• Journal of Venture Innovation
• /
• v.1 no.1
• /
• pp.197-210
• /
• 2018

The purpose of this study is to analyze the relationship between the induction servicescape and the user satisfaction and repurchase intention about the restaurant tables embedded with the most advanced eco - friendly induction range. The main results of this study are as follows. The demographic characteristics of the respondents were 104 male respondents and 106 female respondents, with male - female ratio almost similar. The respondents' positions and responsibilities consisted of 68 restaurant representatives and 142 restaurant managers or persons in charge. The number of restaurants embedded with the induction ranges staffing 5 or more employees was 62.4%, which clearly showed that they were larger than the average restaurants(2.8 employees). The result of hypothesis testing by regression analysis showed that the restaurant's eco - friendly functional induction servicescape had a significant effect on user satisfaction, and ② the eco - friendly functional induction servicescape of the restaurant had a significant influence on repurchase intention. ③ The operation of the restaurant with the induction of the eco - friendly function of the restaurant. The satisfaction of the manager has a significant influence on the repurchase intention. Therefor, the hypothesis suggested in this study was adopted.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.513-520
• /
• 2017

The application possibility of an alternative new method with low energy consumption was studied for the eco-friendly fabrication of foamed glasses from waste glasses. As a result, fabricating temperature can be reduced under $300^{\circ}C$ without using various expensive inorganic oxidants. The foamed glass can be fabricated at a proper mixing ratio of the waste glass powder, water glass, little surfactant and bubble stabilizer by induction heating method. In the experimental range, the assured optimal condition is 4 min heating on the induction machine with a steel-container ($100mm{\times}100mm{\times}20mm$) and followed by evaporating and drying process for 11 min with 110 g of glass powder, 80 g of water glass, 3 g of surfactant and 0.2 g of bubble stabilizer. When the foamed glass was fabricated at the optimal condition, the density of the glass was $0.85g/cm^3$ and the heat conduction was $0.052W/h{\cdot}K$. In addition, the compressive strength of the glass was above $50kg/cm^2$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.310-313
• /
• 2009

Several high nitrogen stainless steel ingots(100kg) were fabricated with changing Ni and $[N]_2$ contents by Pressurized Vacuum Induction Melting(P_VIM). After free forging process, chemical compositions, microstructure and mechanical properties were estimated. Hardness was increased with the increase of $[N]_2$ content. Furthermore, microstructure including a lot of tempering twins was observed with optical microscope. Mechanical properties were estimated as function of solution treatment temperature and cooling method(air/water) under duration time of 1 hr on sample that were fabricated with Ni content under the atmospheric $[N]_2$ pressure. At solution treatment range of $1050{\sim}1100^{\circ}C$, hardness was decreased with the increase of solution temperature and there were little discrepancy of microstructure and hardness with cooling method. Computer simulation was carried out in order to inspect pass schedule in cold rolling process. When the condition of simulation was roll speed of 2.5mpm, rolling rate $15{\sim}17%$ per pass, it was ascertained that the formation such as deformation by sticking and lamellar sliver etc. was restricted from a simulation.