• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.177-182
• /
• 2014

Purpose : The goal of this study was to compare and analysis the dose distribution and treatment time between Tomotherapy planning with fixed jaw(FJ) and dynamic jaw(DJ). Materials and Methods : Seven patients were selected in the study including five common clinical cases(brain, head and neck(HN), lung, prostate, spine). 1) Helical Tomotherapy plans with FJ and DJ were generated with the same planning parameters such as Modulation factor, Pitch and Field width. 2) Tomo_edge plans with a larger field width were generated to compare to conventional HT delivery with fixed jaw. Dosimetric evaluation indices for target coverage are Dmin, Conformity index(CI) and for whole body including target are $V_{10%}$, $V_{25%}$, $V_{50%}$, $V_{75%}$ using Dose-volume histogram(DVH). Also, Treatment time and Cumulative MU were used for clinical review on Tomo_edge. Results : In case of using the same field width of Tomotherapy planning with FJ and DJ, the averaged variations were $V_{10%}$: -11.91%, $V_{25%}$: -7.6%, $V_{50%}$ :-4.75%, $V_{75%}$: -1.04%. Tomo_edge with a larger field width provides the averaged variations for target coverage: Dmin: -0.72%, CI: -1.25% and also shows the tendency of a sharp $V_{x%}$ decline in low dose area. The clinical improvements in the larger field width with DJ were observed in the treatment time, ranging from -51.21% to -15.11, and the Cumulative MU decrease, ranging from -57.74% to -15.31%. Conclusion : Target coverage achieved by FJ and DJ with the same field width has little differences. But integral doses on whole body efficiently decreased. Compared to the conventional HT delivery, Tomo_edge with a larger field width presents a little worse target coverage. However, it provides faster treatment delivery and improved cranial-caudal target dose conformity. Therefore, Tomo_edge mode is efficient in improving the treatment time and integral dose while maintaining comparable plan quality in clinic.

• Korean journal of applied entomology
• /
• v.49 no.1
• /
• pp.31-36
• /
• 2010

Mating disruption (MD) using synthetic sex pheromone lures has been used to control the Oriental fruit moth, Grapholita molesta (Busck), in apple orchards. In Korea, where several small apple orchards are clustered but independently managed, its efficacy has been suspected mainly due to immigration of any mated females from nearby untreated cultivating areas. This study developed an edge treatment technique to decrease any local MD-free zones in a specific MD-treated farm and to trap any immigrating mated females by installing MD lures and food traps around the apple farm with 10 meter intervals. The addition of the edge treatment to the MD significantly prevented leaf and fruit damages induced by G. molesta compared to MD only. Moreover, this study tried to optimize the MD control technique by determining frequency of MD application. It suggests two MD applications with the edge treatment at the end of March and at the early of July to be effective throughout the entire apple growing seasons.

• Korean Journal of Plant Resources
• /
• v.26 no.4
• /
• pp.516-518
• /
• 2013

A new leaf variegated cultvar 'White Edge' was developed by ethyle methane sulfonate(EMS) treatment on seed of Hosta minor. Among induced leaf variegated plant, some with white color on the edge of the leaves was selected. They were cultivated via vegetative propagation. 'White Edge' was finally selected through the test of characteristics from 2003 to 2005. Assessment of botanical characteristics was conducted for three years. The major characteristic of these cultivar is that they maintain uniformly all year round. 'White Edge'(Grant No.1880) was registered to the Korea Seed and Variety Service(KSVS) for commercialization in 2007. These cultivar are useful as materials for pot or as ground cover plants.

• Journal of Chest Surgery
• /
• v.54 no.6
• /
• pp.449-453
• /
• 2021

The 2020 American College of Cardiology focused update on the mitral regurgitation (MR) pathway provides an excellent summary of the decision-making trees in the treatment of severe MR, in which 2 main branches of the flowchart are suggested depending on whether MR is primary or secondary. Surgery is suggested as preferable over transcatheter edge-to-edge repair (TEER) in primary MR that needs intervention. The decision-making for secondary MR generally prioritizes TEER over surgery according to the guidelines, but further stratification is necessary based on the pathophysiologic mechanisms of MR. TEER is probably the more suitable option in secondary MR caused by left ventricular dysfunction or dilatation, given the high perceived surgical risks, despite the lack of sufficient evidence in support of overt clinical benefits from surgical therapy in these patients. In atrial functional MR associated with atrial fibrillation (AF), however, concomitant ablation of AF seems to be a desirable option, as it has been demonstrated to be a key factor leading to improved survival, reduced stroke risk, and more durable mitral and tricuspid function in patients undergoing mitral surgery. Therefore, atrial functional MR requiring intervention may be best treated by surgical therapy that combines mitral repair and AF ablation in the majority of patients. This particular issue, however, needs further research to obtain scientific evidence to guide optimal management strategies.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.10 no.1
• /
• pp.8-15
• /
• 2001

The Class III malocclusion classified in two types of Skeletal Class III and Pseudo Class III. In the case of the maxillary deficiency, the protraction H-G(facemask) with Bonded RPE can be used. For children with A-P and vertical maxillary deficiency, the preferred treatment is to move the maxilla into a more anterior and inferior position, which also increases its size as bone is added at the posterior and superior sutures. Successful forward repositioning of the maxilla can be accomplished before age 8. To resist tooth movement as much as possible, the maxillary teeth should be splinted together as a single unit. The maxillary appliance must have hooks for attachment to the facemask that are located in the canine-primary molar area above the occlusal plane. The facemask usually worn until a positive overjet of 2-5mm is achieved interincisally. Occipital chin cup is successful in those patients who can bring their incisors close to an edge-to-edge position when in centric relation. This treatment is particularly useful in patients who begin treatment with a short lower anterior facial height, as this type of treatment can lead to an increase in lower anterior facial height. If the pull of the chin cup is directed below the condyle, the force of the appliance may lead to a downward and backward rotation of the mandible.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.871-875
• /
• 2001

Cobalt silicidation at sidewall spacer edge of Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) with post annealing treatment for capacitor forming process has been investigated as a function of dopant species. Cobalt silicidation of nMOSFET with n-type Lightly Doped Drain (LDD) and pMOSFET with p-type LDD produces a well-developed cobalt silicide with its lateral growth underneath the sidewall spacer. In case of pMOSFET with n-type LDD, however, a void is formed at the sidewall spacer edge with no lateral growth of cobalt silicide. The void formation seems to be due to a retarded silicidation process at the LDD region during the first Rapid Thermal Annealing (RTA) for the reaction of Co with Si, resulting in cobalt mono silicide at the LDD region. The subsequent second RTA converts the cobalt monosilicide into cobalt disilicide with the consumption of Si atoms from the Si substrate, producing the void at the sidewall spacer edge in the Si region. The void formed at the sidewall spacer edge serves as a resistance in the current-voltage characteristics of the pMOSFET device.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.4
• /
• pp.200-208
• /
• 2021

This paper investigated generation behavior of micro-arcs and growth behavior of PEO films on the AA7050 disc specimen in 0.1 M NaAlO₂ solution under the application of 1200 Hz anodic pulse current. Morphologies, thickness and surface roughness of PEO films were examined at the edge part and central part separately. Micro-arcs were generated first at the edge part and then moved towards the central part with PEO treatment time, indicating lateral growth of PEO films. The lateral growth resulted in uniform PEO thickness of about 5 ㎛ and surface roughness of about 0.5 ㎛. Moving of the arcs from the edge towards the central part appeared only one time and large size arcs were generated at the edge before completing the central part with small size micro-arcs. This suggests that vertical growth starts before completing the lateral growth. Large size arcs generated at the edge resulted in the formation of relatively large size pores within the PEO films on the AA7050 disc specimen.

• Progress in Medical Physics
• /
• v.15 no.3
• /
• pp.167-172
• /
• 2004

A Siemens HD-270 MLC$^{TM}$, a virtual-micro MLC, allows to the application of a smooth field edge method due to the finite leaf-width of MLC. This technique was implemented into a Pinnacle planning system in order to evaluate the dose distributions during the planning stage. The necessary dosimetric aspects, such as undulation and effective penumbra, were investigated with variations in the resolutions of a virtual-micro MLC and field edge angle. The positional accuracy of the couch movement was also assessed for clinical implementation. The overhead time for planning and treatment was confirmed as negligible.e.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.164-167
• /
• 1997

The treatment setup of patients during irradiation is an important aspect in relation to the success of radiotherapy. Imaging with the treatment beam is a widely used method or verification of the radiation field position relative to the target area, prior to or during irradiation. In this paper, Real time digital radiography system was implemented or verification of local error between simulation plan and radiation therapy machine. Portal image can be acquired by CCD camera, image board and pentium PC after therapy Radiation was converted into light by a metal/fluorescent Screen. The resulting image quality is comparable to film, so the imaging system represents a promising alternative to film as a method of verifying patient positioning in radiotherapy. Edge detection and field size measurement were also implemented and detected automatically for verification of treatment position. Field edge was added to the original image or checking the anatomical treatment verification by therapy technicians. By means of therapy efficiency improvement and decrease of Radiation side effects with these techniques, Exact Radiation treatments are expected.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.130-136
• /
• 2017

Recently, as demand of video processor unit rapidly increases, excellent quality of the video has been required. However, generally, video data occurs the quick flame of video due to various external causes in process of acquisition, treatment, and transmission, and major cause of the quick flame of the video is known as the noise. There are various kinds of noise, which are added to the video, AWGN is a typical one. Thus, this thesis suggested algorithm that treats in three methods by scale of the edge through using edge information of local masks. In case that edge pixel is big, it applied spatial weighting according to equation of straight line about direction of edge pixel. In case that edge pixel is middle, it suggested algorithm with spatial weighting filter and average filter, and for the smooth territory, it suggested algorithm that treats with average filter.