• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2017

Recently, building materials and air purification filters with eco-friendly charcoal are actively studying to reduce the concentration of radon gas in indoor air. In this study, radon reduction performance was assessed by designing and producing new panel-type activated carbon filter that can be handled more efficiently than conventional charcoal filters, which can reduce radon gas. For the fabrication of our panel-type activated carbon filter, first the pressed molding product after mixing activated carbon powder and polyurethane. Then, through diamond cutting, the activated carbon filter of 2 mm, 4 mm and 6 mm thickness were fabricated. To investigate the physical characteristics of the fabricated activated carbon filter, a surface area and flexural strength measurement was performed. In addition, to evaluate the reduction performance of radon gas in indoor, the radon concentration of before and after the filter passes from a constant amount of air flow using three acrylic chambers was measured, respectively. As a result, the surface area of the fabricated activated carbon was approximately $1,008m^2/g$ showing similar value to conventional products. Also, the flexural load was found to have three times higher value than the gypsum board with 435 N. Finally, the radon reduction efficiency from indoor gas improved as the thickness of the activated carbon increases, resulting in an excellent radon removal rate of more than 90 % in the 6 mm thick filter. From the experimental results, the panel-type activated carbon is considered to be available as an eco-friendly building material to reduce radon gas in an enclosed indoor environment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.264-271
• /
• 2019

This study was conducted to investigate the effect of whole crop rice based TMR on the meat quality of Korean Native Cattle (Hanwoo). Sixteen Hanwoo steers (average 8 months old) were divided into the control group (commercially marketed TMR) and the WCR-TMR group (whole crop rice based TMR). Feeding trials were carried out up to 30 months of age, and after slaughter, the strip loin were collected and analyzed for meat quality. There were no significant differences in proximate compositions of Hanwoo (P>0.05), and crude protein, crude fat and crude ash were 19.51~20.23 %, 11.53~11.35 % and 1.10~1.12 %, respectively. There was no significant difference in water holding capacity and cooking loss between treatments (P>0.05), but it was slightly lower in the control group. Among the various functional components in meat, β-carotene was not detected, but α-tocopherol was significantly higher in WCR-TMR group and vitamin A content in control (P<0.05). The a^⁎-value in the meat color index decreased significantly with longer storage period in the control group, whereas the WCR-TMR fed group showed no significant difference (P>0.05) according to the storage period. There were no difference between the treatments in the TBARS (2-Thiobarbituric acid reactive substances) value used as an indicator of lipid oxidation and in fatty acid content. But the control group had high myristic acid content, whereas the WCR-TMR supplemented group showed higher oleic acid and linoleic acid content. In conclusion, feeding of WCR based-TMR increased the α-tocopherol content, which is a functional ingredient in meat, and the other components were not significantly different from the control. Therefore, it was judged that there was no significant difference between WCR based and conventional TMR in meat quality characteristics.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.827-833
• /
• 2023

CT(Computed Tomography) contrast agents are commonly used in general hospitals and university hospitals when taking radiographic examinations. The CT contrast medium contains a mixture of a substance called "Iodine", which absorbs radiation energy and makes it appear white in the CT image, further improving the image quality. In addition, the CT contrast agent, which moves like blood in the blood vessels, clearly differentiates it from muscle and water, so CT contrast agents are widely used in hospitals. These CT contrast agents absorb X-rays, but in order to absorb X-rays, they must have a high density or a high radiation absorption coefficient. Since the CT contrast agent is injected into the blood vessels, if the density is high, the blood vessels are strained and the patient is in shock. For this reason, it is necessary to match the density similar to that of water and always pay attention to side effects. In addition, the amount of CT contrast medium is adjusted according to the patient's body shape, and the remaining contrast medium is discarded. However, This study tried to find out the idea of recycling it as a radiation shielding material. Since the CT contrast medium has a high radiation absorption coefficient at a density similar to that of water, the amount to absorb radiation is adjusted, the amount of contrast medium and the amount of water are adjusted, and the amount of radiation absorbed is determined by mixing with water. In addition, a study was conducted to find out the result of the difference in radiation absorption in various ways by comparing the radiation quality coefficient and absorption coefficient with other substances or materials in an environmentally friendly method harmless to the human body by mixing CT contrast medium and water.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.389-396
• /
• 2014

This study was conducted as the basic research for the replacement of Blast Furnace Slag, Red Mud, Silica Fume, etc., with cement as a solution to the problems arising from the global warming caused by the generation of $CO_2$, and conducted the experimental review to examine the feasibility of matrix having properties identical to those of cement by using the Blast Furnace slag, Red mud, Silica fume, and alkali-activator. For this, by using the the inorganic binder, such as Blast Furnace Slag, Red Mud, Silica Fume, etc., and NaOH, $Na_2SiO_3$ and others as the cement substitute material, the strength characteristic according to the mixture time variation was performed in the tentative experiment. Based on the preceding experiment, this study performed the experiment to analyze the strength properties of hardener through the curing by air-dry temperature, curing by temperature in water, coating curing, and Korean paper curing. For the water curing at $80^{\circ}C$, the compressive strength and flexural strength were found to be the most excellent at the age of the 28th day, and furthermore, it was found that the non-cement hardener could be made, which is considered to affect the production of eco-friendly concrete.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.3
• /
• pp.125-131
• /
• 2013

In order to protect agricultural products against damage by physical load, various shock absorbing materials is used. As the demands of environment protection increase, the use of plastic materials have been restricted. On the other hand, Pulp mold products have some benefits - easy manufacturing, superior shock absorbing and eco-friendly. In order to develop pulp mold tray for melon packaging as shock absorbing packaging material, we investigated physical properties and vibration transmission characters of 180, 200 and 220 g pulp mold tray for melon. As the weight of pulp increased, compression strength and shock absorbing performance increased, while vibration transmissibility decreased. Especially in case of 180g pulp mold tray, it is not suitable for melon packaging because the transmitted vibration acceleration was higher than the forced vibration acceleration. And 200g pulp mold tray is suitable for melon packaging because the vibration transmissibility was lowest in three trays. And the vibration acceleration transmitted to the melon in edge of pulp mold tray was higher than to the melon in center of pulp mold tray. As the result of the simulated transportation test, the firmness of melon packaging using pulp mold tray was higher than that of conventional packaging. Therefore, these results suggest that pulp mold tray packaging could be suitable for melon packaging.

• Clean Technology
• /
• v.26 no.3
• /
• pp.177-185
• /
• 2020

All coal ash, generated from coal-fired power plants, is entirely dumped onto a landfill site. As coal ash contains 80% fly ash, a clean floating process was developed in this study to recover useful components from coal ash and to use them as high value-added industrial materials. When the unburned carbon (UC) was recovered from the fly ash, soybean oil, an eco-friendly vegetable oil, was used as collector instead of a non-ionic kerosene collector to prevent the occurrence of odor from the kerosene. After the UC was separated by flotation, particulate ceramic microsphere (CM) was recovered, without generating acidic wastewater, through hydro-cyclone instead of sulfuric acid solution in order to separate ceramic microsphere (CM) and cleaned ash (CA) from the residue. By utilizing soybean oil as a collector, the recovery rate of UC turned high at 85.8% due to the increased adsorption of UC, the high viscosity of soybean oil, and the increase in floating properties caused by the linoleic acid contained in soybean oil. All of the combustible components contained in the recovered UC were carbon components, with the carbon content registering high when soybean oil was used. The recovered UC had many pores with a rough surface; thus, it could be easily ground and then used as an industrial material for its fine particles. The CM and CA recovered by the clean separation process using hydro-cyclone had a spherical shape, and the particles were clearly separated without clumping together. The average diameter (D₅₀) of the particles was 5 ㎛, so it was possible to realize the atomization of CM through a process change.

• Science of Emotion and Sensibility
• /
• v.14 no.3
• /
• pp.385-394
• /
• 2011

The purpose of this research is to compare and analyze visual images between the Real garment and the 3D garment simulation with the various fabrics of flare skirts and to analyze the correlation between mechanical properties and visual images. The picture images (printed on paper) of the Real garment and the 3D garment simulation of experimental flare skirts were shown to the evaluation group of women in their 20s majoring in clothing and textiles, and were evaluated by questionnaires with 32 adjectives. SPSS Version 12.0 statistics program was utilized to analyze data. Factor analysis, One Way ANOVA, T-test and Duncan test were used to investigate visual effect of the Real garment and the 3D garment simulation. As the result of conducting factor analysis on the visual appearance, the images were driven with five factors: 'drapeability', 'attractive', 'body compensation', 'bulkiness', 'activeness'. Visual images were significantly related with mechanical properties of various fabrics, and the visual images between 3D garment simulations and real garment differed with various fabrics and their mechanical properties. Visual images of silk and polyester group, cotton, linen and wool group were significantly related with weight and thickness of kinds of fabrics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.681-688
• /
• 2018

As environmental regulations have been strengthened and high fuel efficiency has been in demand in recent years, the number of ships using natural gas as a fuel is increasing. The demand for ships using LPG or methanol, which are emerging as eco-friendly vessel fuels, is also increasing. In this perspective, ME-LGI engines using LPG or methanol as a fuel have attracted considerable attention. Ships equipped with an ME-LGI engine are required to check the reliability of the fuel injection valve during shipping. This means that the development of a fuel injection valve tester is essential for the commercialization of ME-LGI engine. This study conducted the conceptual design of a fuel injection valve tester for ME-LGI engines using a system engineering process in the order of requirements analysis, functional analysis, and design synthesis. In the requirement analysis stage, the operating process of fuel injection valve was analyzed, and the necessity of checking the sealing oil leakage was then derived. In the functional analysis stage, the functions and flow of them were defined at each functional level. In the design synthesis stage, the equipment for each function was set and the process block diagram based on it was derived. In addition, preliminary risk analysis was performed as a part of system analysis and control, and safety measures were added to the conceptual design. This study is expected to be a good reference material for the concept design of other systems in the future because it shows the application process of a system engineering process to the conceptual design in detail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.615-622
• /
• 2020

Frangible bullets, which are shredded after impact on a target, reduce the possibility of both ricochet and unexpected injury in shooting training and in mission acts in dams, nuclear power plants, and cultural properties. Reducing the levels of hazardous materials in shooting ranges, such as lead, has become an important agenda for the government and environmental groups. In this study, the shape of a frangible bullet was designed for efficient shredding, and the safety and reliability were confirmed by actual firing under different process conditions. In addition, the physical characteristics, such as compaction pressure, density, and frangibility of each process, were compared by analyzing the microstructure of the sintered frangible bullet. The experiment revealed the smallest fragmentation after impact on the target under the following conditions: Cu-Sn 85:15; sintering temperature, 600℃; sintering time, one hour. Further development of the process conditions and experimental methods will contribute to the performance and environmental improvement of a frangible bullet.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.36-43
• /
• 2013

Aralia elata Seem. have a typical traditional significance among the wild herbs traditionally. Edible shoots of A. elata will augment consumer's interest due to its high value functional value, eco-friendly and pesticide-free produce. A. elata's root, fruit and bark are used as material of hypoglycemic agent and medicine for diabetes, kidney trouble, acute hepatitis, rheumation arthritis, stomach cancer and gastroenteric trouble. Flavonoid glycoside compound which is separated from A. elata's shoot shows high antioxidative activity. Also, root's identified active materials of antimicrobial was reported to be produced as food preservative and handy antimicrobial. Therefore, this research investigated quantitative morphological characteristics of leaves, spine and bud in naturally dominated and introducted A. elata in south Korea and then considered its principal compound analysis(PCA) and classification analysis(CA) among the 6 improved cultivars and 19 clones. PCA results showed that it show 76% accumulated explanation from four PC. The A. elata clones were classified into five groups; the first group of 15 clones including Yeongok, the second group of 5 clones including Yeoju, the third group of Bonghwa, Ulleung, the fourth group of Yongmunsa, Boseong and the fifth group of Singu. The object of this study will give us invaluable information about breeding by selection of A. elata in south Korea.