• Journal of Magnetics
• /
• v.19 no.1
• /
• pp.15-19
• /
• 2014

In this study, for 6-20 MeV electron beam energy occurring in a linear accelerator, the authors attempted to investigate the relation between the effective source-skin distance and the relation between the radiation field and the effective source-skin distance. The equipment used included a 6-20 MeV electron beam from a linear accelerator, and the distance was measured by a ionization chamber targeting the solid phantom. The measurement method for the effective source-skin distance according to the size of the radiation field changes the source-skin distance (100, 105, 110, 115 cm) for the electron beam energy (6, 9, 12, 16, 20 MeV). The effective source-skin distance was measured using the method proposed by Faiz Khan, measuring the dose according to each radiation field ($6{\times}6$, $10{\times}10$, $15{\times}150$, $20{\times}20cm^2$) at the maximum dose depth (1.3, 2.05, 2.7, 2.45, 1.8 cm, respectively) of each energy. In addition, the effective source-skin distance when cut-out blocks ($6{\times}6$, $10{\times}10$, $15{\times}15cm^2$) were used and the effective source-skin distance when they were not used, was measured and compared. The research results showed that the effective source-skin distance was increased according to the increase of the radiation field at the same amount of energy. In addition, the minimum distance was 60.4 cm when the 6 MeV electron beams were used with $6{\times}6$ cut-out blocks and the maximum distance was 87.2 cm when the 6 MeV electron beams were used with $20{\times}20$ cut-out blocks; thus, the largest difference between both of these was 26.8 cm. When comparing the before and after the using the $6{\times}6$ cut-out block, the difference between both was 8.2 cm in 6 MeV electron beam energy and was 2.1 cm in 20 MeV. Thus, the results showed that the difference was reduced according to an increase in the energy. In addition, in the comparative experiments performed by changing the size of the cut-out block at 6 MeV, the results showed that the source-skin distance was 8.2 cm when the size of the cut-out block was $6{\times}6$, 2.5 cm when the size of the cut-out block was $10{\times}10$, and 21.4 cm when the size of the cut-out block $15{\times}15$. In conclusion, it is recommended that the actual measurement is used for each energy and radiation field in the clinical dose measurement and for the measurement of the effective source-skin distance using cut-out blocks.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.2 s.109
• /
• pp.83-91
• /
• 2005

The purpose of this study is to analyze the arrangement of parks, in whole city level by using park's effective distance and to find the accessibility obstacles in case of using parks, in boundary of each parks' effective distance, so that to show how to improve communities' usage of city parks. The 8 cities in Gyeonggi-do and analysed the effective distance of parks. To find the accessibility obstacles in the boundary of parks' effective distance, 1) we choose 18 sample parks and extract obstacles - wide road, rail road, river- in interior and verify it by field survey and asking the park user's residents directly. The main findings of this study can be summarized as follows: First, Ansan city and Goyang city are only satisfied with the minimal city parks size standard, so that the rest 6 cities are lack of quantities which residents can use. The result of analyzing effective distance in whole city level, parks are mainly designated in new-town, so that most cities which have old-towns have very poor park systems to use. Because Ansan city is new-planned city, it is very effective arrangement in park systems exceptionally. Second, $96.2\%$ of park users' are living in the area which was easy to gain access not intercepted by wide road, rail road or river. Third, therefore at the stage of planning park, effective distance and resident's accessibility as well as park's supply quantitatively are needed to be considered. In addition, selection of location and elevation of resident's safety and accessibility through making a plan must be reflected. In the low accessibility area, the program to improve park's accessibility and amenity - like making small park or pocket park, linking parks with resident-friendly road etc.- has to be investigated.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1-6
• /
• 2004

In this study, the intrinsic static/dynamic fracture toughness of Al 7175=T74 is evaluated from the apparent static/ dynamic toughness of notched specimen, The critical average stress fracture model is suggested to establish the relationship to predict the intrinsic fracture toughness from the apparent fracture toughness of a notched specimen. The critical average stress fracture model is established using the relation between the notch root radius and the effective distance calculated by finite element analysis. Also, effective distance is applied to estimate the failure criterion for the combustion pipe with notch. It is conclude that the true fracture toughness can be estimated from test results of apparent fracture toughness measured by using a notched specimen. Also, the effective In this study, the intrinsic static/dynamic fracture toughness of Al 7175=T74 is evaluated from the apparent static/ dynamic toughness of notched specimen, The critical average stress fracture model is suggested to establish the relationship to predict the intrinsic fracture toughness from the apparent fracture toughness of a notched specimen. The critical average stress fracture model is established using the relation between the notch root radius and the effective distance calculated by finite element analysis. Also, effective distance is applied to estimate the failure criterion for the combustion pipe with notch. It is conclude that the true fracture toughness can be estimated from test results of apparent fracture toughness measured by using a notched specimen. Also, the effective distance can be used to evaluate the failure criterion of structure with notch.

• Journal of the Korean Institute of Educational Facilities
• /
• v.4 no.2
• /
• pp.5-12
• /
• 1997

Distance learning is becoming recognized as the key to meeting the needs of more people on more subjects with cost-effective way. The purpose of this paper was to review the literature and current information related to distance education. The topics include, the characteristics of distance education, definitions of distance education, various applications of distance education, and needs of distance education in our society. This paper focused on lastest technologies of distance education such as two-way videoconferencing, e-mail, and on-line classroom. Suggestions for the effective implementation in our educational environments that include, proper teacher training and as an interactivity of the distance education program were discussed.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.6
• /
• pp.661-670
• /
• 2010

Although many studies have suggested that introducing the distance learning method, including Web-based learning, to a practice class is effective, studies applying the distance learning method to subjects who are practicing cooking are rare. The purpose of this study was to determine the perception of the distance learning method, the degree of computer use, and the use of distance learning by college students with cuisine-related majors to practice cooking. The results showed that most students used the distance learning method, and that the method was positively perceived, as it was a great aid in learning. Most of the cooking information was obtained through the internet, and the most effective learning media for practicing cooking was "e-learning" using a computer. The most effective learning method for those who were practicing cooking was a "face-to-face learning method", because face-to-face type of teaching and learning was most universally recognized. Most of the students surveyed responded that using the distance learning method was a positive experience, indicating that cyber lectures could be applied at more universities for subjects practicing cooking.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.45-53
• /
• 2006

This paper proposes a method for an effective intelligent route decision for automatic moving robots(AMR) using a 2D spatial map of a stereo camera system. In this method, information about depth and disparity map are detected in the inputting images of a parallel stereo camera. The distance between the automatic moving robot and the obstacle is detected, and a 2D spatial map is obtained from the location coordinates. Then the relative distances between the obstacle and other objects are deduced. The robot move automatically by effective and intelligent route decision using the obtained 2D spatial map. From experiments on robot driving with 240 frames of stereo images, it was found that the error ratio of the calculated distance to the measured distance between objects was very low, 1.52[%] on average.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.2
• /
• pp.2980-3001
• /
• 1973

Nozzle is a part of sprayer and is consists of several elements; swirl plate, vortexchamber, cap and body. The travelling distance of sprayed particles is important in the wide reach nozzle. The factors to influence the travelling distance of the sprayed particles may be the helical angle of swirl plate, the distance of vortex hamber, the slope and the size of cap hole. The study was conducted to examine the effects of these factors on the travelling distance. The results of this study are summarized as follows; 1) There was higher positive correlation(+0.96) between the maximum travelling distance for which amount of sprayed particles was 5cc/cm min. and centro-position of the travelling distance. 2) There was a higher positive correlation(+0.85) between total discharge of sprayed particles and the centro-position of the travelling distance. 3) Main effects and interaction effects of helical angle, pressure, vortex chamber distance and cap slope were significantly affected the travelling distance of sprayed particles. 4) Main effects of helical angle, pressure and cap slope were especially highly significant to influence the travelling disance. 5) Helical angle, pressure, vortex chamber distance and cap slope influenced spraying forward velocity of dise hole, among which cap slope and pressure of nozzle was the most important factors. 6) Effect of change of helical angle on the travelling distance of sprayed particles, was generally a quadratic, the least value of the distance being showed about $45^{\circ}$ and the largest at about $15^{\circ}\;and\;55^{\circ}$, the decreasing rate of the change between $15^{\circ};and\;25^{\circ}$ was very small. 7) Effect of change of pressure on the travelling distance sprayed particles was generally a linear, the increasing rate of the charge was about 1.68, which was the most effective compared to the change of the other factors. 8) Effect of change of vortex chamber distance on the spraying distance was also generally a linear, the increasing rate being about 0.16, which was the least effective. 9) Effect of change of cap slope on the travelling distance was also generally a linear, the increasing rate was about 0.61 and its effect was about medium.

• Journal of the Korean Society of Food Culture
• /
• v.26 no.3
• /
• pp.249-260
• /
• 2011

The current research aims to verify whether distance learning can be adopted in practical cooking class for Korean foods in a two-year college. The distance learning education can be a supplementary method to the traditional cooking class. The face-to-face teaching method and the distance learning method were compared in order to determine which of the one is more effective teaching method in the practical cooking class. The results of the present experimental study were analyzed based on the participant's learning expectation and satisfaction, the evaluation of the experimental process, and the academic performance. The results of this study showed that the participants in the face-to-face class evaluated their class experience higher than those in the distance learning class with respect to the participant's learning expectation and satisfaction, and the evaluation of the experimental process. On the contrary, regarding the academic performance, the participants in the distance learning class showed higher scores than those in the face-to-face class. The end result supports the claim that the distance learning method is more effective in the participants for gaining cooking knowledge.

• Journal of Biosystems Engineering
• /
• v.18 no.2
• /
• pp.100-109
• /
• 1993

The aim of this study was to provide the reasonable data for design of the nozzle which produces finer droplets on the same level of the effective travel distance or which transports droplets to the farther target on the reasonable atomization in comparison with the commercial nozzles being used much in Korean rural areas. Newly designed twin-fluid atomizers with some commercial nozzles were tested in this study, and their results were as follows : 1. The characteristics of the spray deposit distribution of No.1 nozzles for farther target were nearly same in the near or nearer travel distance less than 8m. Therefore it was reasonable to combine the characteristics of the spray deposit distributions of No.2 and No.3 nozzles to those of No.1 nozzle. 2. The effective travel distance was increased with increase of the sectional area of the jet ligament, and the maximum effective travel distance was reached to about 17m. 3. The droplet size was increased with increase of the sectional area of the jet ligament, and the maximum droplet size was produced in the front of the point of the maximum spray deposit distribution. 4. The atomization was excellent in the twin-fluid atomizer in comparison with the hydraulic atomizer and also the effective travel distances were nearly same level in both atomizers.

• Transactions of Materials Processing
• /
• v.30 no.5
• /
• pp.226-235
• /
• 2021

The strain aging behavior of a low carbon dual phase steel was examined in two conditions: representing room temperature strain aging (100 ℃ × 1 hr after 7.5 % prestrain) and bake hardening process (170 ℃ × 20 min after 2 % prestrain), basing on carbon effective diffusion and dislocation distribution. The first principle calculations revealed that (Mn or Cr)-vacancy-C complexes exhibit the strongest attractive interaction compared to other complexes, therefore, act as strong trapping sites for carbon. For room temperature strain aging condition, the carbon effective diffusion distance is smaller than the dislocation distance in the high dislocation density region near ferrite/martensite interfaces as well as ferrite interior considering the carbon trapping effect of the (Mn or Cr)-vacancy-C complexes, implying ineffective Cottrell atmosphere formation. Under bake hardening condition, the carbon effective diffusion distance is larger compared to the dislocation distance in both regions. Therefore, formation of the Cottrell atmosphere is relatively easy resulting in to a relatively large increase in yield strength under bake hardening condition.