• 융복합기술연구소 논문집
• /
• 제6권1호
• /
• pp.13-16
• /
• 2016

The purpose of this study is analysing the characteristics of vehicle fuel economy and greenhouse gase emissions according to driving pattern of drivers. Current fuel economy has not established on official test methods. The difference between actual fuel efficiency and specification fuel efficiency bring up consumer complaints and misunderstandings about fuel economy. Against this background, The country is progressing the study on influence of the fuel efficiency according to variety test conditions. This study analyze the driving pattern of the different drivers and influence of the fuel efficiency according to driving pattern of different drivers.

• 자원ㆍ환경경제연구
• /
• 제22권2호
• /
• pp.329-365
• /
• 2013

본 연구의 목적은 2000-2009년 국가별로 환경과 화석에너지의 제약 하에서 경제와 환경의 효율을 측정하고자 함이다. 본 연구는 국가별 소득수준에 따른 OECD국가, 중고소득국가, 저소득국가 등 세 그룹으로 구분하여, 생산가능집합에서 바람직한 산출물인 GDP와 오염물을 동시에 포함한 '환경지향형, 경제지향형, 환경-경제지향형, Two-stage DEA모형' 등의 네 가지 방법을 제시하여 비교한다. OECD국가는 상대적으로 경제효율성이 높으나 환경효율성은 낮았고 비OECD국가는 환경효율성이 높고 경제효율성이 낮았다. 화석에너지와 온실가스의 저감의 여지는 OECD국가가 더 높았다.

• 디지털산업정보학회논문지
• /
• 제17권4호
• /
• pp.161-175
• /
• 2021

This study analyzed the efficiency and influence factors according to the main research institute type of R&D Program for the local community problem-solving. This study applied data envelopment analysis (DEA) method and Tobit regression analysis by using 20 institutions that participated in R&D Program. The results are summarized as follows. First, Analysis results according to the research institute type of R&D project, Efficient DMUs showed more regional innovation institutions than social economy enterprises. But regional innovation institutions were the lowest in the CCR and BCC model. However, efficiency dose not differ between regional innovation institutions and social economy enterprises. Second, as a result of the analysis relation between efficiency and allocation characteristics of R&D input, the participation of regional innovation organizations as participating organizations has a negative effect on efficiency. It was found that the higher the proportion of government subsidies and the higher the employment rate of the vulnerable, which is a social achievement, the positive effect on efficiency. The implication of this study is that the participation of social economy enterprises as the main R&D institution and government R&D support can provide social economy enterprises with opportunities to accumulate R&D capabilities and experience successful commercialization.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.276-283
• /
• 2024

Currently, the overall tendency for green and sustainable economic development is creating a circular economy. In actuality, agricultural output is currently benefiting greatly from the growth of the circular economy. The creation of a circular economy helps address resource scarcity, save the environment, combat climate change, and increase economic efficiency. Vietnam's economy can grow quickly and sustainably by shifting to a circular economy production model. Comparing prior growth techniques to the digital age and implementing circular economic development connected with high technology will be a fantastic opportunity to boost growth efficiency. In actuality, Vietnam currently has a large number of agricultural circular economy models. These are models: Creating and using gas from waste and wastewater in livestock and farming; model combining cultivation, livestock, and aquaculture; agro-forestry model; garden-forest model; Circular model using agricultural by-products as a catalyst or creating other valuable products; model of moderation, linked to reducing the use of growth hormones, veterinary medications, pesticides, and artificial fertilizers in agriculture and animal husbandry. Unfortunately, there have been few studies and applications of the aforementioned models, which has made it difficult to build the agricultural sector sustainably. In this paper, we outline the current situation and propose solutions to develop a circular economy model in agriculture in Vietnam for sustainable development.

• 사물인터넷융복합논문지
• /
• 제8권5호
• /
• pp.27-31
• /
• 2022

최근에 많은 글로벌 기업들이 글로벌 공급망 구축과 구축된 글로벌 공급망을 기반으로 공유경제를 실현하기 위한 노력을 수행하고 있다. 공유경제를 실현하기 위한 다양한 방법이 있으나 그 중에서도 공유물류시스템를 통한 기업의 공유경제 특히 물류효율화 추진에 많은 노력을 수행하고 있다. 기업의 공유경제를 실현하기 위해서 기업에서는 ICT 기반의 공유물류시스템 적용방안 모색이 요구되고 있다. 이에 본 연구는 물류기업체에서 ICT 기반의 공유경제의 효율을 높이기 위한 물류기업체의 물류효율화 방안을 제시하였다. 이를 위해서 ICT 기반의 공유물류시스템 적용을 위해 국내 공유물류시스템 현황 및 운영에 관해 제시하고, 공유경제 활성화에 따른 공유물류기반 운영 플랫폼 및 ICT 연계를 통한 공유물류서비스 기대효과를 제시하였다. ICT 기반의 공유물류의 효율성 방안 제시를 통한 글로벌 공급망에서 요구되는 다양한 요구를 만족할 수 있을 것으로 판단된다.

• 한국기후변화학회지
• /
• 제7권2호
• /
• pp.177-184
• /
• 2016

Recently, the need for technology development of commercial vehicle fuel consumption has emerged. Fuel economy improvement of transport equipment and transportation efficiency, and increasing attention to the logistics cost reduction measures. Increasing attention to the logistics cost reduction measures by fuel economy improvement of transport equipment and transportation efficiency. In this study, we have installed aerodynamic reduction device (side skirt, boat tail) to 14.5 ton cargo trucks and 45 ft tractor-trailers. And the fuel consumption was compared installed before and after. Fuel economy assessment for the aerodynamic reduction value device was tested by modifying the SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II test in according domestic situation. Greenhouse gas reductions were calculated in accordance with the scenario, including fuel consumption test results. When the 14.5 ton cargo trucks has been equipped with side skirts and boat tail, it confirmed the improvement in fuel efficiency of 4.72%. One Heavy-duty truck's the annual greenhouse gas reductions value are $6.86ton\;CO_2\;eq$. And if applying the technology to more than 50% of registered 15 ton trucks, greenhouse gas reductions are calculated as $686,826ton\;CO_2\;eq./yr$.

• 디지털융복합연구
• /
• 제11권11호
• /
• pp.491-498
• /
• 2013

본 연구의 목적은 훈련된 10명의 사이클 선수와 10명의 트라이애슬론 선수를 대상으로 서로 다른 트레이닝 상태에서 경제성과 효율성을 평가하는 데 있다. 모든 실험자는 50, 100, 150 watts의 자전거 프로토콜로 테스트 한 결과, 두 그룹의 효율성은 현저하게 다르게 나타났으며 철인3종 선수들의 경제성과 효율성이 사이클 선수들보다 더 나은 결과를 보였다. 산소섭취량과 작업량의 적절한 조합은 선수들의 산소부족량을 감소시켜 운동 후 회복기에 이에 맞는 부족량 부분을 다시 상환시킬 수 있을 것이다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.155-161
• /
• 2000

To improve the vehicle fuel economy, various technologies such as improvement of power train efficiency, use of light weight material, improvement of aerodynamic design, have been studied. One of the possible way to improve the vehicle fuel economy is to reduce the engine friction loss by improving the engine oil characteristics. In the present paper, it was examined the effect of the engine oil viscosity and the addition of friction modifier to engine oil on vehicle fuel economy improvements. Moreover, the effect of engine oil degradation on vehicle fuel economy was examined with two gasoline vehicles and one diesel vehicle by using the fuel economy test facility.

• 한국자동차공학회논문집
• /
• 제24권2호
• /
• pp.144-151
• /
• 2016

This study effect of engine oils on regulated fuel economy and emissions including particulate matter (PM) to provide basic data for management of engine oil in vehicles. Three engine oils (Group III base oil, Group III genuine oil with additive package and synthetic oil with poly alpha olefins (PAOs)) were used in one gasoline, one LPG(liquefied petroleum gas) and two diesel vehicles. In the case of diesel vehicles, one is a diesel vehicle without DPF (diesel particulate filter) other is a diesel vehicle with DPF. In this study, the US EPA emission test cycle FTP-75, representing city driving, was used. HORIBA, PIERBURG, and AVL gas analyzers were used to measure the fuel economy and regulated emissions such as CO, NOx, and THC. The number of PM was measured using a PPS (pegasor particle sensor). And, the shape of PMs was analyzed by SEM (scanning electron microscope). The effects of oil type on fuel economy, exhaust gas, and PM were not significant because engine oil consumption by evaporation and combustion in the cylinder is very tiny. Fuel and vehicle type were dominant factors in fuel economy and emissions. HC emission from gasoline vehicles was higher than that from other vehicles and NOx emission from diesel vehicles was higher than that from other vehicles. The number of PM was not affected by the engine oil, but by the driving pattern and fuel. The shapes of the PM, sampled from each vehicle using any test engine oil, were similar.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.157-163
• /
• 2006

A modified ratio control algorithm is proposed for the improvement of the fuel economy for a metal belt CVT. In the modified ratio control algorithm, the CVT ratio is controlled to operate the engine on the optimal operation region which provides the best efficiency from the view point of the overall efficiency of the engine-CVT system. In order to construct the modified ratio map, the CVT system loss model is used by assuming that the all the loss is attributed to the torque loss. It is found from the simulation results that the fuel economy by the modified ratio control algorithm is improved by 5.5 percents compared with the existing ratio control.