• Journal of Radiation Protection and Research
• /
• 제43권3호
• /
• pp.107-113
• /
• 2018

Background: The purpose of our study was to compare the dosimetric advantages of Flattening filter free (FFF) beams for trigeminal neuralgia patients using 4 mm conical collimators over previously treated patients with 6 MV SRS beam. Materials and Methods: A retrospective study was conducted for 5 TN patients who had been previously treated at our institution using frame-based, LINAC-based stereotactic radiosurgery (SRS) on Novalis Tx using 6 MV SRS beam were replanned on 6X FFF beams on Edge Linear accelerator with same beam angles and dose constraints using 4 mm conical collimator. The total number of monitor units along with the beam on time was compared for both Edge and Novalis Tx by redelivering the plans in QA mode of LINAC to compare the delivery efficiency. Plan quality was evaluated by homogeneity index (HI) and Paddick gradient index (GI) for each plan. We also analyzed the doses to brainstem and organ at risks (OARs). Results and Discussion: A 28% beam-on time reduction was achieved using 6X FFF when compared with 6X SRS beam of Novalis Tx. A sharp dose fall off with gradient index value of $3.4{\pm}0.27$ for 4 mm Varian conical collimator while $4.17{\pm}0.20$ with BrainLab cone. Among the 5 patients treated with a 4 mm cone, average maximum brainstem dose was 10.24 Gy for Edge using 6X FFF and 14.28 Gy for Novalis Tx using 6X SRS beam. Conclusion: The use of FFF beams improves delivery efficiency and conical collimator reduces dose to OAR's for TN radiosurgery. Further investigation is warranted with larger sample patient data.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.133-133
• /
• 1998

In the thin film alloy formation of the transition metals ion-beam-mixing technique forms a metastable structure which cannot be found in the arc-melted metal alloys. Sppecifically it is well known that the studies about the electronic structure of ion-beam-mixed alloys pprovide the useful information in understanding the metastable structures in the metal alloy. We studied the electronic change in the ion-beam-mixed ppt-Ct alloys by XppS and XANES. These analysis tools pprovide us information about the charge transfer in the valence band of intermetallic bonding. The multi-layered films were depposited on the SiO2 substrate by the sequential electron beam evapporation at a ppressure of less than 5$\times$10-7 Torr. These compprise of 4 ppairs of ppt and Cu layers where thicknesses of each layer were varied in order to change the alloy compposition. Ion-beam-mixing pprocess was carried out with 80 keV Ae+ ions with a dose of $1.5\times$ 1016 Ar+/cm2 at room tempperature. The core and valence level energy shift in these system were investigated by x-ray pphotoelectron sppectroscoppy(XppS) pphotoelectrons were excited by monochromatized Al K ａ(1486.6 eV) The ppass energy of the hemisppherical analyzer was 23.5 eV. Core-level binding energies were calibrated with the Fermi level edge. ppt L3-edge and Cu K-edge XANES sppectra were measured with the flourescence mode detector at the 3C1 beam line of the ppLS (ppohang light source). By using the change of White line(WL) area of the each metal sites and the core level shift we can obtain the information about the electrons pparticippating in the intermetallic bonding of the ion-beam-mixed alloys.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.91-94
• /
• 2001

This paper presents the analytical investigation pertaining to the local buckling behavior of orthotropic channel section compression members stiffened with unsymmetric stiffeners at its free edges. In the analysis, tile edge stiffener is modeled as a beam element or a plate element. The result of both cases is presented in graphical form so that the effects of edge stiffeners on the local buckling strength of edge stiffened channel section member can be found.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.127-132
• /
• 1999

The inlet pressure build-up at the leading edge of bearings which have discontinuous lubrication surface is analyzed theoretically. The analyses of Inlet pressure build-up is obtained by means of full Navier-stokes equations. Beam-warming method is used to solve navier-stokes equations. The results show that inlet pressure is above atmosphere pressure in front of leading edge of hearing.

• Structural Engineering and Mechanics
• /
• 제34권4호
• /
• pp.475-490
• /
• 2010

It is the intention of this study to synthesize the effects of double-edge cracks on the dynamic characteristics of a beam. The stiffness matrix is first determined for a Timoshenko beam containing two same-line edge cracks. The presented model is then developed for elements with two parallel double-sided cracks, considering the interaction between the stress fields of adjacent cracks. Finally, a finite element code is implemented, to examine the influence of depth and location of double cracks, on the natural frequencies of the damaged system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.30-33
• /
• 1998

In this paper, 60 GHz indoor broadband wireless channels are measured with various configurations in a typical coffice environment. Mesurements are taken at nine positions of the room and the base-station antenna is placed either at the center or at an edge of the measurement room, and the remote-station antenna is either sharp beam or broad beam type. The rms delay spread(RDS) and normalized received power (NRP) are estimated from the measurements. Bit error rate simulations are performed using impulse responses for two measurement positions with QPSK/DQPSK OFDM modulation. Using sharp beam antenna results in superior performances than using broad beam antenna in terms of both bit error rates (BER) and NRP penalty. Also, placing the bese-station antenna at the center is superior to placing it at an edge in terms of BER and NRP.

• 한국의학물리학회지:의학물리
• /
• 제20권4호
• /
• pp.191-198
• /
• 2009

이 연구의 목적은 소조사면 선량계측을 위하여 엣지검출기의 성능을 평가하기 위함이다. 다양한 소조사면과 깊이에서 엣지검출기(Model 1118 Edge)를 이용하여 6 MV 광자선의 선량 직선성, 선량률 의존도, 출력 계수, 선량 측면도 및 심부선량 백분율을 따라 측정하였으며, 이를 표준용적의 이온전리함(CC13)과 광자선 다이오드 검출기(PFD)와 비교하였다. 선량 직선성을 일차 선형 맞춤 함수와 비교하였을 때, 세 검출기 모두 1% 미만의 차이를 나타냈으며, 엣지검출기는 -0.08~0.08%의 가장 낮은 차이를 보였다. 선량율의 변화(100~600 MU/min)에 따라 PFD와 엣지검출기의 정규화된 반응비는 1% 미만의 일정한 값을 보였으나, CC13은 100 MU/min에서 약 -5%의 변화를 나타냈다. 조사면의 크기($4{\times}4\;cm^2{\sim}10{\times}10\;cm^2$)에 따른 출력계수는 세 검출기 모두 거의 같은 값을 보였으나, $4{\times}4\;cm^2$ 이하의 소조사면에서는 엣지검출기와 PFD의 출력 계수가 CC13과 최대 21%의 차이보였다. 각 조사면에서 20~80%의 반음영 폭을 측정하였을 때, 평균적으로 CC13은 엣지검출기보다 2배, PFD는 약 30% 정도 더 넓게 나타났다. 또한 10~90%의 반음영의 경우, CC13과 PFD가 각각 55%와 19% 정도 더 넓은 폭을 나타냈다. 엣지검출기는 선량 측면도의 반치폭이 조사면의 크기와 거의 일치하였으나, 다른 두 검출기는 조사면의 크기보다 약 8~10% 더 크게 나타났으며, 심부선량백분율은 각 조사면에서 세 검출기 모두 거의 일치하였다. 엣지검출기의 성능평가를 위한 선량특성을 분석한 결과, $4{\times}4\;cm^2$ 이하의 소조사면에서 가장 적합한 특성을 나타냈으며, CC13과 PFD와 같은 검출기는 조사면이 작을수록 상당한 오차를 나타낼 수 있음을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.119-120
• /
• 2012

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.63-70
• /
• 2020

As the consumer market in the VR(virtual reality) and the head-up display industry grows, the demand for 5-axis machines and grooving machines using on a ultra-precision machining increasing. In this paper, ultra-precision diamond tools satisfying the cutting edge width of 500 nm were developed through the process research of a focused ion beam. The material used in the experiment was a single-crystal diamond tool (SCD), and the equipment for machining the SCD used a focused ion beam. In order to reduce the influence of the Gaussian beam emitted from the focused ion beam, the lift-off process technology used in the semiconductor process was used. 2.9 ㎛ of Pt was coated on the surface of the diamond tool. The sub-micron tool with a cutting edge of 492.19 nm was manufactured through focused ion beam machining technology. Toshiba ULG-100C(H3) equipment was used to process fine-pattern using the manufactured ultra-precision diamond tool. The ultra-precision machining experiment was conducted according to the machining direction, and fine burrs were generated in the pattern in the forward direction. However, no burr occurred during reverse machining. The width of the processed pattern was 480 nm and the price of the pitch was confirmed to be 1 ㎛ As a result of machining.

• 전산구조공학
• /
• 제25권4호
• /
• pp.63-70
• /
• 2012

This article introduces ADAPT Corporation's latest software product for the integrated multistory analysis and design of concrete buildings, ADAPT Edge. Edge uniquely packages user-friendly modeling of multistory buildings, accurate gravity and lateral analysis, post-tensioning, and detailed slab and beam design, all in one software package. The benefits of Edge over traditional concrete design software are explained.