• Quality Improvement in Health Care
• /
• v.9 no.2
• /
• pp.116-133
• /
• 2002

Background : It is very common in Korea to take care of non-acute patients in an acute setting, due to the lack of long-term facilities. Long term hospitalization increase medical expenses and decreases the bed utilization, which can affect the urgent and emergent admissions, and eventually jeopardize the hospital financially. In this study, strategies for effective transfers to the lower levels of care, and to decrease the length of stay were presented by surveying and analyzing the patient's knowledge of the transfer needs, and the willingness to transfer those whose hospital length of stay was more than 30days. Method : The survey is subject to a group of 251 patients who have been hospitalized over 30 days in a general hospital in Seoul. Excluding those that were in the Intensive Care Unit and psychiatric ward, 214 in-patients were used as participants. They were surveyed from April 9, 2002 to April 17, 2002. One hundred and thirty seven out of 214 were responded which made the response rate 64%. Data were analyzed by SAS and SPSS. Result : Multi-variable Logistic Regression Analysis showed a significant effect in medical expenses, knowledge of referral system and the information of the receiving hospital. The financial burden in medical expenses made the patient 10.7 times more willing to be transferred, knowledge of the referral system made them 5 times more willing to be transferred, and the information of receiving hospital makes 6.5 times more willing to be transferred. Reasons for willing to be transferred to a lower level of care were the phase of physical therapy, the distance from home, the attending physician's advice and being unable to be treated as an out patient. Reasons for refusing to be transferred were the following. The attending physician's competency, not being ready to be discharged, not trusting the receiving hospital's competency due to the lack of information, or never hearing about the referring system by the attending physician. Conclusion : Based on this, strategies for the effective transfer to the lower levels of care were suggested. It is desirable for the attending physician to be actively involved by making an effort to explain the transfer need, and referring to the Healthcare Coordinating Center, which can help the patient make the right decision. Nationwide networking for the referral system is the another key factor that may need to be suggested as an alternative to decrease the medical expenses. Collaborating with the Home Health Agency for the early discharge planning and the Social Service Department for financial aid are also needed. It is recommended that the hospital should expedite the transfer process by prioritizing the cost and the information as medical expenses, knowledge of referring system and the information of the receiving hospital, are the most important factors to the willingness to transfer to a lower level of care.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.427-434
• /
• 2017

This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting distance and sowing date. The object of this experiment is to get basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another object was to evaluate optimum planting distance and sowing date in central district area. Total number of tillers was more in 80 cm ridge than 60 cm ridge and it was increased as the planting distance was wider from 15 cm to 30 cm on the each ridge. Ratio of effective tillers was higher in 60 cm ridge than 80 cm ridge and it was decreased as planting distance was wider from 15 cm to 30 cm. The lower the planting distance, the more increased total number of tillers, whereas effective tillers was decreased as planting distance was high. Average of total number of tillers of three varieties was higher in sowing date of May 2 (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of May 23 (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting distance and days to heading and ripening date from seeding. Culm length increased as planting distance was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting distance among 6 planting distances.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.141-150
• /
• 2007

This paper proposes new Steganographic model for VoIP that has very effective method using low bit encoding. Most of Steganographic models using Low bit Encoding have two disadvantages; one is that the existence of hidden secret message can be easily detected by auditory, the other is that the capacity of stego data is low. To solve these problems, this method embed more than one bit in inaudible range, so this method can improve the capacity of the hidden message in cover data. The embedding bit position is determined by using a pseudo random number generator which has seed with remaining message length, so it is hard to detect the stego data produced by the proposed method. This proposed model is able to use not only to communicate wave file with hidden message in VoIP environment but also to hide vary information which is user basic information, authentication system, etc.

• The Korean Fashion and Textile Research Journal
• /
• v.21 no.2
• /
• pp.220-230
• /
• 2019

The Fourth Industrial Revolution has increased studies on observing the cross section by overlapping the clothing worn using 3D human body data. However, there is a lack of studies on the effect of pressure clothing that contracts the shape of the human body. Therefore, this study objectively evaluated the shaping functionality of body shapers using 3D scan and 3D data. Two types of commercial body shapers were selected for this study. The nude body and body wearing body shapers were then scanned. A 3D program evaluated the shaping functionality by overlapping the nude state with the body wearing body shaper A and B respectively. As a result, it was found that the effect of body shapers could be adequately observed according to body parts. The smaller body shaper was shown to have superior shaping capability with the abdomen more affected. Analysis of the horizontal cross section indicated that the waist circumference decreased by 6 cm when wearing body shaper A and decreased by 12cm when wearing body shaper B. The volume of the waist part decreased by 8.6% when wearing body shaper A and by 20.4% when wearing body shaper B. Therefore, it is more effective to compare the objective shaping functionality by body parts using the overlapped 3D scanned data rather than using exterior evaluation or length measurement when wearing clothing that contracts the body shape.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.261-277
• /
• 2017

This study defines influencing sections as the part of the road section where passing vehicles are traveling with the lower speed compared to speed limit due to speed humps. The influencing section was divided into 3 parts; influencing section before the speed hump, interval section, and influencing section after the speed hump. This analysis focused on the changes of each part depending on installation types, vehicle types, and daytime or nighttime. For the interval section, especially, the ratio of distance traveled with lower speed than speed limit to interval section is defined as effective influencing section ratio to be analyzed. Vehicle speed profiles were collected with a speed gun to extract influencing section lengths. The survival analysis was applied and estimated survival functions are compared with each other by several statistical tests. As a consequence, the average length of influencing section on the 50m sequential speed humps was 75.3% longer during the deceleration than that of isolated speed hump, and 18.9% during the acceleration. The effective influencing section ratio for the 30m and 50m sequential speed humps had a small difference of 81.0% and 76.0% while the absolute values of the section that passing speed were less than the speed limit were longer on 50m sequential speed humps, each being 24.3m and 38.0m. Using the log rank test, it was evident that sequential speed humps were more effective to increase the length of influencing sections compared to the isolated speed hump. Vehicle type was the strong factor for influencing section length on the isolated speed hump, but daytime or nighttime was not the effective one. This research result can be used for improving the efficiency selecting the installation point of speed humps for road safety and estimating the standard of the distance between sequential speed humps.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.350-366
• /
• 2016

Objectives: No 3D anthropometric analyses have been conducted for Korean children's faces for the purpose of designing respiratory protective devices. The aim of this study was to develop masks against yellow dust and fine particulates, particularly for children in Korea. Methods: This study utilized a 3D scanning method to obtain 16 facial anthropometric data from children, ages of 5 to 13 years old. A total of 144 boys and girls were recruited from the kindergarten, elementary schools and middle schools in Seoul. With facial dimensions obtained, cluster analysis was performed to categorize them into similar facial groups. For each cluster, an optimal mask was designed and manufactured using a 3D printer. In addition, lung function data were obtained from 62 subjects and compared with those of normal adults. The pulmonary physiological results were subsequently used to suggest a test method for mask certification. Results: Facial shapes were classified into tree clusters: small, medium, and large. The face width and length for the first group were small with high nosal protrusion. The face width and length for the second group were the largest among the three clusters. The third group had the largest angle of nose root - gnathion(n-prn-gn). Age was the most significant variable in the facial dimensions. Children's pulmonary physiological capacity was about 60% of adults' capacity. The results of fit test using the prototype masks developed showed very good fits for children. Conclusions: For Korean children, three mask sizes will be sufficient and practical for providing protection against yellow dust and fine particulates. Anthropometric data obtained using digitalized 3D face analysis can be very effective for designing respiratory devices. 3D images can be accurate and easily measured for multiple dimensions, particularly for curved areas of the face. It is imperative to adopt different test methods for certifying respiratory protective devices for children, since their pulmonary physiological capacity is inferior compared with that of adults.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.2
• /
• pp.282-297
• /
• 1996

The effective construction for ready-made clothes is one of the central concerns of both consumers and manufactuers in today's apparel industry. In order to reduce the burden of stocks and increase clothing fitness, systematic information on typical body sizes and somatotypes is essential. The purpose of this study i-: to provide basic data on young women's somatotypes for form designers and pattern makers. The subjects of the survey were 310 women of 18 to 26 years old. The study collected 84 anthropometric data for each Person. The data was analyzed by using of the multivariate method. The factor analysis was utilized in regard to the 65 items obtained from anthropometric measurement respectively. The principal component analysis was applied to the data with orthogonal rotation after extraction. The factor scores used in the factor analysis became the basis of determining the value of each variable of the cluster analysis. The cluster analysis was applied for identifying typical somatotypes. Ward's minimum variance method was applied for the purpose of extracting distance metrix by the standardized Euclidean distance. The element forming each cluster can be subdivided into several sets by crosstabulation which is obtained by the fastclus of the SAS. This research has demonstrated 3 distinctive types of silhouette contour of the trunk. Incidentally it also identified 4 of the lower body from the waistline to thigh contour respectively. The discriminant analysis showed that the most significant discriminant factor of the trunk classification were side neck point -1 scapular -1 waistiline length and waist girth. In Korea, the average somatotype of female college students tends to be tall, slim and straight. Reviewing the relationship between the classifications of three parts of body, they are related to each other to some extent but their distribution are not constant. Therefore, in view of clothing construction, a proper separation of the body surface is a necessity.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.77-84
• /
• 2024

In this paper, we propose a method for accurately and rapidly detecting defects in wire harnesses by utilizing computer vision to calculate six crucial measurement values: the length of crimped terminals, the dimensions (width) of terminal ends, and the width of crimped sections (wire and core portions). We employ Harris corner detection to locate object positions from two types of data. Additionally, we generate reference points for extracting measurement values by utilizing features specific to each measurement area and exploiting the contrast in shading between the background and objects, thus reflecting the slope of each sample. Subsequently, we introduce a method using the Euclidean distance and correction coefficients to predict values, allowing for the prediction of measurements regardless of changes in the wire's position. We achieve high accuracy for each measurement type, 99.1%, 98.7%, 92.6%, 92.5%, 99.9%, and 99.7%, achieving outstanding overall average accuracy of 97% across all measurements. This inspection method not only addresses the limitations of conventional visual inspections but also yields excellent results with a small amount of data. Moreover, relying solely on image processing, it is expected to be more cost-effective and applicable with less data compared to deep learning methods.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.657-666
• /
• 2009

In GIS area, many line simplification algorithms are studied among generalization methods used for making the building data in the form of digital map from the original line data. On the other hand, there are few studies on the simplification algorithm considering the drawing rules of the digital map in Korea. In this paper, the line simplification algorithm based on the drawing rules is proposed as the methodology to create or update the building data of digital map by extracting the building outline from the CAD data used in construction. To confirm the usefulness of the algorithm, this algorithm and four other effective and general line simplification algorithms (e.g., Douglas-Peucker algorithm) are applied to the same building outlines. Then, the five algorithms are compared on five criteria, the satisfaction degree of the drawing rules, shape similarity, the change rate of the number of points, total length of lines, and the area of polygon. As a result, the proposed algorithm shows the 100% of satisfaction degree to the drawing rules. Also, there is little loss in four other mentioned criteria. Thus, the proposed algorithm in this paper is judged to be effective in updating the building data in digital map with construction drawings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.817-821
• /
• 2012

In this paper we applied the optimal mixture number estimation technique in GMM(Gaussian mixture model) using BIC(Bayesian information criterion) and MDL(minimum description length) as a model selection criterion for environmental sounds recognition. In the experiment, we extracted 12 MFCC(mel-frequency cepstral coefficients) features from 9 kinds of environmental sounds which amounts to 27747 data and classified them with GMM. As mentioned above, BIC and MDL is applied to estimate the optimal number of mixtures in each environmental sounds class. According to the experimental results, while the recognition performances are maintained, the computational complexity decreases by 17.8% with BIC and 31.7% with MDL. It shows that the computational complexity reduction by BIC and MDL is effective for environmental sounds recognition using GMM.