• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.895-898
• /
• 2001

This paper presents an optimization cutting speed(OCS) program developed to improve the machining precision and tool life in high speed machining using ball end milling. This program optimized the cutting speed that is changing at any time in free surface machining of an automobile part like a connecting load die. The technique of optimization cutting speed makes the CAD/CAM-generated NC code go through a reverse post process, conducts cutting simulation, and obtain the effective tool diameter of the ball end milling. Then it changes the spindle revolution to within the range of critical cutting speed fit for the material of the workpieces depending upon the effective tool diameter. In this study, the machining precision and tool life were compared for the two connecting load dies processed using the general cutting method and the proposed optimization cutting speed technique, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.806-809
• /
• 2000

The factors which can improve tool life in machining are consisted of tool geometries, tool materials, coating methods. cutting environments, cutting conditions and so on. Cutting speed in cutting conditions is one of the important factors which can directly influence on the tool life. This paper deals the machinability which is concerned about the cutting direction and the tilt angle of fret form surface in hot die steel(STD I I). The NC datum were analysrd and the effective tool diameters were calculated according to the change of tilt angle the program which can continue the cutting speed with the change of spindle revolution is developed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6919-6922
• /
• 2014

Background: The cytological analysis of serous effusions is a common investigation and yields important diagnostic information. However, the distinction of reactive mesothelial cells from malignant cells can sometimes be difficult for the cytopathologist. Hence cost-effective ancillary methods are essential to enhance the accuracy of cytological diagnosis. The aim of this study was to examine the utility of nuclear morphometry in differentiating reactive mesothelial cells from malignant cells in effusion smears. Materials and Methods: Sixty effusion smears consisting of 30 effusions cytologically classified as malignant (adenocarcinomas) and 30 benign effusions showing reactive mesothelial cells were included in the study. ImageJ was used to measure the nuclear area, perimeter, maximal feret diameter, minimal feret diameter and the circularity. A total of ten representative cells were studied in each case. Results: Significant differences were found between benign and malignant effusions for the nuclear area, perimeter, maximal feret diameter and minimal feret diameter. No significant difference was found for circularity, a shape descriptor. Receiver operating characteristic (ROC) curve analysis revealed that nuclear area, perimeter, maximal feret diameter, and minimal feret diameter are helpful in discriminating benign and malignant effusions. Conclusions: Computerised nuclear morphometry is a helpful ancillary technique to distinguish benign and malignant effusions. ImageJ is an excellent cost effective tool with potential diagnostic utility in effusion cytology.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.66-72
• /
• 2014

Incremental forming is a relatively novel sheet forming process, in which parts can be formed without the use of dedicated dies. In this paper, the influence of the process parameters (tool diameter, step size, feed rate, existence of a die, forming methods, and kinds of tool path) on surface roughness in the case in which parts are processed by incremental forming was discussed. Al 1050 material is used in the experiments. A table of orthogonal arrays is used to design the experiments and the ANOVA method is employed to statistically analyze the results. The obtained results show that the process parameters of tool diameter, step size, and the existence of a die have a significant effect on the surface roughness, whereas the feed rate, forming methods and kinds of tool path are insignificant.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.240-244
• /
• 1999

This paper deals with the establishment of the cutting direction on inclined plane by using ball end mill. Ball-end milling is widely used for free form surface die and mold. In these machining, the cutting parts vary because the tool tip is hemisphere shaped. The cutting characteristics, such as cutting force, surface roughness and surface profile are varied according to the variation of cutting directions. The effective tool diameter was calculated on different tilt angles and tool-path. Tool life and cutting characteristics were estimated on variation of cutting directions in the same cutting speed. In this paper, the optimal cutting direction which can be applied 3-D sculpture surface cutting is suggested.

• Korean Journal of Materials Research
• /
• v.18 no.12
• /
• pp.635-639
• /
• 2008

In this paper, experimental studies of the regrinding of tungsten carbide (WC-Co) tools for high-speed machining were conducted. Regrinding and a subsequent evaluation test were carried out for a flat endmill tool with diameters of 10 mm and 3 mm using a CNC five-axis tool grinder and a CNC three-axis machining center. Tool wear on the two types of endmill tools increased as the cutting length increased, and the tool wear was not influenced by the regrinding state. In case of the micro endmill with a tool diameter of 3 mm, the effective regrinding time was determined for a flank wear threshold of 0.3 mm considering the tool life according to cutting length. The tool lives of the 10 mm and 3 mm endmill tools were increased by 80% and 72%, respectively. This conclusion proves the Feasibility of the recycling of tungsten carbide materials in the high-speed machining of high-hardened materials for industrial applications.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1681-1688
• /
• 2000

A dynamic model for the prediction of surface topography in high speed end milling process is developed. In this model the effect of tool runout, tool deflection and spindle vibration were taken in to account. An equivalent diameter of end mill is obtained by finite element method and tool deflection experiment. A modal parameter of machine tool is extracted by using frequency response function. The tool deflection, spindle vibration chip thickness and cutting force were calculated in dynamic cutting condition. The tooth pass is calculated at the current angular position for each point of contact between the tool and the workpiece. The new dynamic model for surface predition are compared with several investigated model. It is shown that new dynamic model is more effective to predict surface topography than other suggested models. In high speed end milling, the tool vibration has more effect on surface topography than the tool deflection.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.177-183
• /
• 2015

Incremental sheet metal forming is a manufacturing process to produce thin parts using sheet metals by a series of small incremental deformation. The process rarely needs dedicated dies and molds, thus, preparation time for the process is relatively short as to be compared to conventional metal forming. Spring back in sheet metal working is very common, which causes critical errors in dimensions. Incremental sheet metal forming is not fully investigated yet. Hence, incremental sheet metal forming frequently produces inaccurate parts. This paper proposes a method to minimize dimensional errors to improve shape accuracy of products manufactured by incremental forming. This study conducts experiments using an exclusive incremental forming machine and the material for these experiments are sheets of aluminum AL1015. This research defines a process parameter and selects a few factors for the experiments. The parameters employed in this paper are tool feed rate, tool diameter, step depth, material thickness, forming method, dies applied, and tool path method. In addition, their levels for each factor are determined. The plan of the experiments is designed using orthogonal array $L_8$ ($2^7$) which requires minimum number of experiments. Based on the measurements, dimensional errors are collected both on the tool contacted surfaces and on the non-contacted surfaces. The distances between the formed surfaces and the CAD models are scanned and recorded using a commercial software product. These collected data are statistically analyzed and ANOVAs (analysis of variances) are drawn up. From the ANOVAs, this paper concludes that the process parameters of tool diameter, forming depth, and forming method are the significant factors to reduce the errors on the tool contacted surface. On the other hand, the experimental factors of forming method and dies applied are the significant factors on the non-contacted surface. However, the negative forming method always produces better accuracy than the positive forming method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.3
• /
• pp.24-31
• /
• 2004

A successful on-line monitoring system for conventional machining operations has the potential to reduce cost, guarantee consistency of product quality, improve productivity and provide a safer environment for the operator. In fine-shape machining, typical signs of tool problems such as vibration, noise, chip flow characteristics and visual signs are almost unnoticeable without the use of special equipment. These characteristics increase the importance of automatic monitoring in fine-shape machining, however, sensing and interpretation of signals ar more complex. In addition, the shafts of the mini-tools break before the typical extensive cutting edge of the tool gets damaged. In this study, the existence of a relationship between the characteristics of the cutting force and tool usage was investigated, and tool breakage detection algorithm by LabVIEW was developed and the following results are obtained. It was possible to use a relative error compare which mainly used in established experiment and investigated tool breakage detection algorithm in time domain which can detect AE and cutting force signals more effective and accurate.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.37-44
• /
• 1993

Fuel injection system is an important tool in the exhaust emission and performance of a diesel engine. Effects of the fuel injection system in diesel combustion was investigated experimentally by measuring the performance and analyzing the combustion phenomena in a D.I. diesel engine. The selected injection parameters were nozzle opening pressure, nozzle projection length, and nozzle spray angle. From the measured results, it is shown that the fuel injection pipe diameter is an effective means to improve engine performance in a middle and high speed range and the 2 stage spring nozzle holder has the advantage of increasing the engine performance due to the initial injection pressure in a low speed range. It has been also shown that increasing nozzle opening pressure resulted in decrease in smoke, but increase in NO$_{x}$ from the engine.e.