• 한국융합학회논문지
• /
• 제8권7호
• /
• pp.295-304
• /
• 2017

본 연구의 목적은 관절가동술과 탄력테이핑을 무릎 관절염 환자에게 적용하여 기립균형에 미치는 즉각적인 영향을 알아보고자 한다. 무릎 관절염 환자 30명은 테이핑군, 관절가동술군, 관절가동술과 탄력테이핑 융합 적용군으로 10명씩 나누어 무작위 배치되었다. 기립균형능력 평가는 발바닥 압력 측정기를 이용하였고, 눈 뜬 상태와 눈 감은 상태에서 자세 동요, 이동거리, 평균속도를 평가하였다. 중재 직후 세 군 모두 눈 감은 상태에서 자세 동요에 유의한 개선이 있었고, 융합 적용군은 이동거리, 평균속도에서도 유의한 개선을 보였다. 하지만 세 군간 기립균형 능력에서는 유의한 차이는 없었다. 관절가동술과 테이핑 모두 눈 감은 상태에서 기립균형에 효과적인 방법이었고, 두 중재방법을 융합했을 때 다양한 균형 변수에 효과적인 것을 확인할 수 있었다. 따라서 무릎 관절염 환자에게 두 중재방법을 융합하여 적용할 것을 권고한다.

• PNF and Movement
• /
• 제17권2호
• /
• pp.215-222
• /
• 2019

Purpose: The objective of this study was to investigate whether augmented low-dye taping treatment, which consists of low-dye, reverse-six, and calcaneal-sling taping, is effective in alleviating the collapse of the medial longitudinal arch, which is used for physical balancing during one leg standing. Methods: The subjects comprised 27 students in their 20s whose navicular bone height was lowered by 10 mm or more when evaluated using the navicular drop test. Those with interference factors like deformities, fractures, or traumas were excluded. Frequency-division multiplexing was used to measure one leg standing, and the method to avoir the average each time after 3 times of measurement was applied. Results: Significant differences in the center of pressure (COP) path length, COP average velocity, and forefoot force were observed during left leg standing (p<0.05), but for right leg standing, only changes in forefoot force were noted. Conclusion: Based on the changes to the non-dominant leg in terms of COP path length, COP average velocity, and forefoot force, the immediate effect of augmented low-dye taping, which combines three types of anti-pronation taping, on one leg standing balance in people with flat feet was confirmed.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.665-675
• /
• 2022

The safety problems of giant hydraulic structures such as dams caused by terrorist attacks, earthquakes, and wars often have an important impact on a country's economy and people's livelihood. For the national defense department, timely and effective assessment of damage to or impending damage to dams and other structures is an important issue related to the safety of people's lives and property. In the field of damage assessment and vulnerability analysis, it is usually necessary to give the damage assessment results within a few minutes to determine the physical damage (crack length, crater size, etc.) and functional damage (decreased power generation capacity, dam stability descent, etc.), so that other defense and security departments can take corresponding measures to control potential other hazards. Although traditional numerical calculation methods can accurately calculate the crack length and crater size under certain combat conditions, it usually takes a long time and is not suitable for rapid damage assessment. In order to solve similar problems, this article combines simulation calculation methods with machine learning technology interdisciplinary. First, the common concrete gravity dam shape was selected as the simulation calculation object, and XFEM (Extended Finite Element Method) was used to simulate and calculate 19 cracks with different initial positions. Then, an LSTM (Long-Short Term Memory) machine learning model was established. 15 crack paths were selected as the training set and others were set for test. At last, the LSTM model was trained by the training set, and the prediction results on the crack path were compared with the test set. The results show that this method can be used to predict the crack propagation path rapidly and accurately. In general, this article explores the application of machine learning related technologies in the field of mechanics. It has broad application prospects in the fields of damage assessment and vulnerability analysis.

• 대한방사선치료학회지
• /
• 제13권1호
• /
• pp.38-46
• /
• 2001

Purpose : The aim of this study is to investigate the effect of tissue inhomogeneities when appling to contrast medium among Homogeneous, Batho and ETAR dose calculation method in RTP system. Method and Material : We made customized heterogeneous phantom it filled with water or contrast medium slab. Phantom scan data have taken PQ 5000 (CT scanner, Marconi, USA) and then dose was calculated in 3D RTP (AcQ-Plan, Marconi, USA) depends on dose calculation algorithm (Homogeneous, Batho, ETAR). The dose comparisons were described in terms of 2D isodose distribution, percent depth dose data, effective path length and monitor unit. Also dose distributions were calculated with homogeneous and inhomogeneous correction algorithm, Batho and ETAR, in each patients with different clinical sites. Results : Result indicated that Batho and ETAR method gave rise to percent depth dose deviation $1.5{\sim}2.7\%,\;2.3{\sim}3.5\%$ (6MV, field size $10{\times}10cm^2$) in each status with and without contrast medium. Also show that effective path lengths were more increase in contrast status (23.14 cm) than Non-contrast (22.07 cm) about $4.9\%$ or 10.7 mm (In case Hounsfield Unit 270) and these results were similary showned in each patient with different clinical site that was lung. prostate, liver and brain region. Concliusion : In conclusion we shown that the use of inhomogeneity correction algorithm for dose calculation in status of injected contrast medium can not represent exact dose at GTV region. These results mean that patients will be more irradiated photon beam during radiation therapy.

• 정보처리학회논문지C
• /
• 제16C권1호
• /
• pp.83-90
• /
• 2009

무선 센서 네트워크(Wireless Sensor Network : WSN)는 자율적으로 라우팅 경로를 구성하여 물리적으로 떨어진 지역의 데이터를 수집하는 무선망이다. 본 논문은 주기적으로 수집한 모든 데이터를 하나의 기지 노드로 전달하는 convergecast 환경에서 퓨전(fusion)을 반영한 라우팅 방법을 제안한다. 지금까지 대부분의 연구는 무퓨전(no-fusion)과 전퓨전(full-fusion)의 두 경우만을 다루었다. 제안하는 Fusion rate based Spanning Tree(FST)는 임의의 퓨전율 f ($0{\leq}f{\leq}1$)에서 총 전송 에너지 비용을 줄이는 라우팅 경로를 제공 한다. FST는 무퓨전(f = 0)과 전퓨전(f = 1)의 convergecast에서 각각 최적의 토폴로지인 최소 경로 트리(Shortest Path spanning Tree : SPT)와 최소 스패닝 트리(Minimum Spanning Tree : MST)를 제공하며, 임의의 f (0 < f < 1)에 대해서도 SPT나 MST보다 우수한 토폴로지를 제공한다. 시뮬레이션은 100-노드 WSN에서 모든 f ($0{\leq}f{\leq}1$)에 대해 FST의 총 길이가 평균적으로 MST보다 약 31%, SPT보다 약 8% 절약 됨을 보여준다. 따라서 우리는 FST가 WSN에서 매우 유용한 토폴로지임을 확인하였다.

• 한국전자파학회논문지
• /
• 제10권7호
• /
• pp.1118-1130
• /
• 1999

본 논문에서는 무선 채널 환경에서 원큰문제와 다중경로 페이딩에 의한 부호분할 다원접속(DS/FH CDMA) 시스템의 성능을 분석하였다. 고려되는 부호분할 다원접속 시스댐은 시스템의 성능을 향상시키기 위하여 최대비 합성 다이버시티 수신법과 BCH(Bose-Chau dhuri-Hocquenghem) 부호화 기법을 사용하였다. 유도한 오율식을 이용하여 부호분할 다원접속 시스댐의 성능을 구하여, PN 코드 길이(N). 호핑수(q) 다중 사용자의 수(J(). 다이 버시티 가지의 수(M). 부호화 율($\gamma$) 그리고 비트에너지 대 잡음전력비($E_b/N_o$)등을 함수로 하여 그래프로 나타내 고 분석하였다. 분석결과에 의하면 원근문제와 다중경로 페이딩의 영향을 억압하기 위해서는 DS 방식보다도 DS/FH 방식이 효율적임을 알 수 있었다. 그리고, MRC 다이버시티 기법이나 BCH 부호화 기법을 채용함으로써 큰 폭의 성능 개선을 얻을 수 있었다. 결과적으로 제안된 시스템의 구조는 원근문제와 페이딩이 존재하는 채덜에 서 음성 통신시스템으로서 적절하다고 예상된다.

• 전기학회논문지P
• /
• 제54권3호
• /
• pp.148-154
• /
• 2005

Various methods for analyze optical components which are necessary before the fabrication of optical circuit component and as its applications, designing method of Wavelength Division Multiplexer(WDM) filter using arrayed-waveguide grating(AWG) is paper. In the case of analyzing uniform optical waveguide, effective index method(EIM), harmonic expansion method are used, and in the case of non-uniform optical waveguide, beam propagation method(BPM) are used. In this paper, to use arrayed-waveguide grating as WDM filter of centered wavelength of $1.55{\mu}m$ and wavelength spacing of 0.8nm, all of the parameter of AWG is calculated by the HEM and the BPM using EIM. As a result of calculation, free spectral range is 12.8nm, focal length $9336.55{\mu}m$, path difference $129.36{\mu}m$ and the number of slab waveguide 91 when the distance of core center to center on row land circle is $20{\mu}m$.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.225-230
• /
• 2005

The proposed Triple-band Compact Chip Antenna using Coupled Meander line and stacked meander Structure for Mobile RFID/PCS/WiBro. The proposed antenna is designed to operate at 900, 1800, and 2350 MHz, and is realized by parasitic coupled and stacked a meander line. Meander lines are using extend length of effective current path more than monopole and contribute miniaturization. The coupled meander line controls the excitations of the Mobile RFID and PCS, stacked meander line controls the excitation of the WiBro. The proposed antenna size is $11mm\times22.5mm\times1mm$. The antenna supports 900MHz, 1800MHz and 2350MHz operations simultaneously with bandwidths of 33MHz, 230MHz and 100MHz, respectively. The proposed antenna gains are result of simulation to be -0.8dBi, 3dBi and 3.8dBi, respectively.

• 한국CDE학회논문집
• /
• 제1권2호
• /
• pp.150-157
• /
• 1996

The hob is considered as an effective gear cutting tool for achieving the various gears such as spur gear, helical gear, worm gear and so on. To enhance the productivity and precision of hobs and the competitive ability of domestic CNC hob relieving lathes, a CAM system for CNC hob relieving lathe needs to be realized. In this study, the CAM system is developed based on the personal computer and C language. Besides the automatic generation of CNC data, the developed CAM system has the various capabilities related to the generation of tool path, the cutting simulation for verifying the generated CNC data and forecasting the cutting time, the DNC operation for communicating the CNC data with CNC controller by RS232C port, and the estimation of undercut length for verifying the hob cutting conditions.

• 디지털콘텐츠학회 논문지
• /
• 제3권1호
• /
• pp.89-99
• /
• 2002

포화 경로 선정 알고리즘은 주로 전술적 응용 및 패킷 라디오 망에 유용한 경로 선정 알고리즘으로 알려져 있는데, 이유는 통화로 개설 시간이 짧고 경로 선정 테이블을 갖고 있지 않기 때문이다. 통신망 효율 면에서는 통제 메시지의 오버 해드로 인해 약점이 있기도 하다. 본 논문에서는 4개의 링크로 구성된 격자형 전술 회선 교환망에 두개의 우선 순위 음성 트래픽을 갖는 망을 고려하였다. 최소 1차 미분 길이를 갖는 경로를 이용하여 통화로 개설 시간 및 알고리즘 처리 부하를 증가 시키지 않으면서 회선망의 차단 확률을 향상 시켰다.