• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.90-97
• /
• 1992

An estimation method for the amplitude and phase response of transmission line is discussed. and applied to narrow band ISDN subscriber line. The ABCD parameters of line are evaluated from four impedance values: the standard termination impedence at activated and deactivated stares, and the input impedances of line which can be estimated at each state. Estimating input impedence, the “chirp” signal is used as incident signal and noise effect can be reduced by ensemble averaging. These ABCD parameter estimations might be applicable to ether uniform or nonuniform line. Cleary the magnitude and phase response can be obtained from estimated ABCD parameters. The numerical simulation results for N ISDN subscriber line model are included, and the estimation error introduced by deviation in load impedence is also anlyzed.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.147-156
• /
• 2006

Metropolitan Subway, tke volume of station, distance between station is short. when the demand is concentrated during moving peak periods, the Headway that than Line Headway in which Station Headway is applied to Station Capacity computation be. The factors to determine the Station Headway have a fixing Price of the machine and the Dwell time. Other factors aye decided already or fixing price but the Dwell time that change according to demand cause the biggest effect at Station Headway. After analyze constituents that influence to Station Headway in this study calculated correct Station Capacity drawing estimating dwell time model that change according to demand.

• Korean Educational Research Journal
• /
• v.39 no.1
• /
• pp.15-38
• /
• 2018

This study aimed to confirm that the lateral lines of fish indicate water temperature, water pressure, water flow, and sound waves by conducting a direct experiment. To confirm the superiority of fish lateral lines to detect material stimuli after the experimental study of the fish lateral line's sensation function, the lateral line's tissue was expanded and the shape of the lateral side of the fish was created using a 3-D printer to realize the lateral stripe parity. The amplification effect was confirmed by measuring the sound waves, which was the material stimulus of the lateral diagonal parabola. This proved that fish lateral lines are biotechnologically superior sensory organs.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.9
• /
• pp.46-55
• /
• 1992

This paper propose how to calculate the capacitance for VLSI interconnection lines in multi-dielectric layer. The proposed method is a expansive form of 3-dimensional direct intergral method developed in single-dielectric layer. We took into consideration the effect of multi-dielectric layer by using additional boundary condition instead of modified Green's function. It is used the potential equations in line surface and the electric field equations in dielectric interface as the boundary condition. RC delay time for interconnection line of multi-dielectric layer is obtained from the calculated capacitance value. At this time, we are used Al and WSiS12T as interconnection materials.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.579-586
• /
• 2019

This work examined effects of the synthesis method and melamine content of melamine-urea-formaldehyde (MUF) resins on the bond-line features (i.e. resin penetration and bond-line thickness) in plywood. Two synthesis methods (MUF-A and MUF-B) and three melamine contents (5, 10, and 20%) were employed to prepare MUF resins. The MUF-A resins at three melamine contents were prepared by a simultaneous reaction of melamine, urea, and formaldehyde, while the MFU-B resins were prepared by reacting melamine at the same levels with formaldehyde followed by urea. The results showed that higher melamine content increased the viscosity of MUF-A and MUF-B resins. The resin penetration of MUF-A resins decreased by 48% while those of MUF-B resins increased by 16% at 20% melamine content. As a result, the MUF-A resins had greater bond-line thickness than those of MUF-B resins as the melamine content increased. The MUF-B resins resulted in thinner bond-line and greater resin penetration compared to those of MUF-A resins. The results suggested that MUF-B resins prepared with 20% melamine content had a proper combination of resin penetration and bond-line thickness that could produce plywood panel with a better adhesion performance.

• Geosystem Engineering
• /
• v.21 no.5
• /
• pp.251-261
• /
• 2018

With the urbanization in recent years, the power line interference noise in electromagnetic signal is increasing day by day, and has gradually become an unavoidable component of noises in magnetotelluric signal detection. Therefore, a kind of power line interference noise elimination method based on independent component analysis in wavelet domain for magnetotelluric signal is put forward in this paper. The method first uses wavelet decomposition to change single-channel signal into multi-channel signal, and then takes advantage of blind source separation principle of independent component analysis to eliminate power line interference noise. There is no need to choose the layer number of wavelet decomposition and the wavelet base of wavelet decomposition according to the observed signal. On the treatment effect, it is better than the previous power line interference removal method based on independent component analysis. Through the de-noising processing to actual magnetotelluric measuring data, it is shown that this method makes both the apparent resistivity curve near 50 Hz and the phase curve near 50 Hz become smoother and steadier than before processing, i.e., it effectively eliminates the power line interference noise.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.3-14
• /
• 1994

This study is intended to identify the clothing mage as clothing form and dot space variation. This study consists of pre-experiment for setting the space between dot which shows the difference of the image and main experiment and also is made of factorial design for two variables-clothing form(H-line, A-line, V-line, X-line) dot (dot 1.0, dot 2.2, dot 3.4, dot 5.8) Qestionaire consists of 21 semantic differential scale expressing clothing form and .dot. Data is obtained from 50 female students maforing clothing and textile. The results of this study are as follows. 1) The image by the clothing form and the space dot variation is composed 5 factors' attention, activity, attraction, maturity, boldness. 2) The image by variation in clothing form dot has significant differences in attractive and attention factors, especially shows remarkable differences in attention. By choosing narrow space dot for attentive image, broden space dot for attractive image, you would be able to create the image you want. 3) The image by variation in dot clothing form has almost signific and differences in all factors, especially shows remarkable differences in activity. By choosing A-line for active image, V-line for mature and fashionable image, X-line for attractive, pretty and delicate mage, you would be able to create the image you want. 4) The interaction effect between clothing form and space dot was in attraction and maturity factor, V-line, X-line, dot 3.4 and dot 5.8 intensify attractive image, V-line and dot 1.0 mature image, X-line and dot 5.8 young image.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.22-26
• /
• 2013

The purpose of this study was to improve the design of a mooring line by attaching a lumped mass to it on the seabed. A numerical analysis of the redesigned mooring system is performed to analyze the effect of the weight of the attached lumped mass using the commercial software Orcaflex. The ultimate tension of the mooring system with the lumped mass is compared with that of a bare mooring line in the original design. An appropriately designed weight for the lumped mass is found to induce a critical lifted point in the mooring line by floater motion in the ultimate condition to move toward the floater position from the anchor point, while maintaining a similar safety factor for the mooring line. On the other hand, it is shown that excess weight for the lumped mass induces snapping in a mooring line, resulting in low safety factor for the mooring system. The distance between lumped weights is shown to be a minor parameter affecting the safety of a mooring line, although a shorter line has an advantage from an economic point of view. Using the optimal weight for the lumped mass attached to the mooring line on a seabed reduces the mooring line length and installation area occupied by a mooring system under real sea conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.132-139
• /
• 2004

Unsymmetrical faults are classified into single line-to-ground faults, line-to-line faults, or double line-to-ground faults in receiving and distribution power systems. Many of overhead distribution-line faults are single line-to-ground faults, and lightning surge arresters are stressed by system frequency overvoltages due to unsymmetrical faults. In this work, the unsymmetrical faults in receiving and distribution systems were experimentally simulated, and the characteristics of total leakage current flowing through lightning surge arresters due to various unsymmetrical faults were investigated. As a result, a little variations of the leakage current flowing through Zinc oxide (ZnO) surge arresters in the range of $\pm$10[%] voltage regulations were observed. It could be concluded that the unsymmetrical faults have no effect on the long-term life performance of ZnO surge arresters in effective grounding systems. On the other hand, the magnitude of the leakage current flowing through ZnO surge arrester elements under single line-to-ground faults was more than 140 times as compared with that under normal operating voltages in ineffective grounding systems. But abnormal voltages caused by line-to-line faults and double line-to-ground faults have a little effect on total leakage current of ZnO surge arrester elements.

• The Research Journal of the Costume Culture
• /
• v.9 no.6
• /
• pp.893-907
• /
• 2001

The main purpose is to study the effects of princess lines on different body types and to disguise any imperfection by using diverse princess lines. We separated testers body shapes into specific body types, H, Y by applying both the direct and the indirect measurements. These designs were evaluated by using the point ranking system method, and then average scores were obtained from these evaluations. Following are the results of the study: 1 These are the resulting illusion effects when the shoulder width of the Princess line was fixed. When the Princess line originated from 1/3 point of the armhole, body types Y appeared to show narrow waist width. A-line silhouette appeared to display the narrowest shoulder width. When the Princess line originated from 2/3 point of the armhole, body types H and Y appeared to exhibit narrowest waist widths, and the A-line silhouette once again displayed the narrowest shoulder width. When the Princess line originated from 1/2 point of the armhole, body type H appeared to exhibit narrow width; and H-line silhouette displayed the narrowest shoulder width 2. When the Princess lines waist w'4th was fixed in order to study illusion effects of waist widths. In this experiment, locations of Princess lines and widths of the skirt were varied. When the waist width was fixed at 6.5 cm, For the H body type, the Princess line location of 1/3 point of the armhole in H-line silhouette design exhibited the narrowest waist width. For the Y body type in A-line silhouette design, the Princess line locations of 1/3 and 1/2 points of the armhole exhibited the narrowest waist width because it displayed the hourglass effect. When the waist width was fixed at 10 cm, H body type did not exhibit any significant differences between designs. For Y body type, A-line silhouette design with the Princess line origination point at 1/3 down the armhole exhibited the narrowest waist width. 3. The illusion effects of the hip were studied by fixating the width of the skirt and varying the locations of Princess line and waist widths. In H-line skirt silhouette designs, all two body types exhibited narrow hips when the Princess line origination points were at 1/3 and 1/2 way down the armhole. For A-line skirt silhouette, H body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/2 point in the shoulder was shown. Y body type exhibited narrow hips when narrow waist design with the Princess line originating from 1/3 point of the armhole and 2/3 point of the shoulder. 4. With both waist and skirt widths fixed, all two body types exhibited taller and slender postures when the Princess line originated from the shoulder compare to the armhole.