protective coatings because of their poor corrosion resistance. Attempts have been made to improve the corrosion resistance of the Mg alloys by surface treatments, such as chemical conversion coatings, anodizing, plating and metal coatings. Among them, chemical conversion coatings are regarded as one of the most effective and cheapest ways to prevent corrosion of Mg alloys. In this study, the effects of various $Zn^{2+}$ concentrations and pH levels on the formation of zinc phosphate conversion coatings (ZPCCs) on AZ31 magnesium alloy were investigated, and corrosion resistances of the coated samples were evaluated by immersion test and potentiodynamic polarization experiment. The corrosion resistance of the coated AZ31 samples was found to increase with increasing $Zn^{2+}$ concentration and the lowest corrosion rate was obtained for the samples coated at pH of 3.07, independent of $Zn^{2+}$ concentration. The best coatings on AZ31 were obtained at [$Zn^{2+}$] = 0.068 M and pH 3.07. At the conditions of [$Zn^{2+}$] = 0.068 M and pH 3.07, the formation and growth processes of ZPCCs on AZ31 Mg alloy are divided into four stages: formation of a dense layer, precipitation of fine crystals on the dense layer, growths of the inner and outer layers, and reorganization of outer crystalline layer.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.545-549
• /
• 2013

For the purpose of development of effective synthetic process of CHMI, a series of experiments were preformed on the preparation of CHMAIE, the intermediate of CHMI. For the first step, CHMA was synthesized by dropwise mixing of cyclohexylamine with maleic anhydride in toluene and 98.2% of theoretical CHMA was obtained by precipitation at $10^{\circ}C$ for 2 hours. The optimum reaction temperature of the esterfication, preparation reaction of CHAMIE from CHMA, was $68^{\circ}C$, and equilibrium conversion at optimum temperature was 98.5%. Equilibrium reaction time decreased with reaction temperature, and 4 hours was taken to reach equilibrium at optimum reaction temperature. Toluene in the final reaction product could be recovered by vacuum distillation. The recovery of toluene was increased with distillation temperature and 98% of toluene could be recovered at $55^{\circ}C$.

• Korean journal of applied entomology
• /
• v.45 no.2 s.143
• /
• pp.161-167
• /
• 2006

The citrus leafminer (CLM), Phyllocnistis citrella Stainton, is an oligophagous pest of Rutaceae family, especially Citrus spp. occurring in most worldwide citrus-growing areas. This study was conducted to evaluate a sex pheromone chemical of CLM, (Z,Z)-7,11-hexadecadienal (7Z,11Z-16:Al) in monitoring CLM by trap types, the diel activity and the influence of some weather factors on trap catch. CLM was well attracted on a trap baited 7Z,11Z-16:Al 1mg. Sticky wing trap was more effective than bucket trap. Most caught CLM were attracted at 2$\sim$6 a.m. regardless of season, and activity time of CLM was affected by sunrise time as well as sunset time. The trap catch of CLM was more influenced by wind velocity than temperature for activity time of CLM. The number of caught CLM was fallen at below 13$^{\circ}C$, but there was little effect for trap catch at over that temperature. The average wind velocity at over 2.0 m/sec made the number of caught CLM drop down. The precipitation did not affect the number of caught CLM when the average wind velocity was lower than at 2.0 m/sec.