• Journal of the Korean Society of Food Culture
• /
• v.36 no.6
• /
• pp.531-541
• /
• 2021

This study was conducted to provide basic data for evolving a strategy for the development of Vietnam's customized HMR program and formulating a marketing strategy by analyzing the characteristics and variations of HMR consumption behavior by household size. The results of the analysis were as follows: The number of single households using HMR as a general meal at home was higher than multiple-person households. Moreover, there was a high preference for 'ready to heat' and 'ready to eat' products, which are relatively easy to cook and prepare. It was observed that single households preferred department stores, hypermarkets, and convenience stores for purchasing HMR when compared to multiple households, and that single households preferred to acquire information through TV/radio and internet advertisements. Among the HMR selection attributes, single households valued taste, quantity, price, preparation process, preparation time, and ease of storage as important. Reflecting on the results of this study, when developing HMR in Vietnam, it is necessary to develop a product that can nutritionally replace the general meal with a focus on convenience. In addition, there is a need for products that possess various attributes such as convenience, health, and eco-friendliness.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.561-578
• /
• 2020

The present work addresses the surface integrity and chip morphology in finish hard turning of AISI D3 steel under nanofluid assisted minimum quantity lubrication (NFMQL) condition. The surface integrity aspects include microhardness, residual stress, white layer formation, machined surface morphology, and surface roughness. This experimental investigation aims to explore the feasibility of low-cost multilayer (TiCN/Al2O3/TiN) coated carbide tool in hard machining applications and to assess the propitious role of minimum quantity lubrication using graphene nanoparticles enriched eco-friendly radiator coolant based nano-cutting fluid for machinability improvement of hardened steel. Combined approach of central composite design (CCD) - analysis of variance (ANOVA), desirability function analysis, and response surface methodology (RSM) have been subsequently employed for experimental investigation, predictive modelling and optimization of surface roughness. With a motivational philosophy of "Go Green-Think Green-Act Green", the work also deals with economic analysis, and sustainability assessment under environmental-friendly NFMQL condition. Results showed that machining with nanofluid-MQL provided an effective cooling-lubrication strategy, safer and cleaner production, environmental friendliness and assisted to improve sustainability.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.803-811
• /
• 2020

This study investigates the management of clothes and the perception of up-cycling fashion based on university students majoring in fashion. Results based on 124 survey participants are as follows. First, students prioritized design when buying clothes and regarded texture as important for material. In managing clothes, male students emphasized durability; however, female participants checked fluff occurrence. Second, more than half of the respondents knew what up-cycling fashion was; overall, female students were more aware of up-cycling fashion than males. Few students purchased up-cycling clothes; however, many were willing to buy up-cycling clothes for eco-friendliness, which implies that they understood the relations between up-cycling fashion and environment. Third, pertaining to the perception of SPA fashion, students were highly satisfied with the accessibility of SPA brand stores. The group of students who knew up-cycling fashion were more satisfied with SPA brands and indicated o correlation between the cognition of up-cycling brands and preference for SPA brands. Last, in terms of the perception of environment and clothing, university students majoring fashion recognized the need for environmental protection; however, they did not emphasize environment when purchasing or managing clothes.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.375-391
• /
• 2022

Improving public awareness of wood is crucial for expanding the use of wood and establishing a wood culture. In this study, the environment and trends of the public's wood utilization were analyzed using a questionnaire survey and online text mining at a time when eco-friendly practices are gaining popularity. As a result of reducing climatic and environmental concerns and its positive physical and psychological effects, the use of wood is predicted to rise in areas intimately connected to everyday living, such as wood furniture, wooden structures, and interior materials. Nonetheless, there was a negative awareness that wood was expensive, difficult to maintain, and associated with deforestation. The correlations between wood-related search terms on major Korean portal sites were analyzed and categorized into five groups: Wooden architecture, cultural education, woodworking, wood industry, and wood policy. As a building material, wood was seen as more traditional and friendly than reinforced concrete and stone. Eighty-six percent of respondents expected to utilize wood as a building material in the future, regardless of whether the wood is domestically produced or imported. Sixty-five percent responded favorably about the effects of wood on the health of wooden home inhabitants. It is believed that both active publicity and quantifiable value analysis of human and environmental friendliness are required to increase pro-environment awareness of wood utilization.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.474-480
• /
• 2022

Lithium-ion batteries (LIBs) are powerful energy storage devices with several advantages, including high energy density, large voltage window, high cycling stability, and eco-friendliness. However, demand for ultrafast charge/discharge performance is increasing, and many improvements are needed in the electrode which contains the carbon-based active material. Among LIB electrode components, the conductive additive plays an important role, connecting the active materials and enhancing charge transfer within the electrode. This impacts electrical and ionic conductivity, electrical resistance, and the density of the electrode. Therefore, to increase ultrafast cycling performance by enhancing the electrical conductivity and density of the electrode, we complexed Ketjen black and graphene and applied conductive agents. This electrode, with the composite conductive additives, exhibited high electrical conductivity (12.11 S/cm), excellent high-rate performance (28.6 mAh/g at current density of 3,000 mA/g), and great long-term cycling stability at high current density (88.7 % after 500 cycles at current density of 3,000 mA/g). This excellent high-rate performance with cycling stability is attributed to the increased electrical conductivity, due to the increased amount of graphene, which has high intrinsic electrical conductivity, and the high density of the electrode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.1
• /
• pp.93-97
• /
• 2023

A triboelectric nanogenerator (TENG) is a device that converts mechanical energy into electrical energy, and has been considered as a substitute for continuous power supply due to its high performance, simple structure and eco-friendliness. Recently, it is important to develop a TENG using a non-toxic material in order to use it as a power source for wearable, attachable, and body-embeddable electronics. Here, we developed a human friendly TENG using polyvinyl chloride (PVC) gel containing acetyl tributyl citrate (ATBC), a non-toxic plasticizer. PVC gels were fabricated using various ratios of PVC and ATBC, and optimized by investigating dielectric properties, surface potential, output performance, and durability. The PVC gel based TENG generates output signals of 73 V and 4.3 μA, i.e., a 5-fold enhancement in the output power compared to pristine PVC-based TENG. In addition, the PVC gel can be stretched over 500% of strain. This study is expected to be helpful in the future development of non-toxic wearable TENG.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.154-155
• /
• 2021

Appearance finish is important for amorphous buildings to maximize amorphousness, and GFRC, glass, and metal are mostly used as exterior materials for amorphous buildings currently applied. However, the existing exterior materials showed limitations in amorphous expression, texture, and color expression. In this study, a 3D stereoscopic panel mold was manufactured using the FDM method, one of the 3D printing technologies, and 3D stereoscopic panel production was reviewed using Ultra High Performance Concrete (UHPC), which has excellent physical and mechanical performance and expression. In order to overcome the limitations of unstructured expression, a UHPC 3D stereoscopic panel using the FDM method, one of the 3D printing technologies, was manufactured. Unlike steel molds, FRP molds, and EPS molds, the FDM method can be applied to various materials, and complex shapes are implemented. If it is used using recyclable materials as well as PLA filaments used in the FDM method, it will overcome the limitations of amorphous expression and activate the production of 3D stereoscopic panels that have secured eco-friendliness.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.728-729
• /
• 2015

As environmental issues have been increased globally, eco-friendliness in the construction area, which accounts for more than 30% of total GHG gas emission has being urged. In response, the Korean government has implemented G-SEED(Green Standard for Energy and Environmental Design) certification from 2002. However, total number of certified apartment buildings is only around 1% of total number of approved apartment buildings. As a basic research to find out reasons of low rate of the certification, this paper analyzes consumers' decision-making process in G-SEED certified apartment building market comparing to non G-SEED certified one and draw System Dynamics modeling based on causal relationship. As a result, consumers' demand for the certified one is increased by 'Perceived Relative Utility' which is resulted from comparison process with non-certified one. The 'Perceived Relative Utility' is ascended upward steadily by 'Relative Perceived Price' considered as relatively short-term effect and 'Favorable Image of Certified Housing' referred to long-term effect.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.6
• /
• pp.416-423
• /
• 2023

Recently, the design point of the propeller is gradually changing due to the demand for energy saving and environmental protection. Until recently, self-propulsion model tests were conducted using stock propellers and geometry information was provided to propeller designers, but the range of existing stock propellers did not keep up with the changing design points, and the range of series propellers required in the initial design was also insufficient. Future propeller performance requires high performance and eco-friendliness, and the need for expansion of series propellers has increased. In order to respond to future needs and provide a wide range of advantages in propeller design, KRISO manufactures about 100 series propellers and builds series data through a model tests. In this paper, the approach method for deriving the representative optimal shape to be applied to the 4-blade series propeller in the initial stage of series propeller development was summarized.

• Journal of Fashion Business
• /
• v.27 no.5
• /
• pp.108-120
• /
• 2023

Recently, interest in eco-friendliness and sustainability has been increasing due to the rapid progress of fast fashion and the crisis of sudden environmental changes after COVID-19. This study aims to develop upcycling textiles and express product design using digital 3D to realize a sustainable fashion industry and present environmental aspects, diversity, creativity, and new directions in fashion industry design. The research method is to develop and pattern upcycling textile designs by applying weaving techniques with waste materials. It uses the developed upcycling textile design in digital 3D to incorporate it into clothing fashion and shows the utility and practicality of upcycling textile design. As a result of the study, the appearance is realistic when outputting DTP of upcycling textile design. It endures without loosening or tearing, making it a durable and creatively expressive fashion item. Texpro 3D mapping reduces the time and cost of making actual sample fabric. Upcycling textile design and 3D CLO virtual clothing are combined to produce actual clothing samples, resulting in zero waste reduction due to cutting and sewing. This study anticipates actively and continuously advancing the development of upcycling textile design and digital 3D in terms of ethics and the environment.