• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.165-175
• /
• 2010

Recently, requirement of a long subsea tunnel has increased due to political, economical and social demands such as saving of distribution costs, improvement of traffic convenience, and regional development. Road and railroad tunnel need a shaft for construction and ventilation because of increase of tunnel length. Shaft diameter, lining sectional thickness and rebar quantity have to be determined for design of concrete lining in the shaft. A lot of structural analyses are needed for optimal design of concrete lining considering shaft diameter, load conditions and ground conditions. Design charts are proposed by structural analyses for various conditions in this study. A sectional thickness and rebar quantity can be easily determined using the proposed design charts.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.343-351
• /
• 2017

This study intend to provide basic evidence needed to improve the life satisfaction of disabled children and youth by analyzing factors to influence on their life satisfaction. To accomplish this study's goal, raw data of Survey of Disabled People in 2014 conducted by the Ministry of Health and Welfare was utilized for multiple regression analysis to identify determining factors among family relation satisfaction, domestic violence, type of household, economical conditions, family relationship satisfaction, subjective health status, severity of disability, experience of discrimination, satisfaction on number of friends and school adjustment on 197 disabled children's life satisfaction. Results of the analysis are as follows. Domestic violence, family relationship satisfaction, subjective health status, and satisfaction on number of friends are influencing factors on life satisfaction of disabled children's and youth students. This results shows that strengthening family structure and function, expanding all family members participating program, implementing sociability improvement program and promoting health condition are needed to heighten the life satisfaction of students with disabilities.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.46
• /
• pp.29-60
• /
• 2010

The incentive and reasons to publish FIDIC Conditions of Contract for Design, Build and Operate Projects(DBO Form) are manifold. It is partly a response to the increasing need for sophisticated project delivery methods in both the public and private sectors and the already widespread use of the FIDIC Yellow Book with operation and maintenance obligations and partly a response to the challenge to decrease maintenance cost to a minimum by means of a new procurement route. As a result, FIDIC has developed a new model form to meet this market place requirement. On the other hand, FIDIC did not simply adapt the Yellow Book but has developed a new form from it, whilst preserving the style of the already known FIDIC Forms and maintaining the wording where it was not necessary to change it for the purposes of a DBO Form. Moreover DBO Form fills up supposed gaps in other FIDIC Forms and ameliorates the claim management and dispute management framework. FIDIC DBO approach may be shortly summarized as follows. First, DBO Form provides for single project responsibility. Second, DBO Form has the clear objective of ensuring the use of a most reliable and efficient technology at the lowest life-cycle cost. Third, DBO Form is intended to operate as an effective quality increase in the design and construction of projects. Fourth, DBO Form is intended to provide significant benefits with regard to system integration and reduction of risks. Fifth, DBO Form accelerates and enhances completion schedule compliance. Sixth, DBO takes care of all three supporting pillars of sustainability(including economical, environmental and social elements). DBO Form is obviously a good starting point for negotiations and the preparation of calls for tenders, thus saving the parties time and money. However, existing cultural and legal differences, particular local conditions and the particular needs of some branches of the industry may require the form to be adapted according to the particular needs of a project. And Civil law practitioners are strongly recommended to verify carefully the underlying legal concepts and background of each clause of the General Conditions in order to avoid unnecessary and sometimes unnatural changes and amendments being made. Note that when preparing the Particular Conditions ensure that terminology is consistent and that existing inherent concepts should not be ignored.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.5
• /
• pp.505-510
• /
• 2008

Excess sludge and raw sludge were treated by ball mill in order to promote solubilization, and it was known that the level of solubilization was higher in excess sludge rather than raw sludge. About solid concentration, with the increase of TS, the amounts of solubilization was increased. And excess sludge was solubilized more effectively with the increase of ball mill treatment time. Especially, in case of excess sludge, within 5 min of ball mill treatment, 6 times of solubilization was achieved compared with raw sludge. The effect of bead size was also tested and 1 mm bead was most desirable when applied to the TS 4% of excess sludge. Particle size decrease by the ball mill treatment was more effective in raw sludge, nevertheless the level of solubilization was always higher in excess sludge. This means that the results of particle analysis could not be understood as a indicator for sludge solubilization. Generally, excess sludge and raw sludge are mixed at the thicker in the STP, but considering a ball mill pretreatment as an alternative for sludge solubilization, it is desirable to treat not raw sludge but excess sludge alone in the aspect of solubilization yield and economical process.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.5
• /
• pp.245-253
• /
• 2008

The porous metal material is used for injection metal mold with a great deal of gas production because it makes plenty of gas exhausted through pores formed in the metal mold. A canning HIP method was conventionally used for manufacturing of porous metals, but because of difficulty of process control and high cost of production its application was limited. In this experiment, porous metal mold material was produced by an enhanced vacuum sintering method with simply controlled and economical process and porosities/mechanical properties with variation of sintering temperature and duration time during vacuum sintering were studied. As a result, quality goods were obtained at optimized conditions as follows: sintering temperature of $1230^{\circ}C$, duration time of 2 hr and showed superior properties in wear loss and thermal conductivity and the same properties in hardness, TRS (Transverse Rupture Strength), and thermal expansion coefficient in comparison with those under canning HIP.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.938-947
• /
• 2005

Kenaf basts were double retted by using water and enzyme. The best conditions were enzyme concentration $0.125\%$ and 1 day treatment at $50^{\circ}C$, 4 days treatment at $20^{\circ}C$. It was showed that the double rotting could be more economical and eco-friendly than just water rotting or enzyme rotting. Kenaf fibers have been cottonized by removing lignin and hemicellulose partially. In order to cottonize kenaf fiber, lignin of kenaf fibers were removed by sodium chlorite and then hemicellulose of kenaf fibers were removed by sodium hydroxide. The cottonizing phenomenon of kenaf fibers were was confirmed in transversal and longitudinal photograph of SEM. The tensile strength and crystallinity of cottonized fiber were investigated. The tensile strength and crystallinity were lower as the lignin and hemicellulose of kenaf fibers were less.

• Structural Engineering and Mechanics
• /
• v.24 no.4
• /
• pp.463-478
• /
• 2006

The design of structural frameworks for buildings is constantly evolving and is dependent on regional issues such as loading and constructability. One of the most promising recent developments for low to medium rise construction in terms of efficiency of construction, robustness and aesthetic appearance utilises concrete-filled steel tubular sections as the columns in a moment-resisting frame. These are coupled to rigid or semi-rigid connections to composite steel-concrete beams. This paper includes the results of a pilot experimental programme leading towards the development of economical, reliable connections that are easily constructed for this type of frame. The connections must provide the requisite strength, stiffness and ductility to suit gravity loading conditions as well as gravity combined with the governing lateral wind or earthquake loading. The aim is to develop connections that are stiffer, less expensive and easier to construct than those in current use. A proposed fabricated T-stub connection is to be used to connect the beam flanges and the column. These T-stubs are connected to the column using "blind bolts" with extensions, allowing installation from the outside of the tube. In general, the use of the extensions results in a dramatic increase in the strength and stiffness of the T-stub to column connection in tension, since the load is shared between membrane action in the tube wall and the anchorage of the bolts through the extensions into the concrete.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.49-49
• /
• 2015

Over the past decade, clubroot has emerged as a major constraint to canola (Brassica napus) production in central Alberta, Canada. The number of fields with confirmed P. brassicae infestations in Alberta has increased steadily from 12 in 2003 to nearly 2,000 in 2014. Management of clubroot on canola has focused on sanitization of field equipment, soil amendments to reduce viable pathogen populations, long rotations out of susceptible crops and cropping of resistant cultivars. Clubroot resistance is the most effective and economical method of disease mitigation, but the recent identification of isolated P. brassicae populations with novel virulence phenotypes capable of overcoming resistance in most canola cultivars highlights the variable nature and adaptability of the pathogen. Recent studies have shown slight reductions in pathogen populations through crop rotations, but much more substantial reductions in spore populations in heavily infested areas near field entrances using fumigants such as Vapam (metam-sodium) or Basamid (dazomet). Greenhouse trials showed that seedling emergence, plant height and root weight increased, while primary and secondary infection and disease severity decreased with increased Basamid dosage. However, field trials showed some phytotoxicity. Application of Vapam at rates of 0.4 to $1.6mL\;L^{-1}$ soil resulted in 12-16 fold reductions in clubroot severity and primary and secondary infection. Vapam also was effective in reducing clubroot severity and improving canola seed yield under field conditions. These studies underscore the need for good resistance stewardship and for the integration of multiple products and practices for successful management of clubroot on canola.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.219-225
• /
• 2013

In this study, the tribological characteristics of silver films that were deposited on a glass substrate by electroless plating were investigated. The electroless-plating method has many notable advantages. It is easy and economical to obtain solid films using this coating process, and it can be applied to both nonconducting and conducting substrates. In this study, silver was selected as the electroless-plating material because it is one of the most common materials used as a solid lubricant. The mechanical properties of silver electroless-plated specimens were investigated for various coating conditions. The thickness of the coating could be controlled by varying the electroless-plating time. The properties of the coatings were investigated using AFM, SEM, and a tribotester.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.3
• /
• pp.227-230
• /
• 1991

A comparative study was conducted in total thirty six large while weaner pigs of about 15 kg body weight namely boars, barrows and gilts to evaluate best sex and economic slaughter weight with one standard ration. In 159 days study period feed consumption, growth, feed conversion ratio and carcass quality were judged in all sexes of pigs at 50, 70 and 90 kg body weight. It was noted that upto 70 kg body weight the growth in boars and gills 46.0 and 49.0 kg and feed conversion ratio 4.83 and 4.81 were superior and economical over the barrows, which were 45.5 kg and 4.95. Later on there were too many fluctuations in growth and feed conversion ratio in all sexes of pigs, which would be uneconomical. Carcass quality was also better in boars and gilts than barrows, No boar taint was noted in most of the boar carcasses. Hence it is concluded that boars and gilts can be raised upto the 70 kg body weight for economic pork production.