• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.87-97
• /
• 2000

A steady state performance simulation and diagnostics program for the turboprop engine (PT6A-62), which is the power plant of the first developed military basic trainer KT-1 in Republic of Korea, was developed. The developed steady state performance analysis program was evaluated with the performance data provided by the engine manufacturer and with analysis results of GASTURB program, which is well known for the performance simulation of gas turbines. Performance parameters were discussed to evaluate validity of the developed program at various cases such as altitude, flight velocity and part load variation. GPA(Gas Pass Analysis) allows engine performance deterioration to be identified at the module level in terms of reduction in component efficiencies and changes in mass flow. In order to find optimal instrument set to detect the physical faults such as fouling, erosion and corrosion, a gas path analysis approach is utilized. This study was performed in two cases for selection of optimal measurement parameters. One case was considered with the effect of instrument number by changing independent parameter number. The other case was performed with selection of independent parameter set. According to the analysis results, the optimal measurement parameters selected were eight dependent variables such as shaft horsepower, fuel flow rate, compressor exit pressure and temperature, compressor turbine inlet pressure and temperature and power turbine inlet pressure and temperature.

• Journal of the Korean Dietetic Association
• /
• v.10 no.2
• /
• pp.205-217
• /
• 2004

This study was carried out to provide information on the effect of nutrition education program for diabetic patients at the Guri City's Public Health Center. Subjects of this study were 31 persons(male 7, female 24) who attended all courses of "2002 Diabetes Education Class". They were indicated as the 'education group'(EG). Eating and living habits of EG were investigated before the education. EG's weight and blood glucose (post prandial 2 hours, PP2) were examined as well. EG's PP2 reduction was compared with a 'control group'(CG) who didn't join any course in that class. All of the subjects were non-insulin-dependent diabetes mellitus(NIDDM) patients. EG's average age was 62.4$\pm$8.8. Before taking the course, EG's PP2 was 251.5$\pm$29.6mg/dl, and body mass index(BMI) was 26.3$\pm$2.3 on average. Most of them were stressed out from their daily lives and usually had no exercise. Most people of EG ate meals rapidly and liked sweet and fatty foods. After the course of training, EG's weight and BMI before the training were not decreased significantly. However, all of the EG's PP2s, which were measured 4 times(before the meal at the special lunch session, after 2 hours at this meal, after 2 weeks and 4 weeks dietary assembly), were decreased in comparison with the PP2 which was checked prior to joining the training. EG's average PP2 was more reduced than CG's one. In addition, all groups' PP2s were decreased for 8 weeks. After all, this nutritional education at the public health center was effective in glycemic control for diabetes mellitus patients. Especially, when the dietary assembly as practical training was included in the educational process, the patient's dietary intake and PP2 was improved more effectively. Therefore, this study suggests that nutrition work at public health centers is necessary for the Health Promotion Policy.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.180-190
• /
• 2009

Depth of prostate volume from the skin can vary due to intra-fractional and inter-fractional movements, which may result in dose reduction to the target volume. Therefore we evaluated the feasibility of automated depth determination-based adaptive proton therapy to minimize the effect of inter-fractional movements of the prostate. Based on the center of mass method, using three fiducial gold markers in the prostate target volume, we determined the differences between the planning and treatment stages in prostate target location. Thirty-eight images from 10 patients were used to assess the automated depth determination method, which was also compared with manually determined depth values. The mean differences in prostate target location for the left to right (LR) and superior to inferior (SI) directions were 0.9 mm and 2.3 mm, respectively, while the maximum discrepancies in location in individual patients were 3.3 mm and 7.2 mm, respectively. In the bilateral beam configuration, the difference in the LR direction represents the target depth changes from 0.7 mm to 3.3 mm in this study. We found that 42.1%, 26.3% and 2.6% of thirty-eight inspections showed greater than 1 mm, 2 mm and 3 mm depth differences, respectively, between the planning and treatment stages. Adaptive planning based on automated depth determination may be a solution for inter-fractional movements of the prostate in proton therapy since small depth changes of the target can significantly reduce target dose during proton treatment of prostate cancer patients.

• Korean journal of applied entomology
• /
• v.52 no.3
• /
• pp.227-237
• /
• 2013

The black soldier fly (BSF), Hermetia illucens, is a generalist detritivore that is usually exploited for recycling environmental wastes, including food remnants. These insects can also be used to produce antibiotics for medical applications. For this purpose, flies need to be mass-reared using an automatic rearing system that generates various sounds. Insects use sound as a means of communication for mating or warning against predators. Thus, extrinsic sounds may interrupt the normal physiological processes of insects. In this study, we analyzed the physiological changes due to various sound treatments at $25^{\circ}C$ and 8:16 h (L:D) photoperiod. At 95 dB, larvae were exposed to different sound frequencies (0-5,000 Hz). The treated larvae were adversely affected by the high-frequency sounds and showed significant reduction in pupation and adult emergence. Different sound intensities (0-105 dB) at 5,000 Hz caused significant changes in the pupation and survival of the adults at 85 dB or above. Under a stress sound condition (5,000 Hz, 95 dB), the BSF larvae exhibited aberrations in the expression of genes related to the immune system and digestion. These results indicate that high-frequency sound treatments at or above 85 dB act as a stress sound to BSF development.

• Journal of Food Hygiene and Safety
• /
• v.37 no.4
• /
• pp.207-215
• /
• 2022

The intensity of fishy odor in eggs, which differs depending on the poultry type and individual perception, can be due to many factors including trimethylamine (TMA) which has been identified as the main. Notably, riboflavin can increase the activity of flavin-containing monooxygenase 3, the enzyme responsible for converting TMA into odorless trimethylamine-N-oxide. This study aimed to analyze the TMA content in egg yolk, evaluate its contribution to fishy odor, and develop a method to prevent this undesired odor. Solid-phase microextraction-gas chromatography/mass spectrometry was used to detect and quantify volatile compounds in egg yolk from hens fed a standard TMA-rich diet and hens fed a riboflavin-supplemented diet. To compare the relative content of volatile substances between eggs, a correlation study was performed using an electronic nose. Higher concentration of TMA (1.06 ± 0.12 mg/kg) was detected in egg yolks obtained from hens fed a normal diet than those fed a riboflavin-supplemented diet. Overall, this study suggests that riboflavin affects the quantity and quality of volatile substances, including TMA, present in eggs and we expect these findings to improve the quality and reduce the fishy odor of eggs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3973-3981
• /
• 2015

This study was aimed to investigate the effect of dietary ${\beta}$-glucan obtained from bacterial fermentation on the adiposity and serum lipids level in rats. Sprague-Dawley rats fed high fat diet for 6 weeks to induce obesity, and subsequently fed with 0% (high fat control group), 0.1% or 0.5% ${\beta}$-glucan supplemented high-fat diets (w/w) for another 5 weeks. For comparison, normal control groups fed AIN-76A diet. Supplemented with 0.1% ${\beta}$-glucan resulted in a significant reduction of high-fat induced peritoneal fat and visceral fat development by 16%, 19%, and 28%, respectively(P<0.05). Serum free fatty acid levels were reduced(by 19%), whereas the HDL cholesterol level was increased(by 50%) by 0.1% dietary ${\beta}$-glucan(P<0.05). In conclusion, dietary ${\beta}$-glucan reduced adiposity and improved serum lipids in obese rats fed high fat diet. The present study suggest that ${\beta}$-glucan supplementation to the diet is beneficial in suppressing diet-induced obesity and dyslipidemia.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of Life Science
• /
• v.29 no.12
• /
• pp.1337-1344
• /
• 2019

Osteoporosis is characterized by a reduction in bone mass and typically manifests as an increase in fractures. Because this disease is common in elderly populations and lifespans are rapidly increasing, the incidence of osteoporosis has also grown. Most drugs currently used for osteoporosis treatment target osteoclasts in the bone tissue to prevent absorption. However, these medications also cause certain side effects and, furthermore, cannot increase bone mass. Thus, in order to control osteoporosis, regenerative medicine that utilizes adult stem cells and osteoblasts has been extensively studied. Statins, also known as 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase inhibitors, are cholesterol-lowering drugs that have been widely prescribed for cardiovascular diseases. Interestingly, recent studies have reported the beneficial effects of various statins on bone formation via the activation of osteoblasts. Thus, the current study investigated the effects of seven statin-family drugs on osteoblast activity during osteogenic differentiation using adult stem cells from human periosteal tissue. Specifically, statin effects on alkaline phosphatase activity, an early marker of bone cell differentiation, and on calcium deposit, a late marker of bone cell differentiation, were assessed. The results demonstrate that some statins (for example, pitavastatin and pravastatin) have a weak but positive effect on bone formation, and the findings therefore suggest that statin treatments can be a novel modulator for osteogenic differentiation and regenerative medicine using periosteal stem cells.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.3
• /
• pp.64-75
• /
• 2014

The purpose of this study is to analyze the effects of satisfaction in neighborhood park environments located in the Changwon-si of Gyeongsangnam-do, South Korea, on physical activity, the number of parks used for health improvement, and health levels based on Body Mass Index(BMI). Accordingly, a survey was conducted of 429 nearby residents and users of eight neighborhood parks located in urban areas of Seongsan-gu and Uichang-gu in the Changwon-si. The correlation between the environmental perception of neighborhood parks and physical activity and health, which was observed in the survey results, was analyzed using one-by-one linear regression analysis. By summarizing the study results, it was found that the primary reasons for avoiding park use were lack of time, time and effort required to reach the park(i.e., distance from the park), and lack of facilities within the park. Conversely, the primary reasons for using the park included accessibility, walking or strolling, leisure facilities, trees or shade, and diversity in exercise areas. In the case of park users, walking or strolling was the most common activity in the park. On average, park users walked to the parks for 10 minutes and exercised for an hour at least twice per week. With respect to the physical environment of the parks and surrounding areas, park users showed a high level of satisfaction with the distance between their houses and parks and the street environment. On the contrary, they exhibited low levels of satisfaction with water spaces and sightseeing within the parks. Subsequently, it was shown that the number of people using the parks for physical activities and health improvement was positively influenced(within a 5% significance level) by the intent to use the park for exercise, time spent in the park, satisfaction with park use and health improvement, distance to the park, and the convenience of using the park for the elderly. However, only the health improvement gained from park use was found to exhibit a correlation with BMI at the 10% significance level. Continuous accumulation of practical case studies on physical activities in parks and their health improvement effects is required. Through this, park spaces that are under the threat of reduction or elimination owing to various development plans can be conserved and expanded. Furthermore, such case studies can be used to provide data as the basis for deriving park plans and designs that improve parks' functions as sites of physical activity and health improvement.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.4 s.54
• /
• pp.289-293
• /
• 2005

Nowadays there are many sun protection cosmetics including organic or inorganic UV filter as an active ingredient. Chemically stable inorganic sunsEreen agents, usually metal oxides, we widely employed in high SPF products. Titanium dioxide is one of the most frequently used inorganic UV filters. It has been used as pigments for a long period of cosmetic history. With the development of micronization techniques, it becomes possible to incorporate titanium dioxide in sunscreen formulations without whitening effect and it becomes an important research topic. However, there are very few works related to quantitations of titanium dioxide in sunscreen products. In this research, we analyzed amounts of titanium dioxide in sunscreen cosmetics by adapting redof titration, reduction of Ti(IV) to Ti(III) and reoxidation to Ti(IV). After calcification of other organic ingredients of cosmetics, titanium dioxide is dissolved by hot sulfuric acid. The dissolved Ti(IV) is reduced to the Ti(III) by adding aluminum metals. The reduced Ti(III) is titrated against a standard oxidizing agent, Fe(III) (ammonium iron(III) sulfate), with potassium thiocyanate as an indicator In order to test accuracy and applicability of the proposed method, we analyzed the amounts of titanium dioxide in four types of sunscreen cosmetics, such as cream, make-up base, foundation and powder, after adding known amounts of titanium dioxide $(1{\sim}25w/w%)$. The percent recoveries of the titanium dioxide in four types of formulations were in the range between 96 and 105%. We also analyzed 7 commercial cosmetic products labeled titanium dioxide as an ingredient and compared the results with those of obtained from ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry), one of the most powerful atomic analysis techniques. The results showed that the titrated amounts were well coincided with the analyzed amounts of titanium dioxide by ICP-AES. Although instrumental analytical methods, ICP-MS (Inductively Coupled Plasma-Mass Spectrometry) and ICP-AES, are the best for the analysis of titanium, it is hard to adopt because of their high prices for small cosmetic companies. It was found that the volumetric method presented here gat e quantitative and reliable results with routine lab-wares and chemicals.