• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.569-576
• /
• 2019

PSC-Edge 거더 라멘교는 Edge 거더에 긴장력을 도입하고 정모멘트를 감소시켜 저형고와 장경간화가 가능한 교량이다. 본 교량은 가설벤트가 상부슬래브의 하부에 지지되고 Edge 거더부에 2차 강연선이 긴장된 후 거더 외측 면에 $45^{\circ}$방향의 사인장 균열이 발생하였다. 프리스트레스 정착부의 응력분포 및 파열균열의 양상에 관한 연구가 활발히 진행되었지만 기존 연구 결과는 본 구조물의 실제 형상과 경계조건이 상이하여 명백한 원인분석이 어려운 실정이다. 따라서 본 논문에서는 가설벤트의 경계조건을 추가로 고려된 3D Frame 해석을 수행하였으나 Edge 거더부에서 최대 압축응력이 발생하여 균열을 원인을 규명하기에는 한계가 있었다. 따라서 LUSAS 16.1을 사용한 3D Solid 해석을 수행하였으며 그 결과 Edge 거더의 하부와 상부슬래브의 경계부분에서 최대 주인장응력이 발생하였다. 최대 주인장응력과 방향여현을 사용하여 둔각부 Edge 거더 외측면의 소요 철근량을 분석한 결과 사용 철근량이 부족한 것으로 분석되었다. 따라서 추가 시공된 교량은 기존 교량보다 정착부의 철근량과 철근보강 범위를 확장시켰다. 그 결과 Edge 거더부의 균열은 더 이상 발생하지 않는 것으로 관찰되었다. 이와 유사한 PSC-Edge 거더 형식의 교량을 설계 및 시공할 때 본문에서 제안한 해석 및 보강방법을 적용하면 시공 중 발생하는 Edge 거더 외측면의 균열을 충분히 제어할 수 있을 것으로 기대된다.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.876-883
• /
• 2009

The radiation of sound from a rectangular plate with a guided edge condition is investigated. By taking this particular boundary condition into account, simple analytical forms of the average radiation efficiency and radiation power based on the modal approach can be found, where the cross-modal terms can average out for all possible point excitation locations. Design variables of the plate such as thickness, aspect ratio, and damping that are closely related to the sound radiation are mainly discussed. The radiation power of the guided plate is found to be governed by the piston mode as well as the critical frequency. While both the radiation efficiency and the radiation power seem to be influenced by thickness and a large aspect ratio, damping loss factor seems less important to the radiation power. It is also shown that no clear corner and edge mode regions may be found for the guided case, unlike the pinned.

• 터널과지하공간
• /
• 제5권1호
• /
• pp.1-10
• /
• 1995

The behavior of a jointed rock mass depends mainly on the geometrical and mechanical properties of joints. The failure mode of a rock mass and kinematics of rock blocks are governed by the orientation, spacing, and persistence of joints. The mechanical properties such as dilation angle, shear strength, maximum closure, strength of asperities and friction coeffiient play important roles on the stability and deformation of the rock mass. The normal and shear behaviour of a joint are coupled due to dilation, and the joint deformation depends also on the boundary conditions such as stiffness conditons. In this paper, the joint constitutive law including the dilatant behaviour of a joint is numerically modelled using the edge-to-edge contact logic in distinct element method. Also, presented is the method to quantify the input parameters used in the joint law. The results from uniaxial compression and direct shear tests using the numeical model of the single joint were compared to the analytic results from them. The boundary effect on the behaviour of a joint is verified by comparing the results of direct shear test under constant stress boundary condition with those under constant stiffness boundary condition. The numerical model developed is applied to a complex jointed rock mass to examine its performance and to evaluate the effect of joint dilation on tunnel stability.

• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.359-364
• /
• 2020

Numerical investigation of the groove trap effect with variation in the groove-edge radius of curvature is presented here. The trap effect is evaluated in a two-dimensional sliding bearing using computational fluid dynamics (CFD). This simulation is based on the discrete phase model (DPM) and standard k - ε turbulence model using commercial CFD software, FLUENT. The numerical results are evaluated by comparisons with streamlines and particle trajectories in the grooves. Grooves are applied to various lubrication systems to improve their lubrication characteristics, such as load carrying capacity increment, leakage reduction, frictional loss reduction, and preventing three-body abrasive wear due to trapping effect. This study investigates the grove trapping effect for various groove-edge radius of curvature values and Reynolds numbers. The particle is assumed to be made of steel, with a circular shape, and is injected as a single particle in various positions. One-way coupling is used in the DPM model because the single particle injection condition is applied. Further, the "reflect" condition is applied to the wall boundary and "escape" condition is used for the "pressure inlet" and "pressure outlet" boundaries. From the numerical results, the groove edge radius is found to influence the groove trap effect. Moreover, the groove trap effect is more effective when applying the groove edge radius.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3116-3121
• /
• 2007

In this paper, the inverse shape design is introduced using the permeable wall boundary condition. Inverse shape design defines the blade shape for the prescribed Mach numbers or pressure distribution on its surface. It calculates the normal mass flux from the difference between the calculated and prescribed pressure at the surface. A new geometry can be achieved after applying the quasi one-dimensional continuity equation from the leading edge to the trailing edge. For validation of this method, two test cases are studied. The first test case of inverse shape design illustrates the cosine bump with a strong shock. After seven geometry modifications, the shock-free bump geometry can be obtained. The second example concerns the redesign of a transonic turbine cascade. The initial isentropic Mach distribution has a peak on the upper surface. The target isentropic Mach number distribution was imposed smoothly. The peak of Mach distribution has disappeared at the final geometry. This proposed inverse design method has proven to be an efficient and robust tool in turbomachinery design fields.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권2호
• /
• pp.76-81
• /
• 2002

A numerical simulation of wake behavior behind three-dimensional wings in ground effect is done using an indirect boundary element method (Panel Method). An integral equation is obtained by applying Green's 2nd Identity on all surfaces of the flow domain. The AIC is constructed by imposing the no penetration condition on solid surfaces, and the Kutta at the wing's trailing edge. The ground effect is included using an image method. At each time step, a row of wake panels from wings' trailing edge are convected downstream following the force-free condition. The roll-up of wake vortices behind wings in close proximity is simulated.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.51-53
• /
• 2004

An analytical method is developed which focused on the end effects for determining the thermal stress distribution in an laminated beam bonded with adhesive layer. This method gives the stress distribution which satisfy the stress-free boundary condition at edge completely. Numerical example, in which an Al-Cu beam bonded with solder(Pb-Sn) is treated, shows that the shear and peeling stresses at the interfaces are significant near the edge and become negligible in the interior region.

• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.37-45
• /
• 2015

PURPOSES : The purpose of this study is to validate the design criteria of the concrete modular road system, which is a new semi-bridge-type concept road, through a comparison of numerical analysis results and actual loading test results under static axial loads. METHODS : To design the semi-bridge-type modular road, both the bridge design code and the concrete structural design code were adopted. The standard truck load (KL-510) was applied as the major traffic vehicle for the design loading condition. The dimension of the modular slab was designed in consideration of self-weight, axial load, environmental load, and combined loads, with ultimate limit state coefficients. The ANSYS APDL (2010) program was used for case studies of center and edge loading, and the analysis results were compared with the actual mock-up test results. RESULTS : A full-scale mock-up test was successfully conducted. The maximum longitudinal steel strains were measured as about 35 and 83.5 micro-strain (within elastic range) at center and edge loading locations, respectively, under a 100 kN dual-wheel loading condition by accelerating pavement tester. CONCLUSIONS : Based on the results of the comparison between the numerical analysis and the full-scale test, the maximum converted stress range at the edge location is 32~51% of the required standard flexural strength under the two times over-weight loading condition. In the case of edge loading, the maximum converted stresses from the Westergaard equation, the ANSYS APDL analysis, and the mock-up test are 1.95, 1.7, and 2.3 times of that of the center loading case, respectively. The primary reason for this difference is related to the assumption of the boundary conditions of the vertical connection between the slab module and the crossbeam module. Even though more research is required to fully define the boundary conditions, the proposed design criteria for the concrete modular road finally seems to be reasonable.

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.374-383
• /
• 2011

A numerical model based on a mode method coupling beams and a rectangular plate is proposed to estimate radiation characteristics of an edge-clamped rectangular plate. The radiation efficiency and radiation power in the audio frequency range including the critical frequency can be predicted. The proposed model is rather simple and straightforward and gives reliable results comparing to the previous studies. The estimated radiation characteristics are compared to those of the pinned condition plates and also to those based on the formulae proposed by Maidanik. The radiation efficiency of the clamped plate seems a little higher than that of the pinned plate in the frequency range of corner and edge modes. It is explicitly shown that the power as well as efficiency at high frequencies is not influenced by these edge boundary conditions.

• 전산구조공학
• /
• 제10권3호
• /
• pp.185-193
• /
• 1997

탄성 선형 경화 재료로 구성된 복합 구조물의 자유 경계면에서 나타나는 응력 특이도를 평면 변형률 상태에서 계산하였다. 자유 표면력 경계조건과 계면 연속조건을 만족해야하는 지배 탄성 방정식은 2점 경계치문제로 정의되며, 일반 고유치 문제의 해인 고유치가 응력 특이도가 될 것이다. 자유경계면 근처에서 응력 성분을 r/sup s-1/에 비례한다고 가정하여 특정한 s(고유치)를 구하는 고유치 문제를 뉴톤향상법과 사격법을 사용하여 수치적으로 해를 구하였다.