• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.549-554
• /
• 2021

Precise 3D road geospatial information is the basic infrastructure for autonomous driving and is essential data for safe autonomous driving. MMS (Mobile Mapping System) is being used as equipment for road spatial information construction, and related research is being conducted. However, there are insufficient studies to analyze the effect of the baseline reference point distance, which is an important factor in the accuracy of the MMS outcome, on the accuracy of the outcome. Therefore, in this study, the accuracy of the data acquired using MMS by reference point distance was analyzed. Point cloud data was constructed using MMS for the road in the study site. For data processing, 4 data were constructed considering the distance from the reference point for MMS data, and the accuracy was analyzed by comparing the results of 12 checkpoints for accuracy evaluation. The accuracy of the MMS data showed a difference of -0.09 m to 0.11 m in the horizontal direction and 0.04 m to 0.19 m in the height direction. The error in the vertical direction was larger than that in the horizontal direction, and it was found that the accuracy decreased as the distance from the reference point increased. In addition, as the length of the road increases, the distance from the reference point may vary, so additional research is needed. If the accuracy evaluation of the method using multiple reference points is made in the future, it will be possible to present an effective method of using reference points for the construction of precise road spatial information.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.90-99
• /
• 2016

Forecasting of box office performance after a film release is very important, from the viewpoint of increase profitability by reducing the production cost and the marketing cost. Analysis of psychological factors such as word-of-mouth and expert assessment is essential, but hard to perform due to the difficulties of data collection. Information technology such as web crawling and text mining can help to overcome this situation. For effective text mining, categorization of objects is required. In this perspective, the objective of this study is to provide a framework for classifying films according to their characteristics. Data including psychological factors are collected from Web sites using the web crawling. A clustering analysis is conducted to classify films and a series of one-way ANOVA analysis are conducted to statistically verify the differences of characteristics among groups. The result of the cluster analysis based on the review and revenues shows that the films can be categorized into four distinct groups and the differences of characteristics are statistically significant. The first group is high sales of the box office and the number of clicks on reviews is higher than other groups. The characteristic of the second group is similar with the 1st group, while the length of review is longer and the box office sales are not good. The third group's audiences prefer to documentaries and animations and the number of comments and interests are significantly lower than other groups. The last group prefer to criminal, thriller and suspense genre. Correspondence analysis is also conducted to match the groups and intrinsic characteristics of films such as genre, movie rating and nation.

• Journal of Korean Academy of Nursing Administration
• /
• v.16 no.3
• /
• pp.250-258
• /
• 2010

Purpose: The purpose of this study is to examine the effective factors of organizational commitment among hospital nurses. Method: The subjects were 250 registered nurses working in 3 hospitals in Busan. Data were obtained by self-reported questionnaires from the 10th of June to 30th of June, 2009. Data were analyzed by frequency and percentage, t-test, ANOVA and Sheffe's test and stepwise multiple regression. Result: Mean of job satisfaction was $60.56{\pm}9.25$ (range of scale: 20-100), internal marketing was 69.49 (range of scale: 25-125), job stress obtained $100.60{\pm}17.93$ (range of scale: 45-180), and organizational commitment got $47.78{\pm}6.84$ (range of scale: 15-75). The extent of the organizational commitment had differences according to the age (F=3.300, p=.039), educational level (F=3.21, p=.042), religion (F=3.30, p=.021), position (F=5.837, p=.003), and career length (F=2.642, p=.035). The influencing factors in organizational commitment of hospital nurses were job satisfaction, internal marketing, and age. $R^2$=.503. The job satisfaction has the highest significant predictor of organizational commitment. Conclusion: The influencing factors on organizational commitment were job satisfaction, internal marketing and age. Thus it is needed to improve the job satisfaction and internal marketing of hospitals' nurses and to provide care and support to younger nurses.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.3
• /
• pp.4195-4205
• /
• 1976

The purpose of this study is to evaluate the existing methods for calculating or estimating the consumptive use (Evaportranspiration) of any agricutural development project area. In determing the consumptive use water in the project area, there will require the best way for estimating irrigation requirement. Many methods for computing the evaportranspiration have been used, each of them with its merits and demerits at home and abroad. Some of these methods are listed as follows: 1.The Penman's formula 2.The B1aney-Criddle method 3.The Munson P.E. Index method 4.The Atmometer method 5.The Texas Water Rights Commission (TWRC) method 6.The Jensen-Haise method 7.The Christiasen method Therefore, the authors will introduce the more widely used method for calculating Consumptive Use by G.H. Hargreaves. The formula is expressed in the form Ep= K·d·T (1.0-0.01·Hn) Hn=1.0+0.4H+0.005H2. This method was adopted for the first time to determine the Irrigation requirements of Ogseo Comprehensive Agricultual Development project (Benefited area:100,500ha) in Korea. This method is presented in somewhat greater detail than the others. Formula is given for the computation of evaportranspiration (with various levels of data availability) Sampel computation of irrigation requirements for Ogseo irrigation project is included. The results and applied materials are summarized as follows. 1. In calculating the Hargreaves formula, the mean temperature relative, humidity, length of day, and percentage of sunshine from three stations of Iri, Jeonju, and Gunsan were used. 2. Monthly evaporation values were calculated by using the formula. 3. Meteological data from the three stations records for the ten years (1963∼1972) were used. 4. The annual irrigation requirements is 1,186mm per hectare, but the case to consider effective rainfall amount takes the annual irrigation demand being 700mm per hectare.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.3
• /
• pp.4184-4194
• /
• 1976

Located in the southwestern part of Korea, the Yong San Gang river flows generally northeast to southwest, and because of the specific location, topography and climate, the basin area is subject to recurrent drought and flood damages. To eliminate the cause of such damages and ensure an increase in the farm income by means of effective irrigation supply and increased cropping intensity, efforts are being made to speed up implementation of an integrated agricultural development project which would include construction. of an estuary dam and irrigation facilities as well as land development and tidal reclarnation. In formulating a basin development project plan, it is necessary to study a series of long-term runoff data. The catchment area at the proposed estuary damsite is 3,471$\textrm{km}^2$ with the total length of the river channel up to this point reaching 138km. An analysis of runoff in this area was carried out. Rainfall was estimated by the Thiessen Network based on records available from 15 of the rainfall observation stations within the area. Out of the 15 stations, Kwang Ju and Mok Po stations were keeping long-term precipitation records exceeding some 60 years while the others were in possession of only 5-10 years records. The long-term records kept by those stations located in the center of the basin were used as base records and records kept by the remaining stations were supplemented using the coefficient of correlation between the records kept by the base stations and the remainder. The analyses indicate that the average annual rainfall measured at Kwang Ju during 1940-1972 (33 years) amounts to 1,262mm and the areal rainfall amounts to 1,236mm. For the purpose of runoff analysis, 7 observatories, were set up in the middle and lower reaches of the river and periodic measurements made by these stations permitted analysis of water levels and river flows. In particular, the long-term data available from Na Ju station significantly contributed to the analysis. The analysis, made by 4-stage Tank method, shows that the average annual runoff during 1940-1972 amounts to 2,189 million ㎥ at the runoff rate of 51%. As for the amount of monthly runoff, the maximum is 484.2 million ㎥ in July while the minimum is 48.3 million ㎥ in January.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.9
• /
• pp.93-116
• /
• 1998

In the 21st century the service industry, particularly the hospitality industry, has the potential to develop into its golden age. In preparation for this hotels must maximize management proficiency by introducing reasonable and scientific systems into their current operations. The hotel industry takes it for granted that it can meet the final business goal by way of effective management of human resources. However, comprehensive papers on the subject of employee satisfaction have not appeared or been presented in Korean business studies. And although papers from abroad have touched on the subject they are not focused on the specialized domain of human resources as it applies to the comprehensive matters relating to job satisfaction as a corelationship to business success. This study focuses on some problems that must be overcome in achieving business objectives while striving at the same time to maintain satisfaction. The purpose of this study is to find the factors that measure employee job satisfaction in the hotel industry. To establish the purpose I reviewed the definition of the job satisfaction. An antecedent study of job satisfaction and Questionnaires were used to acquire data, specifically, hotel employees were selected randomly from the six super-deluxe hotels in Seoul to respond to thorough questionnaires. As a result of the study on the variables of Sex, Position, Length of Service, Opportunity for Promotion, Working Conditions, Wages and Hotel Situation. As a whole, promotional opportunity, wages and working conditions were frequently cited as negative factors in the responses. A comprehensive approach that includes improving wages and that reflects management's sincere concern with the working conditions of the employees is urgently needed. Hotel management that is willing to examine employee satisfaction periodically and provide proper solutions can prevent dissatisfied employees from separating from their jobs. This study has some limitation in that it is restricted geographically and in research method. That is, only six super-deluxe hotels in Seoul were selected as the subject of study and only the questionnaire method of obtaining data was used out of various available research methods.

• Journal of KIISE
• /
• v.41 no.11
• /
• pp.927-934
• /
• 2014

In this paper, we propose an effective method for recognizing daily human activities from a stream of three dimensional body poses, which can be obtained by using Kinect-like RGB-D sensors. The body pose data provided by Kinect SDK or OpenNI may suffer from both the view variance problem and the scale variance problem, since they are represented in the 3D Cartesian coordinate system, the origin of which is located on the center of Kinect. In order to resolve the problem and get the view-invariant and scale-invariant features, we transform the pose data into the spherical coordinate system of which the origin is placed on the center of the subject's hip, and then perform on them the scale normalization using the length of the subject's arm. In order to represent effectively complex internal structures of high-level daily activities, we utilize Hidden state Conditional Random Field (HCRF), which is one of probabilistic graphical models. Through various experiments using two different datasets, KAD-70 and CAD-60, we showed the high performance of our method and the implementation system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.2
• /
• pp.22-30
• /
• 1986

It is very important for a navigator on bridge to know the maneuverability of his ship sufficiently at sea. Generally, the data of a turning circle test have long been used to study and evaluate the maneuverability of a ship. But referring only the data of the turning circle test method, he can not evaluate his ship's maneuvering characteristics sufficiently. So nowaday the test method added Z test to turning circle test for more detail references is considered to be desirable. In this paper, the authors performed PAL test and Z test together in order to study the maneuverability of M. S.Pusan 403, training ship of the National Fisheries University of Pusan. According to the results of PAL test, the rudder effect in port rudder angle of the M. S. Pusan 403 was found to be more effective than that in starboard one, because her changing amounts of angular velocity, turning radius and tangent speed in port rudder angles were found to be larger than those of them in starboard rudder one in unsymmetry. The relation between her drift angle(.8) and rudder angle (0) was found to be changing with .8=0.640 in direct proportion. As it appeared that her calculated K'-values were smaller than the standard K'-values of different kinds of ships in accordance with her Z test, her turning ability was found to be lower. The running distance of a turn in her 10$^{\circ}$ Z test was about 8.3 times her own length and was found not to be exceeded the standard maneuvering distance, therefore she was considered to have good maneuverabilities synthetically.

• Smart Structures and Systems
• /
• v.22 no.3
• /
• pp.335-340
• /
• 2018

The behavior of concrete slabs in composite beam with C and L shaped angle shear connectors has been studied in this paper. These two types of angle shear connectors' instalment have been commonly utilized. In this study, the finite element (FE) analysis and soft computing method have been used both to present the shear connectors' push out tests and providing data results used later in soft computing method. The current study has been performed to present the aforementioned shear connectors' behavior based on the variable factors aiming the study of diverse factors' effects on C and L shaped angle in shear connectors. ANFIS (Adaptive Neuro Fuzzy Inference System), has been manipulated in providing the effective parameters in shear strength forecasting by providing input-data comprising: height, length, thickness of shear connectors together with concrete strength and the respective slip of shear connectors. ANFIS has been also used to identify the predominant parameters influencing the shear strength forecast in C and L formed angle shear connectors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1295-1305
• /
• 1999

In this paper, we present the implementation and performance analysis of H.324M mobile multimedia terminal which s under standardization. The H.324M is the mobile extension of H.324 which is the standard for low bit rate multimedia terminals operating over GSTN. For H.324M, the multiplexing protocol (H.223) of H.324 is enhanced to protect data from the transmission errors over mobile channels. The multiplexing protocol of H.324M is classified into Levels 0, 1, 2, and 3 depending on the level of error protection. Each Level is analyzed according to different types of the data loss elements. Simulation results show that the loss caused by the corrupted flag and header produces the most serious performance degradation. Levels 1 and 2 which protect the header and flag are effective in reducing the total loss. Furthermore, the optimal flag length and threshold value for Levels 1 and 2 are determined.