• The Korean Journal of Emergency Medical Services
• /
• v.25 no.2
• /
• pp.145-156
• /
• 2021

Purpose: Despite the fact that emergency medical centers (ED) are used by emergency patients, more than 50% of non-emergency patients have been reported to be admitted in EDs, of which more than 10% of them used the 119 ambulance. Therefore, this study investigated whether there was a change in the severity of patients visiting EDs during the first year of the COVID-19 pandemic. Methods: This was a retrospective study of patients who visited the ED through the 119 ambulance in 2019 (13,735) and 2020 (11,015). Patient data were analyzed using the medical information system. Results: There was an increase in non-emergency patients at the emergency departments (KTAS levels 4-5) in 2020 with a rate of 58.0% (6,393), as compared to the 2019 data with a rate of 44.9% (6,169). However, the 2020 median length of stay in the emergency department was 188 minutes (IQR: 0-5,909minutes) (p=.000), which was decreased as compared to the 2019 median length of stay of 231 minutes (IQR: 5-6,211minutes) (p=.003). Conclusion: Providing emergency ambulance guidelines for selecting proper hospitals and educating patients to refrain from using the ED for non-emergency patients should be taken into consideration to prevent overcrowding and construct a more effective emergency medical system (EMS).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.4
• /
• pp.399-406
• /
• 2023

This study presents an analysis of bycatch data concerning Pacific white-sided dolphins (Lagenorhynchus obliquidens) along the Korean coast from 2016 to 2021. A total of 503 bycatches were examined, encompassing data on year, month, body length, sex, latitude (N), longitude (E), and fishing gear. Bycatch was the most frequent in waters with a longitude of less than 130°E, particularly in the southern coastal region at a latitude of 35.5°N, with a higher likelihood of bycatch in lower latitudes. Since 2017, a decreasing trend in bycatches has been observed. The sex distribution of bycaught dolphins showed a predominance of males (40%), followed by females (31%), with an unclassified category at 29%, though no statistically significant differences were found (p > 0.05). Seasonal analysis indicated that bycatch predominantly occurred during the winter months, with significant monthly variations (p < 0.01). Pacific white-sided dolphins were primarily ensnared in gill nets and, to a lesser extent, in stationary nets. Statistical analysis by gear type revealed a significant preference for gill nets (p < 0.001). Considering body length composition in relation to latitude, it is suggested that Pacific white-sided dolphins may utilize the southern waters of the East Sea as a potential nursery ground, though this was not confirmed at a significant level, emphasizing the need for further in-depth monitoring and ecological investigations. Given that there are approximately 27 different types of gill nets associated with the majority of bycatches, more detailed research is warranted to divide these gear types into finer subcategories for estimating bycatch relationships, ultimately leading to the development of effective conservation and management strategies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.5
• /
• pp.911-918
• /
• 2024

This study developed and evaluated the performance of a machine learning-based model for predicting cucumber fruit set using cucumber growth data. In this study, plant height, node number, internode length, stem thickness, leaf length, leaf width, leaf count, and female flower count were used as independent variables, and the fruit set was set as the dependent variable to develop a prediction model. Various machine learning algorithms, including Linear Regression, Random Forest, XGBoost, Support Vector Regression (SVR), and K-Nearest Neighbors (KNN), were applied, and model performance was evaluated based on Mean Squared Error (MSE) and the coefficient of determination (R²). As a result, the Random Forest algorithm demonstrated the best performance, with an MSE of 3.91 and an R² of 0.828, effectively capturing the non-linear relationships in the cucumber growth data. In particular, the Random Forest model showed robustness against outliers and proved to be highly effective in predicting fruit set.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.293-302
• /
• 2004

The transfer of prestress force in pretensioned prestressed concrete (PSC) members is of great concern because it affects directly the distribution of stress around the transfer zone. The design provision of current design code on the transfer length considers only the prestress intensity and the diameter of prestressing steels. However, other factors such as concrete compressive strength and concrete cover may affect greatly the transfer length. The purpose of the present paper is to explore the various factors that affect the transfer length in pretensioned PSC members. The bond stress-slip relation between prestressing steel and concrete was modeled first from experimental data and then this model was incorporated into the interface element. The interface element was used to perform the finite element analysis for pretensioned PSC members. The results indicate that the compressive strength and concrete cover are also very important parameters which affect the transfer length greatly. This means that the current design code, which considers only the effective prestress and diameter of prestressing steel, must be improved to take into account the other important variables of compressive strength and concrete cover. The present study allows more realistic analysis and design of pretensioned PSC members.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.335-342
• /
• 2015

Objective : The purposes of this study was to analyze the effects of the stirrup length fitted to the rider's lower limb length and it's impact on less skilled riders during trot in equestrian events. Methods : Participants selected as subjects consisted of less skilled riders(n=5, mean age: $40.02{\pm}10.75yrs$, mean heights: $169.77{\pm}2.08cm$, mean body weights: $67.65{\pm}7.76kg$, lower limb lengths: $97.26{\pm}2.35cm$, mean horse heights: $164.00{\pm}5.74cm$ with 2 type of stirrups lengths(lower limb ratio 74.04%, and 79.18%) during trot. The variables analyzed consisted of the displacement for Y axis and Z axis(head, and center of mass[COM]) with asymmetric index, trunk front-rear angle(consistency index), lower limb joint(Right hip, knee, and ankle), and average vertical forces of horse rider during 1 stride in trot. The 4 camcorder(HDR-HC7/HDV 1080i, Spony Corp, Japan) was used to capture horse riding motion at a rate of 60 frames/sec. Raw data was collected from Kwon3D XP motion analysis package ver 4.0 program(Visol, Korea) during trot. Results : The movements and asymmetric index didn't show significant difference at head and COM, Also, 74.04% stirrups lengths in trunk tilting angle showed significant difference with higher consistency than that of 79.18% stirrups lengths. Hip and knee joint angle showed significant difference with more extended posture than that of 74.04% stirrups lengths during trot. Ankle angle of 79.18% stirrups length showed more plantarflexion than that of 74.04% stirrups lengths. Average vertical force of rider showed significant difference with higher force at 79.18% stirrups lengths than that of 74.04% stirrups lengths during stance phase. Conclusion : When considering the above, 74.04% stirrups length could be effective in impulse reduction with consistent posture in rather less skilled horse riders.

• Women's Health Nursing
• /
• v.8 no.4
• /
• pp.559-569
• /
• 2002

The study examined the effects of San-Yin-Jiao(SP-6) acupressure treatment on labor pain, length of delivery and anxiety for women in the labor. The effects of using SP-6 acupressure were evaluated by comparing two groups, a SP-6 acupressure group (22) and a control group (17), for a total of 39 women in labor who had a normal vaginal delivery. Data were collected using a structured questionnaire which included general characteristics, a subjective labor pain scale, measurement of duration of delivery time and a subjective anxiety scale. Data were collected before treatment (pre) and after treatment (post). The results of this study are summarized as follows : 1. The post-scores for total labor pain increased over the pre-scores but the difference between the two groups was not statistically significant(p=0.219). Wilcoxon signed rank test of the difference in pre-post labor pain scores for the SP-6 acupressure group was not statistically significant (p=0.081) but the increase for the control group was statistically significant (p=0.001). 2. The length of time for the delivery in the group which had the SP-6 acupressure was shorter (143.91${\pm}$67.77) than the control group (197.94${\pm}$89.64). The difference between the two groups was statistically significant (p=0.028). 3. The post-scores for anxiety increased over the pre-scores but the difference between the two groups was not statistically significant (p=0.426). The scores of SP-6 acupressure group did not show a significant increase by the Wilcoxon signed rank test (p=0.194) but in the control group showed a significant increase (p=0.008).This study showed that SP-6 acupressure was effective in relation to labor pain, length of time for delivery and anxiety for labor women. But it is necessary to replicate the study with a larger number of participants to generalize the results.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.1
• /
• pp.34-48
• /
• 2014

Marine algal assemblages on the artificial reefs at three stations (Haengwon, Geumneung, Pyoseon in Jeju-do) and the growth pattern of Ecklonia cava with water depth were studied before and after rocky cleaning. Nine algal species occurred at three artificial reefs before rocky cleaning in July 2012, however, 19 algal species were found at three artificial reefs after rocky cleaning in July 2013. In particular, 13 of 19 species in 2013 were replaced by different species which were not found in July 2012. Algal biomass rapidly increased in July 2013 after rocky cleaning. The nMDS plot based on the presence and absence data of macro-algal assemblages on the artificial reefs showed that the species compositions between artificial reefs were similar to each other before rocky cleaning operations in July of 2012. However, after rocky cleaning, the species composition of macro-algal assemblages in Haengwon region was similar to that in Pyoseon region while that in Geumneung region was different to those in Haengwon and Pyseon regions in July 2013. It is needed to clarify the suitable water depth for transplantation of perennial Phaeophyta E. cava. According to the data on seasonal changes in total length, total weight, blade length, blade width, blade weight of E. cava, it began to grow rapidly from April and reached to the maximum value in June, and then degeneration of the blade occurred in July and continued to early August. Although the total length of E. cava at 10m water depth was larger than those at 5 m and 15 m water depths, there was no significant difference statistically among water depths by ANOVA test. However, in the values of total weight, blade length, blade width, and blade weight, the growth patterns at 5 m water depth were larger than those at 10 m and 15 m. Thus, it is assumed that the most suitable water depth for transplantation and its maximum growth and effective release of zoospores of E. cava will be 7~10 m water depth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.96-103
• /
• 2018

An analysis using a statistical method is generally used to determine the effective temperature based on the temperature design load of a bridge. In this study, the effective temperature was calculated by building an artificial neural network (ANN) capable of improving the statistical method. A Steel box girder bridge specimen was made with a width of 2.0 m, height of 2.0 m, and length of 3.0 m and 0.2 m the upper slab. Twenty one temperature gauges were attached to measure the temperature between 2014 and 2016 for three years. An ANN was learned using the data measured from 2014~2015 and the results were compared with the Euro codes. The error rate between the Euro code and statistical analysis values was analyzed to be 4.1 % for the total measurement point. The ANN was verified and the effective bridge temperatures were calculated using the temperature data measured in 2016. The results revealed an approximate 3.97 % difference from the statistical analysis values. This degree of error is considered to be acceptable in terms of engineering for the analysis of an ANN. An ANN can easily predict the effective temperature of a bridge by knowing the input values of the region's highest temperature, bridge type, and upper asphalt thickness when designing the bridge's temperature loads.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1904-1913
• /
• 2021

With the proliferation of smart phones and the development of IoT technology, it has become possible to collect personal data for public purposes. However, users are afraid of voluntarily providing their private data due to privacy issues. To remedy this problem, mainly three techniques have been studied: data disturbance, traditional encryption, and homomorphic encryption. In this work, we perform simulations to compare them in terms of accuracy, message length, and computation delay. Experiment results show that the data disturbance method is fast and inaccurate while the traditional encryption method is accurate and slow. Similar to traditional encryption algorithms, the homomorphic encryption algorithm is relatively effective in privacy preserving because it allows computing encrypted data without decryption, but it requires high computation costs as well. However, its main cost, arithmetic operations, can be processed in parallel. Also, data analysis using the homomorphic encryption needs to do decryption only once at any number of data.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.546-550
• /
• 2007

High excess pore water pressure may develop when loose saturated sand is subjected to earthquake excitation, resulting in reduction in the shear strength and stiffness, and ultimately can result in liquefaction. It is very important to accurately assess the level of the pore pressure generation for seismic design and to perform effective stress analysis. A simple numerical 모형 is developed for estimating the development of pore water pressure due to seismic loading. The method only uses two parameters and the length of the accumulated shear strain. The accuracy of the proposed 모형 is verified through a series of laboratory test data. Comparisons show that the modified 모형 is an improvement over existing 모형s.