• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.367-373
• /
• 2008

The natural products are used to be development of new antibacterial substances against human pathogenic bacteria. Adherence to the tooth surface by S. mutans is an important step in initiation of dental caries. This study was to examine antibacterial activity and anti-adhesive effect of Scutellaria baicalensis extract against S. mutans. Extracts of S. baicalensis were tested for antimicrobial activities by paper disc methods and radial diffusion assay methods, and bacterial adherence assay using 3 type of hydroxyapatite. The antibacterial level of ethyl acetate extract, IPK-3 on the growth of S. mutans was 125 mg/ml of minimum inhibitory concentration (MIC). The maximum growth of S. mutans in medium added with IPK-3 extract (50 mg/ml) was delayed to 30 hr, while the highest at 24 hr in control medium. The pH values of the control medium was 5.63 at 18 hr, but the media supplemented with IPK-3 extract was pH 6.50 at 12 hr. In adhesive inhibition assay, S. mutans was labelled with the fluorescent indicator DAPI and measured with fluorescence microscope. Adhesion of S. mutans on hydroxyapatite beads was inhibited by IPK-3 extracts. These results suggest that S. baicalensis extract can be used as an effective material for antibacterial activity and adhesive inhibition against S. mutans.

• Journal of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.469-478
• /
• 1976

Clinoptilolite zeolite samples were treated with hydrochloric acid, sulfuric acid and phosphoric acid of different strength and the adsorption characteristics and crystal structures of the original and acid-treated clinoptilolites were studied. By treating with hydrochloric acid, the adsorbed amount increased to 5-fold for nitrogen, to 3-fold for benzene, but for methanol no significant change was observed. As acid strength increased further, there were declines both in adsorption capacity and crystallinity. The results showed that the increase of adsorbed amount was caused by the rearrangement of the pore entrance and cation exchange. A method for determination of clinoptilolite content in natural mineral based on benzene adsorption on acid-treated sample is proposed. By this method, the original sample used in this study was found to contain approximately 40% of clinoptilolite. Using pulse technique in micro-catalytic reactor system, the catalytic activities of hydrochloric acid-treated clinoptilolites in cumene cracking and toluene disproportionation reactions were measured. For cumene cracking reaction, the maximum conversion was observed for the 0.5 N hydrochloric acid-treated sample. It is instructive to note that the maximum benzene adsorption was also observed for the sample treated with 0.5 N HCl. This suggest that the conversion rate was determined mainly by the rate of transport of reactants and the products through the pore structure. In the toluene disproportionation reaction, the same trend was observed. But the rate of deactivation was high for samples with strong acid sites. Since catalyst having higher activity was deactivated more easily, the conversion maximum was shifted to the sample treated with higher concentration of acid, -1N. The catalytic activity of $Ca^{2+} and La^{3+} ion exchanged samples for the toluene disproportion was much lower than that of acid-treated samples. Introduction of Ca^{2+} and La^{3+}$ into the pore structure apparently decreases the effective pore diameter of acid-treated clinoptilolite thus limiting the diffusion of reactants and products.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.167-172
• /
• 2000

The purpose of this study is to develop a transurethral liquid suppository containing prostaglandin $E_1\;(PGE_1)-loaded$ microemulsion, which undergoes a phase transition to gels at body temperature. The effects of oils, ethanol as solvent and HCl as pH-controlling agent on the physicochemical properties of liquid suppositories composed of poloxamer P 407, P 188 and carbopol was investigated. The stability of $PGE_1$ and release of $PGE_1$ from liquid suppository were evaluated. Oils such as Neobee and soybean oil significantly decreased the gelation temperature but increased the gel strength of liquid suppository due to their strongly binding with the components of liquid suppository base. However, ethanol slightly did the opposite. The pH of liquid suppositories hardly affected the gelation temperature and gel strength due to addition of very small HCl (0.005-0.01%). A liquid suppository [$PGE_1/P$ 407/P 188/carbopol/Neobee/ethanol/HCl (0.2/14/14/0.4/7/2/0.005%)], which had the gelation temperature $(34.2{\pm}0.6^{\circ}C)$ and gel strength $(31.35{\pm}4.37\;sec)$ suitable for liquid suppository system, was easily administered and not leak out from the body. About 60% of $PGE_1$ was released out within 2 h from this formulation. It was shown that the release of $PGE_1$ was proportional to the square root of time, indicating that $PGE_1$ might be released from the suppository by Fickian diffusion. It was stable at $4^{\circ}C$ for at least 2 months. The results suggest that transurethral liquid suppository containing prostaglandin $E_1-loaded$ microemulsion is thought to be a convenient, safe and effective dosage form for $PGE_1$. However, it should be further developed as a more convenient and stable dosage form for $PGE_1$.

• Journal of the Korean Society of Combustion
• /
• v.20 no.4
• /
• pp.34-41
• /
• 2015

Oxy-methane nonpremixed flames diluted with $CO_2$ were investigated to clarify impact of radiation heat loss and chemical effects of additional $CO_2$ to oxidizer stream on flame extinction. Flame stability maps were presented with functional dependencies of critical diluents mole fraction upon global strain rate at several oxidizer stream temperatures in $CH_4-O_2/N_2$, $CH_4-O_2/CO_2$, and $CH_4-O_2/CO_2/N_2$ counterflow flames. The effects of radiation heat loss on the critical diluent mole fractions for flame extinction are not significant even at low strain rate in nonpremixed $CH_4-O_2/N_2$ diffusion flame, whereas those are significant at low strain rate and are negligible at high strain rate (> $200s^{-1}$) in $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ counterflow flames. Chemical effects of additional $CO_2$ to oxidizer stream on the flame extinction curves were appreciable in both $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ flames. A scaling analysis based on asymptotic solution of stretched flame extinction was applied. A specific radical index, which could reflect the OH population in main reaction zone via controlling the mixture composition in the oxidizer stream, was identified to quantify the chemical kinetic contribution to flame extinction. A good correlation of predicted extinction limits to those calculated numerically were obtained via the ratio between radical indices and oxidizer Lewis numbers for the target and baseline flames. This offered an effective approach to estimate extinction strain rate of nonpremixed oxy-methane flames permitting air infiltration when the baseline flame was taken to nonpremixed $CH_4-O_2/N_2$ flame.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.89-101
• /
• 2015

Outbreaks of highly pathogenic avian influenza(HPAI) subtype H5N8 have occurred in Korea, January 2014 and it continued more than a year until 2015. And more than 5 million heads of poultry hads been damaged in 196 farms until May 2014. So, we studied the spatial, temporal and spatio-temporal patterns of the HPAI epidemics for understanding the propagation and diffusion characteristics of the 2014 HPAI. The results are expressed using GIS. Throughout the study period three epidemic waves occurred over the time. And outbreaks made three clusters in space. First spatial cluster is adjacent areas of province of Chungcheongbuk-do, Chungcheongnam-do and Gyeonggi -do. Second is Jeonlabuk-do Gomso Bay area. And the last is Naju and Yeongam in Jeollanam-do. Also, most of spatio-temporal clusters were formed in spatially high clustered areas. Especially, in Gomso Bay area space density and spatio-temporal density were concurrent. It means that the effective prevention activity for HPAI was carried out. But there are some exceptional areas such as Chungcheongbuk-do, Chungcheongnam-do, Gyeonggi-do adjacent area. In these areas the outbreak density was high in space but the spatio-temporal cluster was not formed. It means that the HPAI virus was continuing inflow over a long period.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.23-29
• /
• 2014

So far, the grouting using pressure injection has been extensively used to avoid adverse effects such as soil disturbance. Whereas, the pressure injection to the limitations of the diffusion range, so that the kinks would last injection of cement particles by introducing a frequency oscillation effect improved injection method have been recently developed. In this study, a pilot test was performed to compare injection effects of the both methods. The injections using both methods were tested on the embankment which consists of core clay and weathered soil. Subsequently, the injected volume, SPT N values, in-situ permeability and electrical resistivity were measured to compare their effects. The vibration method showed more effective permeation comparing with the pressure method. Also, it showed more homogeneously improved ground than the existing method. For SPT results, the vibration method presented increase of mean N value as much as 17.4 % comparing with the conventional method. Higher electrical resistivity was presented in case of injecting with vibration method and it indicated the injection was extensively completed. Finally, it is expected that the economic feasibility will be improved by decrease of drilling spacing, when the existing method is replaced with vibration method.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2020

Chloride ion, which penetrates into the cement composites from the outside, generally diffuses by the concentration gradient. Chloride ions are adsorbed by the chemical reaction with cement hydrates. Recent studies have shown that anion exchange resin (AER) powder can effectively adsorb the chloride ion in the cement composites, and thus, the cement composites containing AER have a high chloride adsorption capacity and a good resistance for chloride penetration. In this study, the chloride adsorption ability of the AER powder was investigated under the conditions of distilled water and calcium hydroxide saturated solution to determine if the AER powder is less effective to increase the chloride adsorption ability after grinding process. The chloride adsorption ability of AER powder was compared with the previous research about the chloride adsorption of AER bead. In addition, the compressive strength, chloride diffusion coefficient (using NT Build 492 method), and the chloride profile of cement mortar substituted with AER powder were investigated. There was no decrease in the chloride adsorption capacity of AER powder but increase in the kinetic property for chloride adsorption after the grinding process. The AER powder could absorb the chloride ion in the mortar quickly, and showed better chloride ion adsorption ability than the cement hydrates.

• Management & Information Systems Review
• /
• v.36 no.2
• /
• pp.207-221
• /
• 2017

The career management concept is changing rapidly in the career management field in recent years. It becomes very difficult to have a lifetime employment within the same firm. As there is career interruption that is pervasive phenomenon in the women's career management area, many academics and practitioners have been interested in it. The purpose of this study was to examine the influence of women's career-interruptions as the effective career strategy on career development actors and career success. To test the effects of the proactive career management of career-interrupted women, data were divided into two groups including proactive career management group and general career management group based on whether career-interruptions are voluntary or not. The results showed that the proactive development actors was significantly different depending on women's proactive career management and general career management group. First, proactive-career women were more self-directed to learn and have a significant impact on developing skills through training. Second, the career successes were not significantly different depending on and general career management group.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.405-412
• /
• 2009

The purpose of this study investigated the effect of Au coating on adhesion between porcelain matrix and metal substructure interface. Titanium, Ni-Cr alloy and Co-Cr alloy are well known as proper metal for the dental restorations. The success of a porcelain fused to metal (PFM) restoration depends upon the quality of the porcelain-metal bond. However, adhesion between dental alloys and porcelain is related to diffusion of oxygen during ceramic firing. The excessive oxidized layers make hard adhesion between dental alloy and ceramic. Ni-Cr and Co-Cr specimens were divided into test and a control group and Titanium specimens were divided into three test groups and a control group. Each group had 20 specimens. The adhesion characteristics of porcelain and metal with Au coating layer and without Au coating layer were observed with scanning electron microscopy(SEM). The adhesion was evaluated by a biaxial flexure test and volume fraction of adherent porcelain was determined by SEM/EDS analysis. Result of this study suggest that Au coating layer is effective barrier to diffuse oxide layer completely protect non-precious alloys from oxidation during the porcelain firing. The SEM photomicrographs of cross-section specimens showed a smooth interface between Au coating layer and metals and porcelain which suggested proper chemical bonding, and no gap, porosity were observed. The mode of failure was mainly adhesive for Ti tested specimens, but mixed failures with adhesive and cohesive were observed in Ni-Cr and Co-Cr specimens. The adhesion between non-precious metals and porcelain would not be improved by Au coating agent. However, It is suggested that the continuous study is required further investigation and development.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.360-366
• /
• 2011

The effect of cross-flow velocity and transmembrane pressure (TMP) on membrane fouling was observed from pilot-scale operation of thermophilic anaerobic membrane bioreactor (AnMBR) treating food waste leachate. It was found that fouling rate was reduced significantly as cross-flow velocity increased at constant TMP mode of operation while this effectiveness was more pronounced at lower TMP. Higher TMP resulted in less permeable fouling layer possibly due to compressibility of foulant material on membrane surface. Particle sizes of membrane concentrate ranged from 10 to $100{\mu}m$, implying that shear-induced diffusion enhance back transport of these particle sizes away from the membrane effectively. From the continuous operation of AnMBR, it was confirmed that shear rate played an important role in the reduction of membrane fouling. Membrane autopsy works at the end of operation of AnMBR showed clearly that both organic and inorganic fouling were significant on membrane surface. Surface shear by cross-flow velocity was expected to be less effective to remove irreversible fouling which can be mainly caused by the adsorption of organic colloidal materials into membrane pores.