• Current Research on Agriculture and Life Sciences
• /
• v.25
• /
• pp.13-18
• /
• 2007

The aim of this research is to set improvement guidance a character analysis of woodland edge to cope with the ecological dysfunction of woodland which was caused by massive development project and thoughtless development in country areas. The summary of research result are as follows. 1) From the result of landscape ecology characteristic analysis of woodland in all seven research sites, to begin with, in proportion of appearance by vegetation layer and condition of composition, site 5 showed to be most satisfactory. 2) A width of woodland edge was revealed 7.5m as a minimum, 17.0m as a maximum, and 11.4m as a average and minimum edge was set as 10m according to integrated analysis on each example place. 3) As a result of flexibility analysis, site 1, 2 and 5 was shown high value 3, and it is thought that curve rather than linearity should be maintained in order to increase the ecological function. Also, a phenomenon of straight was prominent, and as a woodland edge, green network and buffering system showed to be somewhat unsatisfactory. 4) Based on the result of character analysis of landscape ecology, main guidelines for improvement of woodland edge were categorized into five in parallel structure and three in vertical structure respectively. The guidelines for improvement of woodland edge suggested by the research has a deep meaning in that it is used as a basic material to induce for controling more systematically or landscape-friendly the defamed forest problems caused by road construction, various development projects, and enlargement of agricultural lands.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.490-494
• /
• 2008

U-Channel Bridge is effective bridge type, because its edge beam performs role of barrier and enables to reduce additional dead loads. Although it is effective to reduce additional dead loads, there is possibility of bridge collapse under impact load due to car crash. Also, edge beam must have ability to induce safe driving and prevent falling accidents. Therefore, it requires behavior analysis and property investigation through the vehicle impact crashing edge beam. This study presents method of structural analysis of U-channel bridge and investigates design specifications for the effect of the edge beam under the vehicle impact. Also, it carries out stability investigation of behavior of edge beam and slab, based on Korean Highway Bridge Design Specifications and AASHTO LRFD Bridge Design Specification.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.4
• /
• pp.27-33
• /
• 2015

Forest ecosystem is considered as an important stepping stone to minimize the impact of climate change. However, the rapid urbanization has caused fragmentation of forest ecosystem. The fragmentation of forest patch results in edge effect which brings about adverse impacts on forest function and structure. Degradation of forest ecosystem decreases carbon sequestration because edge effect reduces productivity. Therefore, we analyzed the impact of forest edge effect on forest ecosystem carbon stock change in Seongnam-si, Gyeonggi-do. We used connectivity analysis to determine forest edge and core area. The field study sites were selected with considering forest age, density, class and soil type. Secondly, forest carbon stock was calculated with allometric equation. The soil carbon stock was derived from Walkely-Black method. Lastly, Mann-Whitney test was conducted to validate differences between carbon stock in edge and core area. As a result of study, the connectivity analysis was effective to determine forest edge and core. The core and edge of forest patch showed different composition of tree species and soil properties. Carbon stock per tree in the edge area was lower than that in the core area. However, the difference of soil organic carbon content between the edge and core were relatively small. This assessment can be applied for the conservation of forest patch as well as quantitative assessment on the forest carbon stock change caused by fragmentation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.11-21
• /
• 2008

A linear and non-linear analysis for plates and shells with arbitrary edge supports subjected to various loading was presented. The 9-node ANS(Assumed Natural Strain) hell element was employed and the spring element, which could express an arbitrary edge support using the six degrees of freedom, was introduced. For the application of his analysis, the plates and shells with various edge supports were analyzed, and the ending behavior with these edge supports were obtained accurately. For these edge supports, particularly elastic edge support was simulated by six springs and reasonable results were obtained. The results show that the present method can be widely used to analyze the bending behavior of plates and shells with arbitrary edge conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1635-1644
• /
• 1993

In this paper, we examine the statistical characteristics of edge enhancing filters and their efficacy as preprocessing operator before edge detection. In particular, edge enhancing filters called the Comparison and Selection(CS), Hachimura-kuwahara(HK), and Selective Average(SA) filters are considered. These filters can reduce noise while producing step-type edges, thus seem to be effective for preprocessing noisy images prior to applying edge detecors. The ability of edge enhancing filters to suppress white Gaussian noise and the error probabilities occured during the edge detection following SA prefiltering are evaluated statistically through numerical analysis. The effect of prefiltering on edge detection is assessed by applying the edge enhancing fitters to a noise image degraded by additive white noise prior to applying the Sobel operator and the Laplacian of Gaussian( LoG ) operator, respectively. It is shown that the edge enhancing filters tend to produce ideal step-type edges while reducing the noise reasonably well, and the use of edge enhancing filters prior to edge detection can improve the performance of subsequent edge detector.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.35-47
• /
• 2010

To complement inaccurate edge information and detect correctly the boundary of a vehicle in an image, an extended edge analysis technique is presented in this paper. The vehicle is detected using the bottom boundary generated by a vehicle and the road surface and the left and right side boundaries of the vehicle. The proposed extended edge analysis method extracts the horizontal edge by merging or dividing the nearby edges inside the region of interest set beforehand because various noises deteriorates the horizontal edge which can be a bottom boundary. The horizontal edge is considered as the bottom boundary and the vertical edges as the side boundaries of a vehicle if the extracted horizontal edge intersects with two vertical edges which satisfy the vehicle width condition at the height of the horizontal edge. This proposed algorithm is more efficient than the other existing methods when the road surface is complex. It is proved by the experiments executed on the roads having various backgrounds.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.2
• /
• pp.82-89
• /
• 2000

Edge detection is the first step and very important step in image analysis. In this paper, proposed edge detection operators based on informations of edge types and it is different from other classical edge detection operators such as gradient and surface fitting operators. The first, we defined characteristics of edge types such as localization, thinness, length. The second, we defined valid edge types and ideal edge pixel positions in $3\times3$window based on edge characteristics of edge types. And we proposed edge detection algorithm and twelve windows based on valid edge types. In specially, proposed algorithm was shown better performence of edge detection than other operators such as gradient operator and the LoG(Laplacian of Gaussian) operator of zero crossings.

• Journal of computational fluids engineering
• /
• v.19 no.4
• /
• pp.75-79
• /
• 2014

In the paper, a study on the analysis of the effects of trailing edge thickness on the aerodynamic characteristics of an airfoil is described. In this research, modification of the formula representing NACA symmetric airfoil is studied to change the airfoil shape with different trailing edge thickness of user's choice. According to the result of aerodynamic characteristics, as the trailing edge thickness increases the maximum lift coefficient increases while the lift-to-drag ratio decreases. In this paper flow calculation results are demonstrated and the analysis on those results and findings on the effects of non-zero thickness of trailing edge are suggested.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.04a
• /
• pp.1-6
• /
• 2001

In this paper, edge delaminations in cracked composite plates are analytically investigated. A theoretical model based upon a sub-laminate approach is used to determine the strain energy release rate, $G^{ed}$, in [$\pm$$\theta_m$/$90_n$]$_s$ carbon/epoxy laminates loaded in tension. The analysis provides closed-form expressions for the reduced stiffness due to edge delamination and matrix cracking and the total energy release rate. The parameters controlling the laminate behaviour are identified. It is shown that the available energy for edge delamination is increased notably due to transverse ply cracking. Also thermal stresses increase substantially the strain energy release rate and this effect is magnified by the presence of matrix cracking. Prediction for the edge delamination onset strain is presented and compared with experimental data. The analysis could be applied to ceramic matrix composite laminates where similar mechanisms develop, but further experimental evidence is required.

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.78-86
• /
• 2005

In this study, cantilever cylindrical shells with edge-stiffeners are analyzed. A versatile 4-node flat shell element which is useful for the analysis of shell structures is used. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. Three models by load conditions are considered. Model A, B and C are loaded by point load at the free edge, line load and external pressure respectively. A various parameter examples are presented to obtain proper stiffened length and stiffened thickness of edge-stiffeners. It is shown that the thickness of shell can be reduced more than 50% for Model A, about $20{\sim}30%$ for Model B by appropriate edge-stiffeners.