• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1712-1714
• /
• 2001

This paper deals with the development and application of an inner corrosion detector for the ACSR(Aluminum Conductor Steel Reinforced) power lines. The detector runs on an ACSR power line and inspects the inner corrosion of the conductor using the technology of the nondestructive eddy current test. It is consists of an ECT sensor, signal processing units, a RF transmitter/receiver, and etc.. The experimental result through field tests shows the detector can efficiently find both the zinc and aluminum loss of ACSR power lines.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.683-684
• /
• 2008

The resistance is frequency dependent by the Seeback effect, loading effect, Eddy current loss, uniformly distributed inductance of the resistance element and uniformly distributed self-capacitance of the resistance element and capacitance between resistance element and it's box. A precise ac resistance measurement system has been developed for using as maintaining and dissemination of national ac resistance standards. The developed resistance measurement system can be used as a instrument of national ac resistance standards at frequency less than 10 kHz and it's measurement accuracy was 0.23(${\mu}{\Omega}/{\Omega}$)+4.2 ${\mu}{\Omega}$ at 1592 Hz and 20 V.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.71-73
• /
• 2008

본 논문에서는 유한요소법을 이용한 전력용변압기의 와전류 손실 해석에 대해 다루고자 한다. 와전류 손실 해석에서 사용할 전력용 변압기 설계 치수는 3D 자계 해석을 통해 검토하였다. 검토한 치수를 바탕으로 전력용 변압기를 2D 모델링하여 와전류 손실 해석을 하였으며, 2D, 3D 두 해석 결과 비교를 통해 와전류 손실에 대해 분석 및 검토하였다.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.180-187
• /
• 2009

When converters operate in megahertz range, the passive components and magnetic devices generate high losses. However, the eddy current issues and choices of magnetic cores significantly affect on the design stage. Apart from that, the components' reduction, miniaturization technique and frequency scaling are required as well as improvement in thermal capability, integration technique, circuit topologies and PCB layout optimization. In transformer design, the winding and core losses give great attention to the design stage. From simulation work, it is found that E-25066 material manufactured by AVX could be the most suitable core for high frequency transformer design. By employing planar geometry topology, the material can generate significant power loss savings of more than 67% compared to other materials studied in this work. Furthermore, young researchers can use this information to develop new approaches based on concepts, issues and methodology in the design of magnetic components for high frequency applications.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.387-392
• /
• 2002

A portable mould oscillation analyzer with an integrated computer, developed by POSCO, records the movement of the mould in every spatial direction. The system uses the gap sensors to measure the mould movement (displacement) in two horizontal directions according to the mould narrow and broad faces and the vertical strokes in the four corners of mould. The gap sensor is a non-contacting minute displacement-measuring device using the principle of high frequency eddy current loss. The mould oscillation diagnostic system integrates the gap sensors, their converters and the industrial portable computer with plug-in data acquisition boards. In an own expert module, which is included in the diagnosis program, one can obtain much information about the mould oscillation equipment.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.9-14
• /
• 2001

On the side of that necessity, it is known that the development of Amorphous metal take effects on lowering eddy current loss in a core system. If a amorphous transformer and a motor to which "Amorphous Metal" is applied be widespread, electricity saving should be enormous with the several hundreds billion won of economic effects like cutting the cost of power plants and the unhealthy gases. This paper carried out general evaluation about the characters of Amorphous metal, the expected energy saving effects of a amorphous transformer, the environmental contribution, the increasement of electricity quality, and the features of harmonic.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.792-793
• /
• 2006

In the paper, the influence of different particle size $D:D>125{\mu}m$, $D<50{\mu}m$ and between on magnetic properties of a standardized dielectromagnetic is presented. The tests were taken at frequencies of between 50Hz, and 500Hz. Presented in the paper results provide important materials property data to allow the selection of the most appropriate dielectromagnetic particle size for different applications.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.394-396
• /
• 1999

ADD has developed a special BLDCM(brushless d.c. motor) that has small size and high power density. The model of BLDCM is like that of advanced nation. Design, production and test carried out by ADD and HYOSUNG Corp.. We simulated back EMF of phase, inductance of line and eddy current loss of rotor after we tested the motor at 80 Kw. According to analysis we have established the performance of 100Kw power recently. There are the same results that we designed.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.228-231
• /
• 1998

Canned-motor of 3-phase induction is to be used for MCP. Its design and analysis are performed considering the effect of eddy-current loss induced in the can. The effect of inverter of canned-motor is also considered as it is controlled by VVVF inverter for two operating points.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.320-326
• /
• 2000

The canned motor of 3-phase induction is used for main coolant pump(MCP). The type of motor is canned-motor that stator and rotor are welded by sealed can. So, cooling water flows in the air gap of the canned motor as an independent cycling cooling system from the air gap to yoke of the motor to prevent high temperature of stator can and to lubricate bearing. Heat exchange is occurred between cooling water in the air gap and cooling water from the exterior pump to prevent rising of temperature in the motor. I has to analyze the characteristics of can exactly because the loss and the heat in the can are very important to design MCP. Therefore, thermal analysis is studied considering the effect of eddy-current los induced in the can.