• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.961-972
• /
• 2008

In 2004, total emissions of Greenhouse Gases(GHGs) in Korea was estimated to be about 590 million metric tons, which is the world's 10th largest emissions. Considering the much amount of nation's GHG emissions and growing nation's position in the world, GHG emissions in Korea should be reduced in near future. The CO$_2$ emissions from two sub-sections of energy sector in Korea, such as thermal power plant and industry section(including manufacturing and construction industries), was about 300 million metric tons in 2004 and this is 53.3% of total GHG emissions in Korea. So, the mitigation of CO$_2$ emissions in these two section is more important and more effective to reduce the nation's total GHGs than any other fields. In addition, these two section have high potential to qualitatively and effectively apply the CCS(Carbon Capture and Storage) technologies due to the nature of their process. There are several CCS technologies applied to these two section. In short term, the chemical absorption technology using amine as a absorbent could be the most effectively used. In middle or long term, pre-combustion technology equipped with ATR(Autothermal reforming), or MSR-$H_2$(Methane steam reformer with hydrogen separation membrane reactor) unit and oxyfuel combustion such as SOFC+GT(Solid oxide fuel cell-Gas turbine) process would be the promising technologies to reduce the CO$_2$ emissions in two areas. It is expected that these advanced CCS technologies can reduce the CO$_2$ avoidance cost to $US 8.5-43.5/tCO$_2$. Using the CCS technologies, if the CO$_2$ emissions from two sub-sections of energy sector could be reduced to even 10% of total emissions, the amount of 30 million metric tons of CO$_2$ could be mitigated.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• The Journal of Art Theory & Practice
• /
• no.4
• /
• pp.145-180
• /
• 2006

In Korea, nation and nationalism are undeniable justice, absolute virtue and moreover system of desire. From the late Chosun Dynasty when the Korean Peninsula had to survive from the critical situation of being the arena of competition, and through the colonial period under Japanese imperialism, nationalism became stronger as a logic of survival. The policy of seclusion under closed and exclusive nationalism that didn't recognize the world situation well enough, eventually gave more pain to the nation. Nationalism in colonial Korea which was as reformed nationalism and on the other hand, as intransigent, resisting nationalism. Since the purpose of this writing is not for clarifying the argument raised on Korean nationalism, there is no use mentioning how it went with the change of time. But we have to focus on the fact that the word 'nation' which appeared under the influence of popular revolution and capitalism meaning 'a group of people', was translated and understood as a racial concept for strengthening the unity of 'single-race nation with five thousand years' history. First of all, there is nationalism used to fortify the system. 'The Charter of National Education' and 'The Pledge of Allegiance' were ornaments to intensify the ruling ideology and dictatorship to militarize entire South Korea for 'settling Korean democracy' professed nationalism. Also, another ruling ideology armed with 'self-reliance' put North Korea into the state of hypnosis called nationalism. Nationalism, claiming 'nation' outwardly, but in reality, being an illuminating, instructing ideology isolating each other was indeed a body with two faces. This made 'nation' in Korea mysterious and objective through work such as. The statue commemorating patriotic forefathers' and picture of national records' in South Korea art. Nationalism used to strengthening the system encountered the magical 'single-race' and made 'ghost' being an extreme exclusion to other nations. We can find pedigreed pureness not allowing any mixed breeds from the attitude accepting western art -via Japan or directly- and making it vague by using the word Korean and Asia. There's nationalism as a resistant ideology to solidify the system on the other side. It came out as a way of survival among the Great Power and grew with the task of national liberation to became as a powerful force facing against the dictatorship dominating South Korea after the liberation. This discussion of nationalism as a resistance ideology was active in 1980s. In 1980, democracy movement against the dictatorship of 5th Republic originated from military power which came out suppressing the democratic movement in Gwangju, spread out from the intellects and the students to the labors, farmers and the civilians. It is well known that the 'Nation-People(Minjoong)'s Art Movement could come out under this social condition. Our attitude toward nationalism is still dual in this opening part of 21st century. On one hand, they are opposing to the ultra-nationalism but are not able to separate it from nationalism, and on the other, they have much confusion using it. In fact, in a single-race nation like Korea, the situation of being nationalism and jus sanguinis together can cause dual nationalism. Though nationalism is included in the globalization order, it is evidence that it's effective in Korea where there are still modern fetters like division and separation. In particular, in the world where Japan makes East Asia Coalition but exposed in front of nationalism, and China not being free from Sinocentrism, and American nationalism taking the world order, and Russia fortifying nationalism suppressing the minority race after the dissolution of socialism, Korean nationalism is at the point to find an alternative plan superior to the ruling and resisting ideology.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.2
• /
• pp.45-69
• /
• 2002

This study is designed to examine feasibility and limitation of outsourcing in cooking Western food in a hotel, to interpret importance of outsourcing(eg. outside order, outside procurement, outside supply) in a broad sense in order to reinforce the core capacity in the cooking department, and to know whether the cooking human power is efficiently used and how much the chefs recognize outsourcing of food materials. As many companies conduct restructuring to cut down its size, the reduction of human power led the Western food cooking in the hotel to lower core capacities, lower quality, and lower efficiency. In addition, the sagging morale of chefs undermined creativity. To change from the traditional kitchen to an economic kitchen needs to look into importance of outsourcing, cognitive attitude of chefs, relation with outside suppliers. Here suggests performance of positive changes in the structure The study examined feasibility and limitation of outsourcing in the hotel kitchen as well as chefs' cognitive attitude toward outsourcing of food materials to reinforce core capabilities of the hotel kitchen. 1. Companies of outsourcing are selected according to variability of price conditions, flexibility of contract conditions, popularity of the outsourcing company, and reputation of the outsourcing company. 2. The importance of outsourcing in the Western food cooking is divided into 4 factors such as standard of selecting outsourcing companies, policies of cooking manu, quality of cooking, and quantity of cooking. 3. The most feasible section in outsourcing of food materials is a process of kneading flour for bread, which shows that many Western-food chefs expect to put higher possibility of outsourcing on the kneading. In other words, when it comes to confectionery and bakery, there are many outside expert processing companies supplying high quality products. In the order of outsourcing feasibility, sauce is followed by processed vegetable, garnish of main dish, and soup. The least feasible section in outsourcing of food materials is appetize. Appetize includes a concept of a improvised dish and needs speed. Due to its color, freshness, and sensibility of taste, the appetize plays a key role in the Western food cooking. 4. When outsourcing is taken in place, the highest risk is to lower the inner cooking skills. Therefore chefs in charge of the Western food sequently recognize both internal problems including storage of cooking skills, unstability of layoffs, and loss of cooperation between departments, and external problems including inferior goods, difficulty of differentiating manu, delay of delivery, and expiration date. It shows that most of the Western food chefs consider risks of the internal problems at first. 5. A effective outsourcing needs appropriate selection of outsourcing companies, maintenance of credibility, active communication, check and management of hygiene. However regardless of their position or career, chefs in charge of the Western food have the same cognitive attitude toward selecting successful outsourcing companies after the outsourcing system is enforced. The core of cooking, or a final stage in the full process of so-called artistic cooking, should be treated with insourcing. Reduction of several cooking processes resulted in shortened cooking time, increased efficiency, faster cooking, cutting the waiting-lines, and finally more room for customers. The outsourcing system can reduce or eliminate the following processes in cooking: buying various food materials, checking, storing, preparing, and processing. Especially in the Western food cooking department of a hotel, the outsourcing system should be enforced to make an economic kitchen and to efficiently manage it. Wow it's time to change from the traditional kitchen to an economic kitchen in the hotel cooking department. For that, the cooking department should become a small but strong organization by outsourcing except its core work.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.4 no.2
• /
• pp.267-282
• /
• 1997

This study was to test the relationship between regular physical exercise and physical fitness in nursing students. These subjects were 54 volunteers who agreed with intention of this study and were composed of 24 active group and 30 non-active group. The selected physical fitness tests were grip strength and back strength for measuring muscular strength, sargent jump and standing broad jump for measuring power, push-up, sit-up, and heart rate for measuring total endurance, reaction time and side step test for measuring agility, stick test and stork stand for measuring balance, and trunk flexion and trunk extension for measuring flexibility. The conclusion acquired was as follows : 1) Grip strength had significant difference between active group of $29.5{\pm}5.9kg$ and non-active group $25.4{\pm}7.2kg$(t=2.283, p=.027), and back strength between active group of $54.1{\pm}13.7kg$ and non-active group of $44.7{\pm}15.7kg$(t=2.310, p=.025), 2) Sargent jump was lower with non-active group($44.9{\pm}8.6cm$) than with active group($45.3{\pm}8.8cm$), however, was not significant(t=.182, p=.856). Standing broad jump was significantly lower with non-active group of $161.3{\pm}28.7cm$ than with active group of $191.4{\pm}27.0cm$(t=3.939, p=.000). 3) Push-up showed significant difference between active group of $25.3{\pm}12.3times$ and non-active group of $11.5{\pm}5.1times$(t=5.572, p=.000), and sit-up between active group of $21.8{\pm}7.4times$ and non-active group of $17.1{\pm}5.8times$(t=2.631, p=.011), and heart rate between actvie group of $110.5{\pm}12.8$beats/min and non-active group of $121.5{\pm}9.5$beats/min(t=-3.648, p=.001). 4) Reaction time was significantly higher with non-active group of $.300{\pm}.051sec$ than with active group of $.341{\pm}.041sec$(t=-3.285, p=.002). Side step test was lower with non-active group($8.8{\pm}1.1times$) than with active group($9.2{\pm}1.2times$), however, was not significant (t=1.309, p=.196). 5) Stick test showed not significant difference between active group of $25.8{\pm}14.8sec$ and non-active group of $30.7{\pm}17.9sec$(t=-1.058, p=.295), and stork stand between active group of $4.5{\pm}3.2sec$ and non-active group of $3.7{\pm}3.5sec$(t=.918, p=.363). 6) Trunk flexion came out not significant difference between active group of $14.2{\pm}5.0cm$ and non-active group of $15.8{\pm}7.3cm$(t=-.927, p=.358), and trunk extension between active group of $67.1{\pm}6.5cm$ and non-active group of $67.3{\pm}6.6cm$(t=-.140, p=.889). 7) Power was shown to be significantly related to total endurance(r=.717, p=.000 ; r-.739, p=.000). 8) Total endurance was shown to be significantly related to agility(r=-.752, p=.000 ; r=.684, p=.000 ; r=-.664, p=.000 ; r=.598, p=.002 ; r=.864, p=.000 ; r=-.536, p=.007). These results suggest that regular physical exercise is effective in promoting and maintaining physical fitness. As the further study, it is necessary to reinvestigate the effect with more refined design.

• Journal of Environmental Policy
• /
• v.8 no.2
• /
• pp.83-118
• /
• 2009

Clean Development Mechanism(CDM) projects under the Kyoto Protocol have two objectives. One is to assist the Parties included in Annex I in achieving compliance with their quantified emission limitation and reduction commitments in cost-effective ways by allowing them to implement emission reduction projects in Non-Annex I countries and receive CERs, which will offset their reduction commitments. The other is to assist Parties not included in Annex I in achieving sustainable development and technology transfers through investments by Annex I countries. However, in reality, it is said that the former objective is achievable but the latter is not. In this light, this article suggests sustainability appraisal criteria applicable for Korea. Among various methodologies, we used the 'multi-attributes utility theory(MAUT)'; one of the 'multi-criteria analysis (MCA)' methodologies judged to be the most practical and relevant. Based on the guidelines of the MAUT methodology, we identified sustainability criteria that meet the guidelines. We took two tracks, the first to find the preferences of Korean experts, and the other to check foreign cases. In all, 37 preliminary criteria were suggested to Korean experts and each criterion was scored, from between 1 and 3, in terms of relevance, possibility of real improvement, easiness of data collection, and preferences. We combined foreign cases and the results of a survey conducted in Korea and selected 12 core criteria and 10 additional criteria. After that, all the criteria were converted into indicators. The indicators were applied to a CDM project for case study. We chose the "Sihwa Tidal Power Project", which is currently the biggest tidal power plant in the world. Twelve core indicators and 3 additional indicators were applied. In order to weight each indicator, the 'analytical hierarchy process (AHP)' was used. A total of 30 experts were asked to suggest weights and 21 answered. Among them, only 14 respondents were proven to meet the consistency ratio. We analyzed the 14 responses through Expert Choice and the CDM project was scored (+)53.082. In addition, sensitivity analysis was undertaken with the result of (+)44.667 to (+)65.522. As a result of this study, it was proven that this project would contribute to the sustainable development of Korea.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.184-203
• /
• 2020

The Confucian ruling class of the Joseon Dynasty regarded Buddhist rituals as "dangerous festivals." However, these Buddhist ceremonies facilitated transitions between phases of life from birth till death and strengthened communal unity through their joint practice of the rites. Ritual spaces were decorated with various utensils and objects that transformed them into wondrous arenas. Of these ornaments, Buddhist paintings served as the most effective visual medium for educating the common people. As an example, a painting of the Ten Kings of the Underworld (siwangdo) could be hung as a means to illustrate the Buddhist view of the afterlife, embedded in images not only inside a Buddhist temple hall, but in any space where a Buddhist ritual was being held. Demand for Buddhist paintings rose considerably with their use in ritual spaces. Nectar ritual paintings (gamnodo), including scenes of appeasement rites for the souls of the deceased, emphasized depictions of royal family members and their royal relatives. In Chinese paintings of the water and land ceremony (suryukjae), these figures referred to one of several sacred groups who invited deities to a ritual. However, in Korean paintings of a nectar ritual, the iconography symbolized the patronage of the royal court and underlined the historicity and tradition of nationally conducted water and land ceremonies. This royal patronage implied the social and governmental sanction of Buddhist rituals. By including depictions of royal family members and their royal relatives, Joseon Buddhist paintings highlighted this approval. The Joseon ruling class outwardly feared that Buddhist rituals might undermine observance of Confucian proprieties and lead to a corruption of public morals, since monks and laymen, men and women, and people of all ranks mingled within the ritual spaces. The concern of the ruling class was also closely related to the nature of festivals, which involved deviation from the routines of daily life and violation of taboos. Since visual media such as paintings were considered to hold a special power, some members of the ruling class attempted to exploit this power, while others were apprehensive of the risks they entailed. According to Joseon wangjo sillok (The Annals of the Joseon Dynasty), the Joseon royal court burned Buddhist paintings and ordered the arrest of those who created them, while emphasizing their dangers. It further announced that so many citizens were gathering in Buddhist ritual spaces that the capital city was being left vacant. However, this record also paradoxically suggests that Buddhist rituals were widely considered festivals that people should participate in. Buddhist rituals could not be easily suppressed since they performed important religious functions reflecting the phases of the human life cycle, and had no available Confucian replacements. Their festive nature, unifying communities, expanded significantly at the time. The nectar ritual paintings of the late Joseon period realistically delineated nectar rituals and depicted the troops of traveling actors and performers that began to emerge during the seventeenth century. Such Buddhist rituals for consoling souls who encountered an unfortunate death were held annually and evolved into festivals during which the Joseon people relieved their everyday fatigue and refreshed themselves. The process of adopting Buddhist rituals-regarded as "dangerous festivals" due to political suppression of Buddhism in the Confucian nation-as seasonal customs and communal feasts is well reflected in the changes made in Buddhist paintings.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.425-434
• /
• 2008

Arsenic contamination in soil and groundwater has recently been one of the most serious environmental concerns. This arsenic contamination can be originated from natural or anthropogenic sources. It has been well known that arsenic behavior in geo-environmental is controlled by various oxides or hydroxides, such as those of iron, manganese, and aluminum, and clay minerals. Among those, particularly, iron (oxy)hydroxides are the most effective scavengers for arsenic. For this reason, this study characterized arsenic adsorption of magnetite which is a kind of iron oxide in nature. The physicochemcial features of the magnetite were investigated to evaluate adsorption of arsenite [As(III)] and arsenate [As(V)] onto magnetite. In addition to experiments on adsorption equilibria, kinetic experiments were also conducted. The point of zero charge (PZC) and specific surface area of the laboratory-synthesized magnetite used as an arsenic adsorbent were measured 6.56 and $16.6\;g/m^2$, which values seem to be relatively smaller than those of the other iron (oxy)hydroxides. From the results of equilibria experiments, arsenite was much more adsorbed onto magnetite than arsenate, indicating the affinity of arsenite on magnetite is larger than arsenate. Arsenite and arsenate showed adsorption maxima at pHs 7 and 2, respectively. In particular, adsorption of arsenate decreased with increase in pH as a result of electrical repulsion caused by anionic arsenate and negatively-charged surface of magnetite. These results indicate that the surface charge of magnetite and the chemical speciation of arsenic should be considered as the most crucial factors in controlling arsenic. The results of kinetic experiments show that arsenate was adsorbed more quickly than arsenite and adsorption of arsenic was investigated to be mostly completed within the duration of 4 hours, regardless of chemical speciation of arsenic. When the results of kinetic experiments were fitted to a variety of kinetic models proposed so far, power function and elovich model were evaluated to be the most suitable ones which can simulate adsorption kinetics of two kinds of arsenic species onto magnetite.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.813-821
• /
• 2000

The engineering of satellite communication systems at frequencies above 10GHz requires a method for estimating rain-caused outage probabilities on the earth-satellite path. A procedure for predicting a rain attenuation distribution from a point rainfall rate distribution is, therefore, needed. In order to predict rain attenuation on the satellite link, several prediction models such as ITU-R, Global, SAM, DAH model, have been developed and used at a particular propagation condition, they may not be appropriate to a propagation condition in Korean territory. In this paper, a new rain attenuation prediction method appropriate to a propagation condition in Korea is introduced. Based on the results from ETRI measurements, a new method has been derived for an empirical approach with an identification on the horizontal correction factor as in current ITU-R method, and the vertical correction factor has been suggested with decreasing power law as a function of rainfall rate. This proposed model uses the entire rainfall rate distribution as input to the model, while the ITU-R and DAH model approaches only use a single 0.01% annual rainfall rate and assume that the attenuation at other probability levels can be determined from that single point distribution. This new model was compared with several world-wide prediction models. Based on the analysis, we can easily know the importance of the model choice to predict rain attenuation for a particular location in the radio communication system design.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.