• Journal of Engineering Education Research
• /
• v.12 no.1
• /
• pp.3-16
• /
• 2009

The purpose of this study is to prepare diverse measures to enhance the utilization of national authorized qualification. The detail objectives of this study are first, to re-establish the utilization scope and range of national authorized qualification through analysis of advance research and theory in various fields of learning on the function of qualification; and second, to set the direction to strengthen the utilization of national authorized qualification. Based on discussions on the various fields of learning on the function of qualification, this study divided the utilization scope of qualification into personal utilization for the benefit of the qualification acquirer him or herself and public utilization for the social and economic benefits. And according to this distinction, we prepared measures to strengthen the utilization of national authorized qualification. First of all, as a way to strengthen personal utilization of the national authorized qualification, we prepared measures to enhance accessibility and facilitate further improvement. As a means to enhance accessibility, we proposed restriction on setting the application condition, diversification of qualification authorization method, facilitation of partial qualification system and minimization of expense required to acquire qualification. Also for the further improvement, we proposed creation of job-level centered grade system and development of job-level centered qualification item by stage. For strengthening the public utilization of national authorized qualification, we come up with ways of strengthening flexibility, transparency, public trust and compatibility. As a way to strengthen flexibility, we proposed establishment of qualification demand monitoring system, expansion of direct participation of users on qualification management, establishment of qualification expiration period and its renewal. For the strengthening of transparency, we proposed to build general qualification information system and to utilize qualification recommendation system. To strengthen public trust, we proposed to strengthen the management of qualification management regulation, secure independency, establish internal audit system and strengthen post management of national authorized qualification. And lastly, we suggested that compatibility comparison standard between qualification and qualification level standard be developed for the strengthening of compatibility.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.113-119
• /
• 2007

This study attempts to find factors contributing to the use pattern of prosthetics by investigating the current condition of prosthetics for the aged of over 65 years old by place of practice. Among those of over 65 years old who live in Gangnam-gu, Seocho-gu, Seongbuk-gu, and Gwanak-gu of Seoul and use the apartment senior's center, those having prosthetics were selected as subjects of this study, and this study was conducted in forms of interview and record. Findings of this study are summarized as follows: First, in regard of the state of prosthetics and relevant symptoms in the mouth according to the place of prosthetics practice, there was significant difference in the questions except the medical benefit of prosthetics between unlicensed facilities and dental clinics and hospitals. Second, regarding difference in satisfaction according to the place of prosthetics practice, dental clinics and hospitals showed a higher level of aesthetic satisfaction than unlicensed facilities. For difference in satisfaction at pronunciation, chewing, pain, a sense of foreign body, and holding power, dental clinics and hospitals showed a higher level than unlicensed facilities, Third, after factor analysis on the perception factors of unlicensed treatment and dental treatment, unlicensed facilities showed the highest level of reliability, and then convenience, word of mouth, and modernity in order. Dental clinics and hospitals also showed the highest level of reliability, however, and then convenience, modernity, and word of mouth in order. Fourth, as a consequence of analyzing the factors to influence the use pattern of prosthetics, regarding residential pattern, there were higher possibilities to use dental clinics and hospitals when the subjects lived together with their children and in Gangnam, and the more were the number of pyeong for the residence, pocket money, medical expense, and property in their name, compared to unlicensed facilities. In conclusion, economic factors appear to be the most important factors in selecting facilities for denture prosthodontics. Therefore, it is important to ensure the denture prosthodontics for the elderly are reimbursable so that they can enjoy a healthier life.

• Korean Journal of Social Welfare
• /
• v.58 no.3
• /
• pp.135-168
• /
• 2006

This study reviewed pension reform's overall characteristic and(anticipated) positive negative effect in OECD countries's and then analysed middle-old age's retirement transition and determinants of full/gradual retirement through the $3{\sim}7th$ Korea Labor and Income Panel considering that Korea has been aging society quickly and it is necessary to suggest not only solution of early retirement and working age reduction but also pension reform. As a result of this study, about 1/4 of 50 years and older have been continuing to work through various pathways after retirement and 98% among fully retired older who passed by re-employment step of occupational status including retirement are still searching for jobs. This showed that it is also inappropriate to typical retirement concept itself on the lines of labour market participation in Korea and part-time/temporary work or self-employment have been used by means of alternatives of maintaining works for middle-old ages. However, the duration of changed occupational status of gradual retirees is mostly only $1{\sim}2$ years. Therefore it is necessary to support the gradual retirement to minimize a term of income insecurity and promote the work of the old ages who have will and capacity of work. Most of all, partial pension system which is main program of gradual retirement, should make the rules that beneficiaries are those who age less than pensionable age and benefit levels should be actuarial fairness together with pension system and provide substantial help. But, the introduction of partial pension system is not the only way to solve and needs overall social economic approach. Especially guarantee the increase of quantitative qualitative employment for middle-old ages linking labor market policy and supporting gradual retirement not ought to be abused to force the part time works and early retirement route against their own will.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.974-984
• /
• 2007

The purpose of this study was to find differences in evaluation criteria and to find differences in preferred images based on benefits segmented groups of jeans products consumers. Male and female Korean university students participated in the study. Quota sampling method was used to collect the data based on gender and a residential area of the respondents. Data from 492 questionnaires were used in the analysis. Factor analysis, Cronbach's alpha coefficient, cluster analysis, one-way ANOVA, and post-hoc test were conducted. As a result, respondents who seek multi-benefits considered aesthetic criteria(e.g., color, style, design, fit) and quality performance criteria(e.g., durability, ease of care, contractibility, flexibility) more importantly when evaluating and purchasing jeans products. Respondents who seek brand name considered extrinsic criteria(e.g., brand reputation, status symbol, country of origin, fashionability) more importantly than respondents who seek economic efciency. Respondents who seek multi-benefits such as attractiveness, fashion, individuality, and utility tend to prefer all the images: individual image, active image, sexual image, sophisticated image, and simple image when wearing jeans products. Respondents who seek fashion are likely to prefer individual image, and respondents who seek brand name more prefer both individual image and polished image. Mean while, respondents who seek economical efficiency less prefer sexual image and polished image.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.12
• /
• pp.1234-1268
• /
• 2004

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.85-97
• /
• 2019

It can be observed that steep slopes ($65^{\circ}$ to $80^{\circ}$) consist of rock masses were kept stable for a long time. In rock-mass slopes with similar ground condition, steeper slopes than 1 : 0.5 ($63^{\circ}$) may be applied if the discontinuities of rock-mass slope are distributed in a direction favorable to the stability of the slope. In making a decision the angle of the slope, if the preliminary rock mass conditions applicable to steep slope are quantitatively setup, they may be used as guidance in design practice. In this study, the above rock mass was defined as a good continuum rock mass and the quantitative setup criterion range was proposed using RMR, SMR and GSI classifications for the purpose of providing engineering standard for good continuum rock mass conditions. The methods of study are as follows. The stable slope at steep slopes ($65^{\circ}$ to $80^{\circ}$) for each rock type was selected as the study area, and RMR, SMR and GSI were classified to reflect the face mapping results. The results were reviewed by applying the calculated shear strength to the stable analysis of the current state of rock mass slope using the Hoek-Brown failure criterion. It is intended to verify the validity of the preliminary criterion as a rock mass condition that remains stable on a steep slope. Based on the analysis and review by the above research method, it was analyzed that a good continuum rock mass slope can be set to Basic RMR ${\geq}50$ (45 in sedimentary rock), GSI and SMR ${\geq}45$. The safety factor of the LEM is between Fs = 14.08 and 67.50 (average 32.9), and the displacement of the FEM is 0.13 to 0.64 mm (average 0.27 mm). This can be seen as a result of quantitative representation and verification of the stability of a good continuum rock mass slope that has been maintained stable for a long period of time with steep slopes ($65^{\circ}$ to $80^{\circ}$). The setup guideline for a good continuum rock mass slope will be able to establish a more detailed setup standard when the data are accumulated, and it is also a further study project. If stable even on steep slopes of 1 : 0.1 to 0.3, the upper limit of steep slopes is 1 : 0.3 with reference to the overseas design standards and report, thus giving the benefit of ensuring economic and eco-friendlyness. Also, the development of excavation technology and plantation technology and various eco-friendly slope design techniques will help overcome psychological anxiety and rapid weathering and relaxation due to steep slope construction.

• (The) Research of the performance art and culture
• /
• no.32
• /
• pp.209-241
• /
• 2016

"Women's Nong-ak (農樂, Traditional Korean music performed by farmers)" was born together with "Maiden group." This study focuses on the reason why women appeared as principal agents of Nong-ak which was almost exclusive to men previously and especially, on the appearance of women Nong-ak Artists who was previously worked in Traditional Drama Troupe. This study empirically deals with details of activities of Maiden's (娘子) Nong-ak troupes and Girls' (少女) Nong-ak troupes through newspaper articles. Women Nong-ak Artists enjoyed popularity with their peculiar attractions. Participating in Nong-ak contests and collecting money for their performances, women Nong-ak Artists learned their skills form masters of Woodo Nong-ak and attracted attention with their colorful costumes. Women of Nong-ak circle especially saw through the trend of the time, expanded their arena of activities and exercised flexibility and ability to react quickly to changing situations while mixing with various genres. In particular, young girls were mobilized to show value and marketability of Korean culture as cultural medium who decorated "Pure Nong-ak art stage." They were no different from "Pretty dolls dancing like angels" who could not purse their interest and economic benefit or incite political cause and their patrons were domestic and overseas political figures. Women artists, who put Nong-ak on the stage in the name of Maiden's (娘子) Nong-ak troupes and Girls' (少女) Nong-ak after the liberation from Japanese colonial rule, contributed to expansion of market base. Women Nong-ak artists, who dominated a century in such troupes as Sadangpae, Hyuprulsa, Maiden's (娘子) Nong-ak troupes, Girls' (少女) Nong-ak troupes and Women Nong-ak troupes, were the very heroines who overturned the conventions of "male predominance (男尊女卑)" which filled Nong-ak arena and cultivated a new tradition of Nong-ak culture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.2
• /
• pp.165-170
• /
• 1994

High quality rapeseed cultivars including Nojeokchae, Yeongsanyuchae Halla-yuchae and Tamrayuchae have been released and recommended as a zero erucic acid variety to Cheju farmers for 13 years, where is a major rapeseed production area in korea. However, rapeseeds produced in Cheju island in 1992 and 1993 contained 47.7% and 37.0% of erucic acid respectively resulting in poor quality oil being not adequate for edible oil. It was considered that the zero erucic acid varieties did not have an opportunity to be cultivated in Cheju island by farmers living in the Island. Thus, the new rapeseed varieties without erucic acid should be bred and recommended to the farmers of southern area of Korea as a multiple cropping crop just after rice harvest, and for large scale mechanized and labour-serving rapeseed culture. The change of rapeseed breeding goal would be desirable for fatty acid composition improvement of rapeseed to develop varieties adaptable to southern part of Korea, and to produce rapeseed oil directly used as an edible oil safely.

• 한국노년학
• /
• v.39 no.3
• /
• pp.467-484
• /
• 2019

The purpose of this study is to explore latent classes of longitudinal medical expenses of older people and to analyze its predictors and its effects on subjective health. Among participants of the Korean Health Panel, the sample of this study includes 1,119 people who is 65-year-old or older and reported their medical expenses for nine consecutive years. The analyses were conducted in three steps. First, Growth Mixture Model (GMM) was applied to find distinct subgroups showing similar patterns in medical expenses. The results showed four groups which were classified as high medical expenditure maintenance group, medical expenditure increase group, low medical expenditure maintenance group, and medical expenditure reduction group. Second, the multinominal logistic regression found that the presence of spouse, economic participation, the number of chronic diseases, and the type of health insurance were significant predictors of latent classes in medical expenses. In particular, the greater the number of chronic diseases, the higher the likelihood of belonging to the high medical expenditure maintenance group. In addition, medical benefit recipients are more likely to belong to the low medical cost maintenance and medical cost reduction groups. Third, multiple regression analysis revealed that the older people in the groups with low or reducing expenses reported better subjective health than people with higher expenses. This study has its meanings in exploring the heterogeneity in longitudinal medical expenses among older people and its predictors and its associations with health outcome. The results of this research provide background information in establishing public health policy for older people.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.3
• /
• pp.115-132
• /
• 2008

Metal industry is one of the most representative heavy industries and the median sales volume of steel and nonferrous metal companies is over one billion dollars in the case America [Forbes 2006]. As seen in the recent business market situation, an increasing number of industrial manufacturers and suppliers are moving from adversarial to cooperative exchange attitudes that support the long-term relationships with their customers. This article presents the results of an empirical study of the antecedent factors of business relationships in metal industry of the United States. Commitment has been reviewed as a significant and critical variable in research on inter-organizational relationships (Hong et al. 2007, Kim et al. 2007). The future stability of any buyer-seller relationship depends upon the commitment made by the interactants to their relationship. Commitment, according to Dwyer et al. [1987], refers to "an implicit or explicit pledge of relational continuity between exchange partners" and they consider commitment to be the most advanced phase of buyer-seller exchange relationship. Bonds are made because the members need their partners in order to do something and this integration on a task basis can be either symbiotic or cooperative (Svensson 2008). To the extent that members seek the same or mutually supporting ends, there will be strong bonds among them. In other words, the principle that affects the strength of bonds is 'economy of decision making' [Turner 1970]. These bonds provide an important idea to study the causes of business long-term relationships in a sense that organizations can be mutually bonded by a common interest in the economic matters. Recently, the framework of structural bonding has been used to study the buyer-seller relationships in industrial marketing [Han and Sung 2008, Williams et al. 1998, Wilson 1995] in that this structural bonding is a crucial part of the theoretical justification for distinguishing discrete transactions from ongoing long-term relationships. The major antecedent factors of buyer commitment such as technology, CLalt, transaction-specific assets, and importance were identified and explored from the perspective of structural bonding. Research hypotheses were developed and tested by using survey data from the middle managers in the metal industry. H1: Level of technology of the relationship partner is positively related to the level of structural bonding between the buyer and the seller. H2: Comparison level of alternatives is negatively related to the level of structural bonding between the buyer and the seller. H3: Amount of the transaction-specific assets is positively related to the level of structural bonding between the buyer and the seller. H4: Importance of the relationship partner is positively related to the level of structural bonding between the buyer and the seller. H5: Level of structural bonding is positively related to the level of commitment to the relationship. To examine the major antecedent factors of industrial buyer's structural bonding and long-term relationship, questionnaire was prepared, mailed out to the sample of 400 purchasing managers of the US metal industry (SIC codes 33 and 34). After a follow-up request, 139 informants returnedthe questionnaires, resulting in a response rate of 35 percent. 134 responses were used in the final analysis after dropping 5 incomplete questionnaires. All measures were analyzed for reliability and validity following the guidelines offered by Churchill [1979] and Anderson and Gerbing [1988]., the results of fitting the model to the data indicated that the hypothesized model provides a good fit to the data. Goodness-of-fit index (GFI = 0.94) and other indices ( chi-square = 78.02 with p-value = 0.13, Adjusted GFI = 0.90, Normed Fit Index = 0.92) indicated that a major proportion of variances and covariances in the data was accounted for by the model as a whole, and all the parameter estimates showed statistical significance as evidenced by large t-values. All the factor loadings were significantly different from zero. On these grounds we judged the hypothesized model to be a reasonable representation of the data. The results from the present study suggest several implications for buyer-seller relationships. Theoretically, we attempted to conceptualize the antecedent factors of buyer-seller long-term relationships from the perspective of structural bondingin metal industry. The four underlying determinants (i.e. technology, CLalt, transaction-specific assets, and importance) of structural bonding are very critical variables of buyer-seller long-term business relationships. Our model of structural bonding makes an attempt to systematically examine the relationship between the antecedent factors of structural bonding and long-term commitment. Managerially, this research provides industrial purchasing managers with a good framework to assess the interaction processes with their partners and, ability to position their business relationships from the perspective of structural bonding. In other words, based on those underlying variables, industrial purchasing managers can determine the strength of the company's relationships with the key suppliers and its state of preparation to be a successful partner with those suppliers. Both the supplying and customer companies can also benefit by using the concept of 'structural bonding' and evaluating their relationships with key business partners from the structural point of view. In general, the results indicate that structural bonding gives a critical impact on the level of relationship commitment. Managerial implications and limitations of the study are also discussed.