• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.256-261
• /
• 2017

This paper deals with the experimental evaluation on power loss of a double-side permanent magnet synchronous motor/generator (DPMSM/G) applied to a flywheel energy storage system (FESS). Power loss is one of the most important problems in the FESS, which supplies the electrical energy from the mechanical rotation energy, because the power loss decreases the efficiency of energy storage and conversion of capability FESS. In this paper, the power losses of coreless DPMSM/G are separated by the mechanical and rotor eddy current losses in each operating mode. Moreover, the rotor eddy current loss is calculated by the 3-D finite element analysis (FEA) method. The analysis result is validated by separating the power loss as electromagnetic loss and mechanical loss by a spin up/down test.

• 비파괴검사학회지
• /
• 제11권1호
• /
• pp.7-12
• /
• 1991

The multi-frequency eddy current technique has been used for evaluation of various type of defects in tubings. However, this technique is not sufficient to detect and evaluate the defect in tubings if the defect is located in the geometrically complicated area(e. g. tube support plate, anti-vibration bar, tubesheet area) and mixing residue signal is significant to the defect signal. In order to improve the reliability of the multi-frequency eddy current technique, the effect of the interaction of mixing residue after frequency mixing with a function of distances between the defect and the tube support plate boundary has been analyzed theoretically. The experimental results have been discussed with the theoretical developments. The calculation shows the interaction between the two neighboring signal sources could be significant within the range of approximately 1.0mm with the experimental condition.

• 비파괴검사학회지
• /
• 제13권2호
• /
• pp.94-100
• /
• 1993

이번 호부터 해설란을 통하여 비파괴검사(非破壞檢査) 기술(技術)에 대한 연재를 시작한다. 앞으로 비파괴검사(非破壞檢査) 기술(技術) 각 분야에 대해 다룰 예정이며 우선 1차적으로 와전류탐상법(渦電流探傷法)에 관해 3회에 걸쳐 게재하기로 한다. 특정한 비파괴검사(非破壞檢査)의 전문가가 아니더라도 쉽게 이해할 수 있도록 가급적 수식은 배제하고 기초적인 이론을 소개할 것이며 특히 현장 적용에 중점을 두어 기술(記述)하고자 한다. 본 원고에서는 원거리 와전류탐상법(渦電流探傷法)(remote field eddy current testing) 이나 펄스 와전류탐상법(渦電流探傷法)(pulsed eddy current testing)과 같은 특수 와전류(渦電流) 기술(技術)은 제외하였으며 본 연구실에서 내부 교육용으로 사용하는 "와전류탐상법(渦電流探傷法) Level I 과정"과 미국금속학회에서 발행한 Metal Handbook, 9th ed., Vol. 17, "Non-destructive Evaluation and Quality Control" 및 기타 관련 기술 자료들을 참고하였으나 일일이 명기하지는 않는다.

• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.255-261
• /
• 2007

By using numerical analysis methods, through transmission type pulsed eddy current (PEC) testing is modeled and PEC signal responses due to varying material conductivity, permeability, thickness, lift-off and pulse width are investigated. Results show that the peak amplitude of PEC signal gets reduced and the time to reach the peak amplitude is increased as the material conductivity, permeability, and specimen thickness increase. Also, they indicate that the pulse width needs to be shorter when evaluating the material conductivity and the plate thickness using the peak amplitude, and when the pulse width is long, the peak time is found to be more useful. Other results related to lift-off variation are reported as well.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.727-730
• /
• 2007

Coil inductor has been used widely as an electromagnet, because of the high magnetic filed resulting from the voltage applied to the coil. In this study the coils were used in vibration suppression as an actuator. The control system consists of a coil attached in aluminum beam and a permanent magnet set at its bottom. This actuation method is easy to be incorporated into the system and allows significant forces to be applied without contacting with the structure. Three types of coils (cylindrical type, square type, Circular sheet type) were employed in vibration suppression of cantilever beam. The positive position feedback (PPF) controller was applied to the magnet-coil actuator to suppress the first mode of vibration. Experimental results showed that the cylindrical type and square type coil made good vibration suppression efficiency under PPF controller than their eddy current damper. However, there was minimal difference for the circular sheet type coil if compared with its eddy current damper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1077-1078
• /
• 2011

This paper deals with eddy current analysis of linear switched reluctance motor using analytical method. First, flux density is calculated using analytical method. From flux density, eddy current is analyzed according to moving speed. Finally, analyzed result is compared with finite element method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1019-1020
• /
• 2011

This paper deals with torque analysis of axial flux permanent magnet (AFPM) type eddy current brake (ECB) based on analytical field computation. On the basis of a magnetic vector potential and a two-dimensional (2-D) polar coordinate system, analytical solutions for normal and tangential flux density due to permanent magnet (PM) considering eddy current effect are obtained. And then, using derived analytical field solutions, braking torque and normal force characteristics according to rotor speed are also predicted. A three-dimensional (3-D) finite element (FE) analysis is employed to confirm the validity of analyses.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.98-103
• /
• 2002

In this paper, static analysis of eddy current brake's frame, which is one of key structural components of brake system for high speed train, was performed in order to evaluate the design by computer simulation. Calculation was carried out in general for the driving modes 'braking' and 'frame in upper position(Brakes inactive)'. Several yield stress load cases and fatigue load cases were analysed for each of the driving modes. The fatigue load resulting from the Multi Body System simulation was also taken into consideration. The simulation results shows that some of structural part should be improved for more increasing reliability of frame.

• 한국압력기기공학회 논문집
• /
• 제5권1호
• /
• pp.25-31
• /
• 2009

Steam Generator(SG) tube is an important component of Nuclear Power Plant(NPP), which comprises of the pressure boundary of primary system. The integrity of SG tube has been confirmed by the eddy current test every outage. In Korea, Bobbin probe and MRPC probe have been generally used for the eddy current test. Meanwhile the usage of Array probe has gradually increased in U.S., Japan and other countries. In this study, we investigated the defect detection capability of the Array probe through its preliminary application to SG tube inspection. The Array probe has the equivalent capability in the defect detection and sizing as the conventional methods. Thus it is desirable that the Array probe is generally applied to SG tube inspection in the domestic NPPs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.593-595
• /
• 2001

This paper presents the performances of eddy current brake for the vehicle. Because travelling magnetic field problem of eddy current brake cannot be analyzed accurately in Galerkin finite element method(FEM) for large cell Peclet number, the characteristics are analyzed by using 2-D upwind FEM. The magnet stack width are compensated in order to increase the precision of the solution. The validity of the analysis results is obtained by comparing with experimental data.