• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.497-516
• /
• 2014

The ultimate carrying capacity of axially loaded welded square box section members made of medium and high strength steels (nominal yield stresses varying from 345 MPa to 460 MPa), with large width-to-thickness ratios ranging from 35 to 70, is analyzed by finite element method (FEM). At the same time, the numerical results are compared with the predicted results using Direct Strength Method (DSM), modified DSM and Effective Yield Strength Method (EYSM). It shows that curve a, rather than curve b recommended in Code for design of steel structures GB50017-2003, should be used to check the local-overall interaction buckling strength of welded square section columns fabricated from medium and high strength steels when using DSM, modified DSM and EYSM. Despite all this, EYSM is conservative. Compared to EYSM and modified DSM, DSM provides a better prediction of the ultimate capacities of welded square box compression members with large width-thickness ratios over a wide range of width-thickness ratios, slenderness ratios and steel grades. However, for high strength steels (nominal yield strength greater than 460 MPa), the numerical and existent experimental results indicate that DSM overestimates the load-carrying capacities of the columns with width-thickness ratio smaller than 45 and slenderness ratio less than 80. Further, for the purpose of making it suitable for a wider scope, DSM has been modified (called proposed modified DSM). The proposed modified DSM is in excellent agreement with the numerical and existing experimental results.

• Steel and Composite Structures
• /
• 제14권5호
• /
• pp.473-491
• /
• 2013

The primary objectives of this paper are to describe the buckling patterns and to determine the squash load of steel plate-concrete (SC) walls. The major variables in this study were the width-thickness (B/t) ratio and yield strength of surface steel plates. Six SC walls were tested, and the results include the maximum strength, buckling pattern of steel plates, strength of headed studs, and behavior of headed studs. Based on the test results, the effects of the B/t ratio on the compressive strength are also discussed. The paper also presents recommended effective length coefficients and discusses the effects of varying the yield strength of the steel plate, and the effects of headed studs on the performance of SC structures based on the test results and analysis.

• Computers and Concrete
• /
• 제12권6호
• /
• pp.819-829
• /
• 2013

The objective of this study is to determine whether or not the yield line theory, an effective method widely used for slabs made of ordinary concrete, can be used also for the reinforced concrete slabs made of high-strength concrete. Flexural behavior of simply supported slabs in three different sizes were investigated under concentrated load at mid-span. Additionally, behavior of high strength reinforced concrete slabs with 50 mm and 150 mm reinforcement spacings also studied. Failure loads, deflections, experimental and theoretical failure mechanisms were evaluated. The difference between the moments based on yield line theory and experimental moments varied between 1% to 3%. Experimental and analysis results revealed that yield line analysis could conveniently be employed in the analysis of high strength reinforced concrete slabs.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.17-23
• /
• 2015

This study was aimed to determine the effect of basal application of Effective Microorganisms (EM) on the grow and yield of cucumber. For treatments, the EM was applied to soil with fertilizer composed with $N-P_2O_5-K_2O$-manure (24.0-16.4-23.8-2,000kg) in the 1.0 strength (defined as EM+1S), 2/3 strength (defined as EM+2/3S), 1/2 strength (defined as EM+1/2S), without fertilizer (defined as EM), or only fertilizer in the 1.0 strength (defined as 1S). In result, there was no significant differences of organic substance content and pH with the EM treatment. While the EC (Electric conductivity) concentration was decreased, plant-available P (phosphorus) was markedly increased. Chlorophyll content was highest in the treatment of EM+standard application rate for both semi-forcing and retarding culture. In contrast, no significant difference was found in plant height and internode length under the fertilizer treatment. Weekly harvested number of cucumber was highest at the treatment of EM+standard application for the semi-forcing culture, while it was 3.6 at the EM+1/2 application for the retarding culture. Weekly yield was greatest at the EM+standard application treatment and decreased with the decrease of fertilizer application rate. In addition, weekly yield was significantly reduced in the treatment of EM. There was no significant difference in yields by production time with the fertilizer applications?. Yield was increased with temperature for the semi-forcing culture, while consistent pattern was maintained for the retarding culture.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.710-717
• /
• 2000

Tensile and fracture toughness tests of the cold-rolled STS 304 steel plate for membrane material of LNG storage tank were performed at wide range of temperatures, 11 IK(boiling point of LNG), 153K , 193K and 293K(room temperature). Tensile strength significantly increases with a decrease in temperature, but the yield strength is relatively insensitive to temperature. Elongation at 193K abruptly decreases by 50% of that at 293K, and then decreases slightly in the temperature range of 193K to 111K. Strain hardening exponents at low temperatures are about four times as high as that at 293K. Elastic-plastic fracture toughness($J_c$) and tearing modulus($T_{mat}$) tend to decrease with a decrease in temperature. The $J_c$ values are inversely related to effective yield strength in the temperature range of 111K to 293K. These phenomena result from a significant increase in the amount of transformed martensite in low temperature regions.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.325-335
• /
• 2024

Yielding dampers exhibit varying cyclic behavior based on their geometry. These dampers not only increase the energy dissipation of the structure but also increase the strength and stiffness of the structure. In this study, parametric investigations were carried out to explore the impact of angled U-shape damper (AUSD) dimensions on its cyclic behavior. Initially, the numerical model was calibrated using the experimental specimen. Subsequently, analytical equations were presented to calculate the yield strength and elastic stiffness, which agreed with the experimental results. The outcomes of the parametric studies encompassed ultimate strength, effective stiffness, energy dissipation, and equivalent viscous damper ratio (EVDR). These output parameters were compared with similar dampers. Also, the magnitude of the effect of damper dimensions on the results was investigated. The results of parametric studies showed that the yield strength is independent of the damper width. The length and thickness of the damper have the greatest effect on the elastic stiffness. Reducing length and width resulted in increased energy dissipation, effective stiffness, and ultimate strength. Damper width had a more significant effect on EVDR than its length. On average, every 5 mm increase in damper thickness resulted in a 3.6 times increase in energy dissipation, 3 times the effective stiffness, and 3 times the ultimate strength of the model. Every 15 mm reduction in damper width and length increased energy dissipation by 14% and 24%, respectively.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.211-219
• /
• 2005

Nowadays, various grades of high-strength steels are available. The application of ultra-high grades of steels for building structures, however, is limited only to the elements stressed under tension. The highest grade of steels generally used has a tensile strength of around 600N/mm2. Most research is focused on lower yield ratios of high strength steel in the inelastic range to ensure the stability of structures. In this paper, however, the possibility of an effective application of high strength steel with high yield ratio to building structures is discussed. An efficient structural system and a design method based on earthquake response analysis and experimental results are proposed.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.395-405
• /
• 2005

본 논문은 고항복비-고강도강의 효율적인 이용을 위하여 유강혼합구조 시스템의 실험결과를 요약한 것이다. 최근 건축구조물에서도 대형화 및 초고층화 되어감에 따라 사용강재에 대하여 높은 성능을 요구하게 되었고, 고강도강을 사용해야 하는 경우가 늘고 있다. 하지만 고강도강은 항복비가 높고 최대 응력시 변형도가 작고 탄성계수가 연강과 같다는 단점으로 인하여 수요가 증가하고 있지 못한 실정이다. 이러한 고항복비를 가지는 고강도강의 결점을 보완하고 효과적인 사용을 위해서는 새로운 구조시스템이 필요하다. 본 연구에서는 고항복비를 가지는 고강도강을 건축구조물에 효과적으로 적용할 수 있는 방안으로 유강혼합구조 시스템을 제안하고, 고강도강이 포함된 유강혼합기둥 실험을 통하여, 고강도강을 효율적으로 사용할 수 있는 가능성을 제시하고자 하였다. 내력비와 강성비를 포함할 수 있는 강요소 (stiff element)와 유요소 (flexible element)의 항복변형비를 변수로 하여, 유강혼합구조시스템 적용시 적절한 항복변형비를 찾고자 하였다. 실험결과 제안된 유강혼합구조시스템은 연강만으로 이루어진 시스템에 비해 높은 에너지 흡수능력을 보여주었고, 강요소에 대한 유요소의 항복변형비가 2.7~3.3일 때 가장 큰 에너지 흡수능력을 갖는 것을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제59권5호
• /
• pp.853-866
• /
• 2016

This paper examines a methodology for computing the probability of structural failure of reinforced concrete beams subjected to fire. The significant load variables considered are dead load, sustained live load and fire temperature. Resistance is expressed in terms of moment capacity with random variables taken as yield strength of steel, concrete class (or grade of concrete), beam width and depth. The flexural capacity is determined based on the design equations recommended in Indian standard IS456:2000. Simplified method named $500^{\circ}C$ isotherm method detailed in Eurocode 2 is incorporated for fire design. A transient thermal analysis is conducted using finite element software ANSYS$^{(R)}$ Release15. Reliability is evaluated from the initial state to 4h of fire exposure based on the first order reliability method (FORM). A procedure is coded in MATLAB for finding the reliability index. This procedure is validated with available literature. The effect of various parameters like effective cover, yield strength of steel, grade of concrete, distribution of reinforcement bars and aggregate type on reliability indices are studied. Parameters like effective cover of concrete, yield strength of steel has a significant effect on reliability of beams. Different failure modes like limit state of flexure and limit state of shear are checked.

• Structural Engineering and Mechanics
• /
• 제84권2호
• /
• pp.239-251
• /
• 2022

The use of lateral reinforcement in confined concrete columns can improve bearing capacity and deformability. The lateral responses of lateral reinforcement significantly influence the effective confining pressure on core concrete. However, lateral strain-axial strain model of concrete columns confined by lateral reinforcement has not received enough attention. In this paper, based on experimental results of 85 concrete columns confined by lateral reinforcement under axial compression, the effect of unconfined concrete compressive strength, volumetric ratio, lateral reinforcement yield strength, and confinement type on lateral strain-axial strain curves was investigated. Through parameter analysis, it indicated that with the same level of axial strain, the lateral strain slightly increased with the increase in the unconfined concrete compressive strength, but decreased with the increase in volumetric ratio significantly. The lateral reinforcement yield strength had slight influence on lateral strain-axial strain curves. At the same level of lateral strain, the axial strain of specimen with spiral was larger than that of specimen with stirrup. Furthermore, a lateral strain-axial strain model for concrete columns confined by lateral reinforcement under axial compression was proposed by introducing the effects of unconfined concrete compressive strength, volumetric ratio, confinement type and effective confining pressure, which showed good agreement with the experimental results.